REPAIR TO INTERNAL ROAD AT DHAR ROAD MD ACCN UNDER GE ARMY DHAR ROAD

Amount

Scrafying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm, exc 50 mm and not exc 100 mm deep complete all as specified and directed

M&L 7.5 cm thick (compacted thickness) WBM with coarse aggregates of granite, trap or basalt of grading 2 (63 to 40 mm size) spread rolled and consolidated to gradient and camber required complete all as specified and directed

M&L for repairs to pot holes n exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ of 5 kg / 10 sqm, putting in premixed bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 sqm binded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings ), depth of potholes n exc 30mm complete all as specified and directed

Prepairing surfaces of water bound mecadam surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the Cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer @ of 10 Kg/10Sqm using paving bitumen all as specified and as directed

Prepairing surfaces of existing black top surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer @ of 5 Kg/10Sqm using paving bitumen all as specified and as directed

M &L providing bitumenous premixed asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5 % binder contents of paving bitumen VG -10 by weight of total mix, rolled and compacted to requred camber and gradient with 8 to 10 tonne power roller complete all as specified and as directed. Note 1. Semi dense asphaltic concrete shall be laid with mechanical paver self propelled. 2. The semi dense asphaltic concrete shall be mixed with computerised hot mix plant .

Providing and applying hot thermo plastic marking paint for marking white traffic lines 2.5mm thick having clear and sharp edges over road surfaces inluding straight portion, curve portion etc in any position. The thermo plastic mateial shall be homogeneously composed of aggregate pigment resins and glass reflectrorising beads in required percentage as specified. The quoted rate includes cleaning of road surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arrangement for traffic during operation etc. T & P etc required for proper completion of work all as per direction of Engr-in-Charge.

S&F Delineators with plate size 200x80mm on two sides with reflective signs fixed on MS Pipe. Cat Part No DA 952 Make:-Sinor infrastructure or equivalent as approved by Engr-in-Charge

S&F Solar road studs125x125x25mm made from aluminium alloy. Model No DA 110-DHRUV Make:- Sinor infrastructure or equivalent as approved by Engr-in-Charge

S&F in repair convex mirror 800 mm made of PC material with suitable MS pipe post duly powder coated as per site requirement all as specified and as directed.

S&F in repair for cat eye plastic body having two ways reflector with abrasion resistant lens including fixing arrengement as per manufactures instructions etc complete all as specified and dircted. Cat part No DA 971P Make:- Sinor infrastructure or equivalent as approved by Engr-in-Charge

S&F in repair pole mounting type light is provided with one 5.5 meter long 100 mm dia RTS pole connected with any street light pole or other power source all as specified and as directed.

S&F in repair for stainless steel board high intensity reflective sign board made of hardened ACP sheet 2 mm thick POP riveted to stainless steel rectangular pipe of size 50 x 25 mm frame of size 900 x 1200 mm. Frame supported with bolts over 60 mm round 3 mtr long stainless steel pipe of 1 gauge with stainless steel bonded clamp. All stainless steel sheet parts should be polished Sign board should be reflective on both side with wide HIP sheet and overlay film of blue colour with computer cut letters sign and boarder all as specified and directed by Engr-in-Charge.

S&F in repair for guding map sign age of size 6 feet x4feet made of MS rectangular pipe of size 3'x1.5. The front face shall be reflectorised with retro-reflective sheeting (Prismatic and mounted of ACP sheet of 3 mm thickness, The back side of signage shall also be covered with ACP sheet of 3 mm thickness. The entire board shall be covered by a polycarbonate sheet of 2 mm thickness in the front to safe gaurd from scratches, damages, dust and water. The post of 75 mm square pipe are provided duly painted of 1800 mm length fixed with PCC including excavation, returning filling and removal of excess soil all as specified and as directed.

M/S AJAY CHARAK

M/s Ashok Kumar