Block parisar kasganj me Beej godam ke pass swargiya shri Mati Kamlesh Rajput smriti dwar nirman karya

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1

Providing and laying cement concrete in 1:5:10 (1 cement:6 fine sand:12 graded stone ballast 40 mm nominal size) and curing complete including cost of form work in foundation and floors.si no 274

Brick work with 1:4 cement & C. sand mortar in foundation including all material labour and t&p etc complete.SI. No. 6.1.1

R.C.C. work in 1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) SI no. 5.1.2

CLASS - 150 brick work in 1:4 cement and C- sand of 2.25 fineness modulus mortar including supply of all materials,labour and t&p etc. required for proper completion of the work.but in super structure above plinth level up to floor two level(up to two stories) including necessary cutting and moulding of brick work as required SI no.6.4.1

R.C.C. work in 1:1.5:3 cement, coarse sand & 20 mm stone grite in T beam including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) SI no. 5.3

R.C.C. work in 1:1.5:3 cement, coarse sand & 20 mm stone grite in column including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) SI no. 289

Mild steel or iron work in plane work in reinforce concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work and including supply of steel

12mm thick plaster in 1:4 Cement C.Sand mortar i/c all complete SI no 584II

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone Exposed face machine cut and table rubbed with rough backing. as per DSR no. 8.14.24 40mm tick

Letter writting/Engraving on Red sand stone including all respects complete as per market rate

Please Enable Macros to View BoQ information