SPECIAL REPAIR TO BLDG NO 105 AND 106 OR SINGLE LIVING AND OR MESS AT STATIC WKSP EME MHOW UNDER GE AWC MHOW

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level any description complete all as specified and directed.

Demolition of cement concrete (reinforced) in roof and floor other than ground floors complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Description same as per above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but nexc 2 sqm each complete all as specified and directed.

M & L for 20 to 25 mm thick machine cut Kota stone slab flooring, landing,steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing, rounding edge inner and outer and grinding and polishing to achive mirror finish complete all as specified and directed.

M & L for 20 to 25 mm thick machine cut Kota stone slab on vertical surfaces such as skirting, risers of step, dado etc over and including 10mm thick bearing plaster in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and granite polishing complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and directed.

M&L for brick work with fly ash Bricks modular size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces of wall surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface on wall or ceiling as in fins fascias, chajja louveres, parapets and railing exc 60 cm in hight newels , balustrade with chiken wire weish in two layer of plaster in both and finished even and smooth without using extra cement complete all as specified and directed.

M & L applying two coats of white wash on old ceiling including preparation of surfaces complete all as specified and directed.

M & L applying three coats of white wash on new ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old painted on wooden surfaces of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

-Ditto- all as per item No 20 above but on steel surfaces.

M & L Preparation newly plastered surfaces and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for complete removal of existing treatment and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed .

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed .

Supplying,& fixing, jointing and testing 15mm dia bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed .

Supplying,& fixing, jointing and testing 20mm dia bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed .

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. Note :- Pillar tape shall be measured as supply only under respective item

M& L 100mm sizecast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete tybe B-1 (1:2:4) complete .

S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

Supply only 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make : Plumber or equivalent make of Marc/Jaquar.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507 or equivalent make of Marc/Jaquar complete all as specified .

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.. Make : Plumber Cat part No FLP-0203 or equivalent make of Marc/Jaquar complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make : Plumber Cat part No U-0911or equivalent make of Marc/Jaquar. complete all as specified and directed.

S & F in repair swivel shower rose of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe or union Make: Plumber Cat part No. ITP-2101 or equivalent make of Marc/Jaquar.complete all as specified and directed

S & F(in repair) 15 mm dia bore chromium plated concealed stop cock, complete. Make : Plumber Cat Part No. FLP-0405 or equivalent make of Marc/Jaquar. complete all as specified and directed.

S&F (in repairs) Vitreous china wash down water closet, white, Squatting pan ,'Orrisa' pattern size 580mm x 440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified

S & F in repair vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

S & F (in repairs) 75 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints fixed to walls complete all as specified and as directed.

S & F (in repairs) 75 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints laid in trenches complete all as specified and as directed.

S & F (in repairs) 100 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints fixed to walls complete all as specified and as directed.

S & F (in repairs) 100 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints laid in trench complete all as specified and as directed.

S & F (in repairs) 75 mm bore cast iron bends (larger bore measured) complete all as specified.

S & F (in repairs) 100 mm bore cast iron bends (larger bore measured) complete all as specified.

S & F (in repairs) 75 mm bore cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified .

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete.

S & F in repair 25mm dia Powder coated curtain rod fixed with modern bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

S & F in repairs PVC connection 15 mm dia 450 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (any number of panels) with panels of 12 mm made BWP grade BWR plywood. The rail and stile as per IS-1003 (Pat-I) kiln seasoned and chemically pressure treated complete.

S & F factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast, complete with glazing bar, dovetailed or welded complete.

S & F factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast complete with MS flat for fixing wire mesh, dovetailed or welded complete .

Supply only 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete . Note :- Fixing only rate is included in window/door shutter items considered therein

S&F factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S & F butt hinges, medium weight,in 100mm size cold rolled mild steel complete.

S & F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.

S & F 150 mm size aluminium bow handle all as specified.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M & L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L for complete removal of existing treatment and applying two coats of coloured acrylic water emulsion paint over a coat of wall primer (X2) as per the manufacturer's instruction including preparation of old plaster surface complete all as specified and directed. (Note :- Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engg in charge.)

M & L for applying two coats of coloured acrylic water emulsion paint over a coat of wall primer (X2) as per the manufacturer's instruction in newly plastered surfaces complete all as specified and directed. (Note :- Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engg in charge.)

M & L for preparation of newly plaster surfaces of wall and applying three coat of white wash complete all as specified and directed.

Supply and fix framed work such as grills, gratigs, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters; walk ways, railings; framework of water tanks and similar work con-forming to Fe-290 Gde-E-165 complete all as specified and directed.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ beads in square not exc. 0.5 sq m in each pane complete all as specified and directed.

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

Taking down existing treatment along with PCC padding of any thickness and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD in proportion 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete.

M & L 10 mm thick plaster in one layer in CM (1:3) over concrete roof padding, cement mortar mixed with and including chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD mixed in proportion 200 millilitre per 50 Kg cement or STP No. 1 (Liquid) of STP Ltd. in proportion 200 ml per 50 Kg cement as per manufacturers instructions laid when concrete is still green and finishing the surface fair and even without using extra cement complete all as specified and directed.

M & L water proofing treatment on "Non approachable / Non accessible" roof surface or in shunken in following sequence through manufacturer / authorised applicator of the manufacturer complete :- (i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat complete all as specified.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places, laid in alternate ways, surface finished even and fair without using extra cement complete all as specified and directed

M & L for repairing of RCC projection, chajjas, roofs facia, column etc by necessary preparation i.e scrapping, cutting, chiseling and cleaning exposed reinforcement, surfaces of damaged, loosed RCC srfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.50mm graded stone aggregate and reinforced with welded mesh of weight exc 2kg per Sqm but not exc 3kg/sqm with or without facia and finished exc 5Sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member nexc 70mm at any height complete all as specified and as directed. Note : cost of formwork and welded mesh shall be deemed to be included.

S & F 125mm X 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified,

S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

M&L glazed ceramic colour tiles size 300 mm x 200 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete, all as specified.

M&L non skid ceramic colour joint free tiles 7 to 8mm thick (Square/Rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed by Engineer - in -Charge.

M&L vitrified ceramic tiles 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

~do~ but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies 50 mm thick type B0 1:2:4 fixed in CM 1:4 complete all as specified and directed.

M&L for water proofing treatment to sunken surfaces of the slab in the following sequences :-(for 5 year Guarantee) (a) Slope correction by using 1:2:4 (Nominal mix) concrete minimum 25mm thickness at one end and slope of 1:20 by using 12.5mm graded stone aggregate with integral water proofing chemical PIDI PROOF-LW mixed in proportion 200ml/50 kg cement of Dr Fixit of Pidlite Industries Ltd or STP No 1(Liquid) of STP Ltd in proportion 200ml/50 kg cement or equivalent as per manufacturers instructions complete.

Vertical sides plastered in CM 1:3,15mm thick with WPC and 72 hrs testing for water tightness by ponding of water complete.

Application of two coats of seal proof manufactured by M/S Dr Fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hrs complete.

Material and labour for cement concrete 1:5:10 type E2 ( using 40mm graded stone aggregate ) as in filling in sunken floors of toilets complete all as specified.

Demolition and breaking up drain pipe 150mm (SGSW pipe or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for salt glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches joint in CM 1:1 and testing complete all as specified and directed

M&L PCC 1:4:8 tyep D2, using 40mm graed stone aggregate as in bed of drain pipes of 150mm bore including packing under & haunching agaunst the sides of pipes after they are laid & tested, complete all as specified and directed

M & L Pre-cast reinforced cement concrete Type B-1, 1:2:4 20 mm graded stone agg as in cover slabs ( for manholes etc) chullah hoods RCC 1:2:4 type B-1 nominal mix as in manhole cover complete all as specified and directed.

M & L for TMT reinforcement bars 6-8 mm dia including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.9 mm dia, complete all as specified and directed

Solid PVC Door framed of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per speceification & drawings

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top raik & bottom rail. Panelling of plain coloujr PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, all as per specified and directed by Engineer-in -Charge

M&L for precast cement concrete type B-1 1:2:4 (20mm graded stone aggregate ) 40 mm thick RCC Jali and pointed in cement mortar 1:3. including taking down complete.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F pre painted galvalume aluminium zinc coating steel based plain steel sheet 0.50 mm thick of any colour having rensile strength of 550 Mpa as in roof/covering/cladding to wall, fixed with self tapping screws all as specified and as directed at site.

M&L for roof truss (framed) , trussed,purlins crane gantries rails and fastening etc complete all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including taking down carefully copper/alluminium point wiring light, fan, sockets and all fittings and accessories complete all as specified and directed for the following:-

One light / fan /bell controlled by one, one way switch 5/6 Amps

One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including taking down carefully copper/alluminium power point wiring , switches and sockets complete all as specified and directed .

Supply and fixing modular metal flush box 1 module complete all as specified and as directed

Supply and fixing modular metal flush box 3 module complete all as specified and as directed

Supply and fixing modular metal flush box 4 module complete all as specified and as directed

Supply and fixing modular metal flush box 6 module complete all as specified and as directed

Supply and fixing modular metal flush box 8 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 1 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 4 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and as directed

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S/F modular fan regulator 02 module socket type complete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells /Bajaj / Philips

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED fitting 2 feet long complete all as specified and directed. Make:-Havells /Bajaj / Philips

S & F LED bldg security light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:-Havells /Bajaj / Philips

M & L for making hole in existing wall of any thicknesss for insatllation of exhaust fan of size 300/450 mm sweep by dismantling brick work/concrete work manually by mechanically means including removal of malba,making good the wall by plastering in cement mortar 1:4 and finishes as per existing specification complete all as directed at site

Supply and fixing exhaust fans AC single phase 230 volt metalic body of size 300 mm sweep with louver, 900 RPM complete with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection complete all as specified and directed. Make :- Havells / Bajaj /Crompton

Supply and fixing exhaust fans AC single phase 230 volt metalic body of size 450 mm sweep with louver, 900 RPM complete with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection complete all as specified and directed. Make :- Havells / Bajaj /Crompton

Supply only wall mounted fan single phase 230 volt, 400 mm sweep including flexible copper cable for electric connections complete all as specified and as directed.Make :- Havells, Model :- Sameera and equivalent model of bajaj / Usha/CG

S&F MCCB ,DB wall mounted VTPN with provision for facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing 6 way double door including removing old DB with MCCBs and MCBs , fixing the new DB and wall finising complete all as specified and as directed. Make : L&T /HPL /ABB / Indo Asian

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity including removing old DB with MCBs , fixing the new DB and wall finising complete all as specified and as directed Make : L&T /HPL /ABB / Indo Asian

S&F MCCB 3 pole 415 V 125 A 50 Hz with rupturing capacity 25KA. complete all as specified and as directed Make : L&T /HPL /ABB / Indo Asian

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T /HPL /ABB / Indo Asian

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T /HPL /ABB / Indo Asian

Supply and fixing sub main wiring with 2 single core 6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed.

Supply and fix Sheet metal enclosure, SPN, with two pin and earth metal plug and socket, 20 Amps, 240 Volts, including one MCB SP 20 Amps complete all as specified and as directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Jamna Constructions

Goyal Construction

PREMCHAND BHAWANI SAHAI