Design, supply, erection testing and commissioning of 25 KV, Single Phase, AC OHE works in connection with the following works: 1) Construction/Extension of Track Machine Siding at Paras Station (450 Mtr), Bodwad and Borgaon stations (400 Mtr.) 2) Provision of 25KV/240V, 25 KVA AT supply system for Interlocking of LC gate S2 (BD-AMI) on Bhusawal Division 3) Extension of UP & DN loop line at Waghoda station. 4) Shifting of UP & DN AT Supply from Old panel building to New panel building at Chandni station.

A-Extension of Track Machine Siding at Paras Station (450 Mtr). 3715846.90 Below/P

Cement concrete for foundation & plinth in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Cement concrete for foundation & plinth in hard soil & rock. (Foundation should be M- 15 type as per IS-456, i.e ratio 1:2:4)

Preparation / raising of muff of OHE foundation Per Track

Preparation of design & drawing for overhead equipment

Preapration & Supply of Sectioning Diagram Board (With Frame ).

Preapration & Supply of Station Working Rule Diagram (10 copies)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Supply of galvanized small parts steel (SPS).

Erection of galvanized small parts steel (SPS).

Supply of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Erection of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Supply of Hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982.

Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/1181 Rev. G or latest.

Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip SS bolt M-10X30X35mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drg. No. ETI/OHE/P/1192 Mod. C or latest.

Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

Manual erection of overhead equipment (Conventional type).

Supply of Contact wire splice (toothed type) complete with stainless steel stud bolt M-12, 25/20, as per RDSO drg. No. ETI/OHE/P/1080-1 Mod-'C'

Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest.

Splicing & extension of anchored over head equipment.

Supply of OHE termination assembly Conventional type (including insulators)

Erection of OHE termination assembly Conventional type (including insulators)

Supply of 3 pulley type ATD assembly for Conventional type OHE.

Erection of 3 pulley type ATD assembly for Conventional type OHE.

Supply of guy rod assembly

Erection of guy rod assembly

Supply of single earth electrode

Erection of single earth electrode

Supply of PORCELAIN 9 TONNE INSULATOR WITH CREEPAGE DISTANCE-1050MM NO 1 & 2, RI NO 6020-1 OR ITS LATEST

Supply of Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118- 30 3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Drg. No.ETI/OHE/P/ 1110- 2 Rev-E AND RDSO'S SPEC. No. TI/SPC/OHE/ Fittings/0130 (10/13) with A & C Slip No. 1 & ETI/OHE/13(4/84) A & C SLIP NO.1 to 4.

Supply of Catenary Wire Ending Clamp (65 sq mm) with Complete assembly (PART NO.1121, 1094,1092 AND 261) with fastner (Pin & washers) as per RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest

Supply of Large Span Wire Ending Clamp (130) Complete Assembly as per RDSO Drg no: ETI/OHE/P/1140 Rev.B or latest and conforming to RDSO specification no. TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest

Erection of cut-in insulator assembly.

Supply of Copper jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc (Excluding material)

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Painting of "OHE parameters" on OHE structures as per Drwaing No. - BSL/TD/SK-441

Painting of "Location Numbers" on backside of OHE structures as per Drawing no.

Painting of counter weight of ATD by silver paint & painting of location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate.

Transfer of equipment from one mast or support to another including old bracket removal.

Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

Dismantling of OHE termination assembly

Dismantling of any type of ATD

Dismantling of guy rod assembly

Dismantling OHE structures by cutting and transporting to Railway depot including loading and unloading.

Breaking of foundation

100% extra on erection charges for power block work for Erection of galvanised steel for structures

100% extra on erection charges for power block work for Erection of galvanised small parts steel (SPS).

100% extra on erection charges for power block work for Erection of cantilever assembly (Conventional Type, including insulator)

100% extra on erection charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

100% extra on erection charges for power block work for Manual erection of overhead equipment (Conventional type).

100% extra on erection charges for power block work for Splicing & extention of anchored over head equipment.

100% extra on erection charges for power block work for Erection OHE termination assembly Conventional type including porcelain 9-tonne insulators.

100% extra on erection charges for power block work for Erection of 3 pulley type ATD for Conventation OHE

100% extra on erection charges for power block work for erection of cut-in insulator assembly.

100% extra on erection charges for power block work for Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc.

100% extra on erection charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal.

100% extra on erection charges for power block work for Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

100% extra on erection charges for power block work for Dismantling of OHE termination assembly

100% extra on erection charges for power block work for Dismantling of any type of ATD assembly Per Track

Preparation of design & drawing for overhead equipment

Cement concrete for foundation & plinth in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Supply of galvanized small parts steel (SPS).

Erection of galvanized small parts steel (SPS).

Supply of Copper jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc (Excluding material)

Supply of solid core suspension insulator assembly for AT supply

Erection of solid core suspension insulator assembly for AT supply (Excluding material)

Supply of 25 KV DO fuse switch assembly including insulators

Erection of 25 KV DO fuse switch assembly including insulators

Supply of 25 KV / 240 V, 25 KVA AT complete assembly as per RDSO specificatuion

Erection, testing & commissioning of 25 KV / 240 V, 25 KVA AT complete assembly

"Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing."

"Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing."

Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Supply of anti climbing device with GI barbed wire etc for AT mast.

Erection of anti climbing device with GI barbed wire etc for AT mast.

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of 50mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 50mm X 6mm Galvanized Traction Bond

Supply of single earth electrode

Erection of single earth electrode

"Transportation, Trenching, and Laying of LT/HT various size of PVC/XPLE cables along the Railway track"

"Transportation, Trenching and Laying of LT/HT various size of PVC/XLPE cables across the Railway track/Road in RCC Hume Pipe with coller"

Supply of RCC warning cover as per specification.

Laying of RCC warning cover as per specification.

Supply of cast iron cable marker as per drawing.

Erection of cast iron cable marker as per drawing.

Supply of 150 mm size RCC hume pipe along with collar / coupler etc.

Laying of 150 mm size RCC hume pipe along with collar / coupler etc.

Laying of 2 X 185 sq. mm. Al. armoured cable through provided pipe on wall / structure

Laying of 2 X 185 sq. mm. Al. armoured cable by cleating on wall.

Supply of junction box assembly for 25 KVA AT Supply as per drawing.

Erection of junction box assembly for 25 KVA AT Supply as per drawing.

Supply of termination box assembly for 25 KVA AT Supply as per drawing.

Erection of terminationn box assembly for 25 KVA AT Supply as per drawing.

Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification latest.

Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification

Dismantling of LV box assembly

Dismantling of junction box assembly

Dismantling of termination box assembly

Dismentling of Control & Distribution Panel with auto change over switch for CLS supply complete with box including disconnection of cable connection.

Removal of Al.armoured cable cleated on wall.

Dismentling of 10 KVA/25 KVA/50 KVA 'AT' complete with all accessories with DO fuse, jumper

Dismantling OHE structures by cutting & transporting to Railway depot including loading and unloading. Above/

B-Extension of Track Machine Siding at Bodwad Station 5492507.80 Below/P

Cement concrete for foundation & plinth in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Cement concrete for foundation & plinth in hard soil & rock. (Foundation should be M- 15 type as per IS-456, i.e ratio 1:2:4)

Preparation / raising of muff of OHE foundation Per Track

Preparation of design & drawing for overhead equipment

Preapration & Supply of Sectioning Diagram Board (With Frame ).

Preapration & Supply of Station Working Rule Diagram (10 copies)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Manual / with Road Crane Erection of Portal / TTC Boom

Supply of galvanized small parts steel (SPS).

Erection of galvanized small parts steel (SPS).

Supply of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Erection of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Supply of Hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982.

Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/1181 Rev. G or latest.

Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip SS bolt M-10X30X35mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drg. No. ETI/OHE/P/1192 Mod. C or latest.

Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

Supply of Contact wire splice (toothed type) complete with stainless steel stud bolt M-12, 25/20, as per RDSO drg. No. ETI/OHE/P/1080-1 Mod-'C'

Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest.

Splicing & extension of anchored over head equipment.

Supply of OHE termination assembly Conventional type (including insulators)

Erection of OHE termination assembly Conventional type (including insulators)

Supply of 3 pulley type ATD assembly for Conventional type OHE. (Without Counter Weight )

Erection of 3 pulley type ATD assembly for Conventional type OHE.

Erection of anti creep arrangement (Excluding materials).

Supply of guy rod assembly

Erection of guy rod assembly

Supply of single earth electrode

Erection of single earth electrode

Supply of section insulator assembly along with all fittings including Porcelain sectioning insulators & porcelain 9-tonne insulators suitable for conventional type OHE

Erection of section insulator assembly along with all fittings including Porcelain sectioning insulators & porcelain 9-tonne insulators suitable for conventional type OHE

Supply of 25 KV 1600 A single pole isolator assembly with insulators and pad lock (03 keys) with earth heel

Supply of Integral lock for Isolator with 02 nos key.

Erection of 25 KV 1600 A single pole isolator assembly with insulators and earth heel

Supply of 25 KV Post Insulator

Erection of 25 KV Post Insulator

Supply of Large Span Wire 130 Sq. mm (37/2.10mm), Stranded Cadmium Copper Conductor, conforming to RDSO Specification no. TI/SPC/OHE/CAT(Cu-Cd)/0971 or latest.

Supply of Large Span Wire Ending Clamp (130) Complete Assembly as per RDSO Drg no: ETI/OHE/P/1140 Rev.B or latest and conforming to RDSO specification no. TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest

Supply of Copper jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc (Excluding material)

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Painting of "OHE parameters" on OHE structures as per Drwaing No. - BSL/TD/SK-441

Painting of "Location Numbers" on backside of OHE structures as per Drawing no.

Painting of counter weight of ATD by silver paint & painting of location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate.

Transfer of equipment from one mast or support to another including old bracket removal.

Dismantling of OHE termination assembly

Dismantling of any type of ATD

Dismantling of anti creep arrangement

Dismantling of guy rod assembly

Dismantling OHE structures by cutting and transporting to Railway depot including loading and unloading.

Mannual /with Road crane dismantling of Portal / TTC boom

Breaking of foundation

100% extra on erection charges for power block work for Erection of galvanised steel for structures

100% extra on erection charges for power block work for Erection of Portal / TTC boom

100% extra on erection charges for power block work for Erection of galvanised small parts steel (SPS).

100% extra on erection charges for power block work for Erection of cantilever assembly (Conventional Type, including insulator)

100% extra on erection charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

100% extra on erection charges for power block work for Splicing & extention of anchored over head equipment.

100% extra on erection charges for power block work for Erection OHE termination assembly Conventional type including porcelain 9-tonne insulators.

100% extra on erection charges for power block work for Erection of 3 pulley type ATD for Conventation OHE

100% extra on erection charges for power block work for Erection of anticreep arrangement (Excluding materials).

100% extra on erection charges for power block work Erection of Section Insulator assembly for Conventional OHE

100% extra on erection charges for power block work Erection of 25 KV 1600 A single pole isolator assembly with insulators and earth heel.

100% extra on erection charges for power block work for Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc.

100% extra on erection charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal.

100% extra on erection charges for power block work for Dismantling of OHE termination assembly

100% extra on erection charges for power block work for Dismantling of any type of ATD assembly

100% extra on erection charges for power block work for Dismantling of anticreep arrangement (Excluding materials).

100% extra on erection charges for power block work for Dismantling of Portal/TTC boom Per Track

Preparation of design & drawing for overhead equipment

Cement concrete for foundation & plinth in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Supply of galvanized small parts steel (SPS).

Erection of galvanized small parts steel (SPS).

Supply of Copper jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc (Excluding material)

Supply of solid core suspension insulator assembly for AT supply

Erection of solid core suspension insulator assembly for AT supply (Excluding material)

Supply of 25 KV DO fuse switch assembly including insulators

Erection of 25 KV DO fuse switch assembly including insulators

Supply of 25 KV / 240 V, 25 KVA AT complete assembly as per RDSO specificatuion

Erection, testing & commissioning of 25 KV / 240 V, 25 KVA AT complete assembly

"Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing."

"Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing."

Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Supply of anti climbing device with GI barbed wire etc for AT mast.

Erection of anti climbing device with GI barbed wire etc for AT mast.

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of 50mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 50mm X 6mm Galvanized Traction Bond

Supply of single earth electrode

Erection of single earth electrode

"Transportation, Trenching, and Laying of LT/HT various size of PVC/XPLE cables along the Railway track"

"Transportation, Trenching and Laying of LT/HT various size of PVC/XLPE cables across the Railway track/Road in RCC Hume Pipe with coller"

Supply of RCC warning cover as per specification.

Laying of RCC warning cover as per specification.

Supply of cast iron cable marker as per drawing.

Erection of cast iron cable marker as per drawing.

Supply of 150 mm size RCC hume pipe along with collar / coupler etc.

Laying of 150 mm size RCC hume pipe along with collar / coupler etc.

Laying of 2 X 185 sq. mm. Al. armoured cable through provided pipe on wall / structure

Laying of 2 X 185 sq. mm. Al. armoured cable by cleating on wall.

Supply of junction box assembly for 25 KVA AT Supply as per drawing.

Erection of junction box assembly for 25 KVA AT Supply as per drawing.

Supply of termination box assembly for 25 KVA AT Supply as per drawing.

Erection of terminationn box assembly for 25 KVA AT Supply as per drawing.

Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification latest.

Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification

Dismantling of LV box assembly

Dismantling of junction box assembly

Dismantling of termination box assembly

Dismentling of Control & Distribution Panel with auto change over switch for CLS supply complete with box including disconnection of cable connection.

Removal of Al.armoured cable cleated on wall.

Dismentling of 10 KVA/25 KVA/50 KVA 'AT' complete with all accessories with DO fuse, jumper

Dismantling OHE structures by cutting & transporting to Railway depot including loading and unloading. Above/

C-Extension of Track Machine Siding at Borgaon Station (400 Mtr). 7735798.80 Below/P

Cement concrete for foundation & plinth in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Cement concrete for foundation & plinth in hard soil & rock. (Foundation should be M- 15 type as per IS-456, i.e ratio 1:2:4)

Preparation / raising of muff of OHE foundation Per Track

Preparation of design & drawing for overhead equipment

Preapration & Supply of Sectioning Diagram Board (With Frame ).

Preapration & Supply of Station Working Rule Diagram (10 copies)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Manual / with Road Crane Erection of Portal / TTC Boom

Supply of galvanized small parts steel (SPS).

Erection of galvanized small parts steel (SPS).

Supply of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Erection of a single bracket/cantilever assembly suitable for Coventional type OHE with bracket and stay porcelain insulators.

Supply of Hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982.

Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/1181 Rev. G or latest.

Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip SS bolt M-10X30X35mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drg. No. ETI/OHE/P/1192 Mod. C or latest.

Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

Manual erection of overhead equipment (Conventional type).

Supply of Contact wire splice (toothed type) complete with stainless steel stud bolt M-12, 25/20, as per RDSO drg. No. ETI/OHE/P/1080-1 Mod-'C'

Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest.

Splicing & extension of anchored over head equipment.

Supply of OHE termination assembly Conventional type (including insulators)

Erection of OHE termination assembly Conventional type (including insulators)

Supply of 3 pulley type ATD assembly for Conventional type OHE.

Erection of 3 pulley type ATD assembly for Conventional type OHE.

Erection of anti creep arrangement (Excluding materials).

Supply of guy rod assembly

Erection of guy rod assembly

Supply of single earth electrode

Erection of single earth electrode

Supply of section insulator assembly along with all fittings including Porcelain sectioning insulators & porcelain 9-tonne insulators suitable for conventional type OHE

Erection of section insulator assembly along with all fittings including Porcelain sectioning insulators & porcelain 9-tonne insulators suitable for conventional type OHE

Supply of 25 KV 1600 A single pole isolator assembly with insulators and pad lock (03 keys)

Supply of Integral lock for Isolator with 02 nos key.

Erection of 25 KV 1600 A single pole isolator assembly with insulators

Supply of 25 KV Post Insulator

Erection of 25 KV Post Insulator

Supply of PORCELAIN 9 TONNE INSULATOR WITH CREEPAGE DISTANCE-1050MM NO 1 & 2, RI NO 6020-1 OR ITS LATEST

Supply of Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118- 39 3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Drg. No.ETI/OHE/P/ 1110- 2 Rev-E AND RDSO'S SPEC. No. TI/SPC/OHE/ Fittings/0130 (10/13) with A & C Slip No. 1 & ETI/OHE/13(4/84) A & C SLIP NO.1 to 4.

Supply of Catenary Wire Ending Clamp (65 sq mm) with Complete assembly (PART NO.1121, 1094,1092 AND 261) with fastner (Pin & washers) as per RDSO DRG NO.ETI/OHE/P/1120, MOD-B or latest

Supply of Large Span Wire Ending Clamp (130) Complete Assembly as per RDSO Drg no: ETI/OHE/P/1140 Rev.B or latest and conforming to RDSO specification no. TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest

Erection of cut-in insulator assembly.

Supply of Copper jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc (Excluding material)

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Painting of "OHE parameters" on OHE structures as per Drwaing No. - BSL/TD/SK-441

Painting of "Location Numbers" on backside of OHE structures as per Drawing no.

Painting of counter weight of ATD by silver paint & painting of location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate.

Transfer of equipment from one mast or support to another including old bracket removal.

Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

Dismantling of OHE termination assembly

Dismantling of any type of ATD

Dismantling of anti creep arrangement

Dismantling of guy rod assembly

Dismantling of single pole isolator assembly including SPS

Dismantling OHE structures by cutting and transporting to Railway depot including loading and unloading.

Mannual /with Road crane dismantling of Portal / TTC boom

Breaking of foundation

100% extra on erection charges for power block work for Erection of galvanised steel for structures

100% extra on erection charges for power block work for Erection of Portal / TTC boom

100% extra on erection charges for power block work for Erection of galvanised small parts steel (SPS).

100% extra on erection charges for power block work for Erection of cantilever assembly (Conventional Type, including insulator)

100% extra on erection charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

100% extra on erection charges for power block work for Manual erection of overhead equipment (Conventional type).

100% extra on erection charges for power block work for Splicing & extention of anchored over head equipment.

100% extra on erection charges for power block work for Erection OHE termination assembly Conventional type including porcelain 9-tonne insulators.

100% extra on erection charges for power block work for Erection of 3 pulley type ATD for Conventation OHE

100% extra on erection charges for power block work for Erection of anticreep arrangement (Excluding materials).

100% extra on erection charges for power block work Erection of Section Insulator assembly for Conventional OHE

100% extra on erection charges for power block work Erection of 25 KV 1600 A single pole isolator assembly with insulators

100% extra on erection charges for power block work for erection of cut-in insulator assembly.

100% extra on erection charges for power block work for Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc.

100% extra on erection charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal.

100% extra on erection charges for power block work for Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

100% extra on erection charges for power block work for Dismantling of OHE termination assembly

100% extra on erection charges for power block work for Dismantling of any type of ATD assembly

100% extra on erection charges for power block work for Dismantling of anticreep arrangement (Excluding materials).

100% extra on erection charges for power block work for Dismantling of single pole isolator assembly including SPS

100% extra on erection charges for power block work for Dismantling of Portal/TTC boom Above/

D-25 KVA AT supply system for Interlocking of LC gate S2 (BD-AMI) on

Preparation of design & drawing for overhead equipment

Digging, casting, grouting & muffing of foundation including cost of cement and material in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Supply of galvanized small parts steel (SPS)

Erection of galvanized small parts steel (SPS)

Supply of Copper Jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc

Supply of solid core suspension insulator assembly for AT supply

Erection of solid core suspension insulator assembly for AT supply (Excluding material)

Supply of 25 KV DO fuse switch assembly including insulators

Erection of 25 KV DO fuse switch assembly including insulators

Supply of 25 KV / 240 V, 25 KVA AT complete assembly as per RDSO specificatuion

Erection, testing & commissioning of 25 KV / 240 V, 25 KVA AT complete assembly

"Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing."

"Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing."

Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware

Supply of anti climbing device with GI barbed wire etc for AT mast.

Erection of anti climbing device with GI barbed wire etc for AT mast.

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Supply of 40mm X 6mm MS flat for bonding

Fabrication & fixing of 40mm X 6mm MS flat for bonding including painting & hole drilling in rail.

Supply of 50mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 50mm X 6mm Galvanized Traction Bond

Supply of single earth electrode

Erection of single earth electrode

"Transportation, Trenching, and Laying of LT/HT various size of PVC/XPLE cables/across along the Railway track"

Supply of RCC warning cover as per specification.

Laying of RCC warning cover as per specification.

Supply of cast iron cable marker as per drawing.

Erection of cast iron cable marker as per drawing.

Laying of 2 X 185 sq. mm. Al. armoured cable through provided pipe on wall / structure

Laying of 2 X 185 sq. mm. Al. armoured cable by cleating on wall.

Supply of junction box assembly for 25 KVA AT Supply as per drawing.

Erection of junction box assembly for 25 KVA AT Supply as per drawing.

Supply of termination box assembly for 25 KVA AT Supply as per drawing.

Erection of terminationn box assembly for 25 KVA AT Supply as per drawing.

Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification latest.

Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification Above/

E-Extension of UP & DN loop line at Waghoda station. 8782398.80 Below/P

Digging, casting, grouting & muffing of foundation including cost of cement and material in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)

Digging, casting, grouting & muffing of foundation including cost of cement and material in hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4) Per Track

Preparation of design & drawing for overhead equipment Square

Preparation, supply & fixing of sectioning diagram on foam sheet board with vinyl printing & framing

Supply of galvanized steel for structure

Erection of galvanized steel for structure

Extra charges for power block work for Erection of galvanised steel for structures

Erection of Portal / TTC Boom (Manual/with Road Crane)

Extra charges for power block work for Erection of Portal / TTC Boom (Manual/with Road Crane)

Supply of galvanized small parts steel (SPS)

Erection of galvanized small parts steel (SPS)

Extra charges for power block work for Erection of galvanised small parts steel (SPS)

Supply of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators.

Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators

Extra charges for power block work for Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators.

Supply of hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982.

Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/ 1181 Rev. G or latest.

Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip 18 SS bolt M-10X30X35 mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drawing no. ETI/OHE/P/1192 Mod. C or latest.

Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

Extra charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.

Manual erection of overhead equipment (Conventional OHE).

Extra charges for power block work for Manual erection of overhead equipment (Conventional OHE).

Supply of Contact wire splice (Toothed type) complete with stainless steel stud bolt M-12, 25/20, as per RDSO drg. No. ETI/OHE/P/1080-1 Mod-'C'

Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest.

Splicing & extension of anchored over head equipment.

Extra charges for power block work for Splicing & extention of anchored over head equipment.

Supply of termination assembly for Conventional OHE (Including insulators)

Erection of termination assembly for Conventional OHE (Including insulators)

Extra charges for power block work for Erection of OHE termination assembly Conventional OHE (Including insulators)

Supply of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System. (Without Counter Weight )

Erection of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System.

Extra charges for power block work for Erection of 3 pulley type ATD for Conventation OHE as per 2X25 KV AT System.

Erection of anticreep arrangement

Extra charges for power block work for Erection of anticreep arrangement

Supply of guy rod assembly

Erection of guy rod assembly

Supply of Section Insulator assembly along with all fittings including porcelain sectioning insulator & porcelain 9 tonne insulator suitable for Conventional OHE

Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE

Extra charges for power block work Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE

Supply of 25 KV 1600 A Single Pole Isolator assembly with Insulators and pad lock (03 keys)

Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators

Extra charges for power block work Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators

Supply of Integral lock for Isolator with 02 nos key.

Supply of 25 KV Post Insulator

Erection of 25 KV Post Insulator

Supply of single earth electrode

Erection of single earth electrode

Supply of Porcelain 9 Tonne Insulator RI 6020-I (Minimum CD 1050 mm) conforming to RDSO Specification no.T1/SPC/OHE/INS/0070 (04/2007) with A & C Slip no.1 & 2 or latest for Cut-in Insulator/Suspension.

Supply of Contact Wire Ending Clamp (107) as per ID no.1110-2 & DRG.No ETI/OHE/1110-2. Each set comprising of 01 No. contact wiree nding clamp body part no.1118. 01 No. contact wire ending clamp wedge part no.1119 for Cut- in Insulator/Suspension.

Supply of Catenary Wire Ending Clamp (65 Sq.mm) Part No.1121, 1092 &1094 with fasteners as per Drg NO.ETI/OHE/P/1120 Rev-B or Latest for Cut- in Insulator/Suspension

Erection of cut-in Insulator assembly.

Extra charges for power block work for erection of cut-in Insulator assembly.

Supply of Copper Jumper wire (160 sq mm)

Supply of P.G.Clamp (1030-3) complete assembly

Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc

Extra charges for power block work for Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc

Supply of 40mm X 6mm Galvanized Traction Bond

Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond

Supply of Retro reflective type Location number plates.

Erection of Retro reflective type Location number plates including clamps & nut bolt.

Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.

Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.

Painting of "OHE Parameters" on OHE structures as per Drwaing no. BSL/TD/SK-441

Painting of "Location Numbers" on backside of OHE structures as per Drawing no.

Painting of Counter Weight of ATD by Silver Paint & Painting of Location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate.

Transfer of equipment from one mast or support to another including old bracket removal.

Extra charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal.

Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

Extra charges for power block work for Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.

Dismantling of OHE termination assembly

Extra charges for power block work for Dismantling of OHE termination assembly

Dismantling of any type of ATD assembly

Extra charges for power block work for Dismantling of any type of ATD assembly

Dismantling of anticreep arrangement

Extra charges for power block work for Dismantling of anticreep arrangement

Dismantling of guy rod assembly

Dismantling of Section Insulator assembly

Extra charges for power block work for Dismantling of Section Insulator assembly

Dismantling of Single Pole Isolator assembly including SPS

Extra charges for power block work for Dismantling of Single Pole Isolator assembly including SPS

Dismantling of cut-in Insulator assembly.

Extra charges for power block work for Dismantling of cut-in Insulator assembly

Dismantling OHE structures by cutting & transporting to Railway depot including loading and unloading.

Dismantling of Portal / TTC Boom (Manual / with Road Crane)

Extra charges for power block work for Dismantling of Portal / TTC Boom (Manual / with Road Crane)

Breaking of foundation

Erection of copper feeder wire (150 sq.mm.)

Extra charges for power block work for Erection of copper feeder wire (150 sq.mm.)

Supply of 150 sq.mm feeder wire termination assembly

Erection of 150 sq.mm feeder wire termination assembly

Extra charges for power block work for Erection of 150 sq.mm feeder wire termination assembly

"Supply of 9 Tonne insulator & suspension assembly for feeder wire."

Erectionof 9 Tonne insulator & suspension assembly for feeder wire.

Extra charges for power block work for Erection of 9 Tonne insulator & suspension assembly for feeder wire.

Dismantling of 150 Sq. mm Feeder Copper Wire / Cross Feeder wire with insulator including termination & transportation to Railway Depot.

Extra charges for power block work for Dismantling of 150 Sq. mm Feeder Copper Wire / Cross Feeder wire with insulator including termination & transportation to Railway Depot. Above/

F-AT Supply from Old panel buiding to New panel building at Chandni

Preparation of design & drawing for overhead equipment.

Transportation, Trenching, and Laying of LT/HT various size of PVC/XPLE cables along the Railway track

Supply of RCC warning cover as per specification.

Laying of RCC warning cover as per specification.

Supply of cast iron cable marker as per drawing.

Erection of cast iron cable marker as per drawing.

Laying of 2 X 70 sq. mm. Al. armoured cable through provided pipe on wall / structure

Laying of 2 X 70 sq. mm. Al. armoured cable by cleating on wall.

Supply of termination box for CLS cable

Erection of termination box for CLS cable.

Supply of junction box with stand, aluminium busbar etc as per Drawing No. -

Erection of junction box with stand, aluminium busbar etc as per Drawing No. -

Supply of Control & distribution Panel with Auto change over switch, 63 Amp capacity (3 source type) for CLS supply, suitable for 10 KVA 'AT', as per RDSO specification latest.

Erection, testing & commissioning of Control & distribution Panel with Auto change 14 over switch, 63 Amp capacity (3 source type) for CLS supply, suitable for 10 KVA 'AT', as per RDSO specification latest

Supply of single earth electrode

Erection of single earth electrode