Providing Special maintenance repair works at 76 TNGRHS Taylors road

Amount

Painting the old ceiling one coat with cement paint of best approved quality including thorough scrapping the existing old surface, including cost of paint, brushes, scaffolding and labour charges for painting etc., complete in all respects with relevent standard specifications and as directed by departmental officers

Painting the old wall with two coats of I-class plastic emulsion paint of best approved quality and colour incuding cost of paint, brushes, primer, scaffolding, thorough scrapping the old surface etc., compete in all respects with relevant standard specification and as directed by departmental officers.

Painting old wood work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers

Painting old iron work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers.

Removing the following broken electrical materials and refixing the following materials of good quality Anchor make Dyna white with the ISI mark inlcuidng connection , testing and commissioning etc. all complete and as directed by departmental officers.

16Amps switch with indicator (Combined Set)

16Amps switch with universal socket and indicator (Combined Set)

6 amps switch 4 Nos & 1 No socket only (Combined Set)

Removing and refixing the unworkable 6Amps switch 1nos (Combined set)

Removing and refixing the unworkable 6Amps switch 4nos & 1no of socket indicator and fan regulator (Combined set)

AC metal clad 20Amps socket with MCB for AC unit

6Amps switch 1no,socket 1no with indicator (combined set)

Removing and refixing the unworkable 6Amps switch 6nos & 1no of socket only (Combined set)

Fan regulator - Stepped electronic square type

Slant Holder

PVC Round Block

Hylem sheet

Ceiling Fan capacitorr

Removing and replacing the unworkable 9W LED Bulb

Removing the corroded unworkable CP fittings from its position and refixing new metro brand CP fitting with CP flange of best approved quality (Metro brand) including cost of scrap value of old materials labour charges for removing and refixing etc. all complete and as directed by the departmental officers.

CP long body - Bib cock with omega handle 15mm dia with CP flange (Metro brand)

EWC - PVC double flapped Seat cover (Parryware)

Health faucet with 1.50m tube connection (Metro Brand)

PVC waste pipe 1m length

PVC Connection Hose

CP Waste Coupling 20mm dia

Stainless steel Grating 100x 75mm

CP angle cock with CP flange (Metro brand)

CP two way angle cock (Metro brand)

CP piller cock with CP flange (Metrobrand)

Aluminium bracket

Wash basin 550 x 400 mm (parryware)

Supplying and fixing Ornamental Glass Selves (0.50mx0.15m) (straight) with stailess steel beading ,handle of best quality including cost of materials and labour charges etc., all complete.,

Supplying and fixing of Tubelight (LED) of best and approved make with necessary teak wood round block of 75mm dia 40mm deep on walls/ceiling including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

Removing the beyond repair condition ceiling fan for position and refixing new crompton Greaves 48" sweep ceiling fan (1200mm) without regulator of good quality including cost of all new materials and labour charges for removing and refixing and scrap value of old material etc. complete and as directed by the departmental officers.

Removing old damaged Flush door and supplying and fixing of 35mm thick solid core shutter of best approved quality with ISI mark using well seasoned hard wood of width not exceeding 25mm and 3mm thickwood plywood on both side hot pressed and teakwood lipping all-round including cost of flush door and necessary brass furniture fittings such as 200mm tower bolt,250mmx16mm Aldrop,125mm hinges, heavy duty door stopper,Brass handle with brass screws and painting with two coats of 1st class SEP with primer labour charges for removing old door and fixing new door etc., complete in all respects and as directed by the departmental officers

Run off mains 4 wires of 4 Sqm.mm copper insulated single core multi strand fire retardent 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 continous earth by means of 2.5SQ.mm copper PVC insulated unsheathed single core multi starnd fire retardant 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 in fully concealed 19mm/20mm dia rigid PVC connduit pipe heavy duty complete and as directed by the departmental officers

Providing and fixing magnetic door catcher best quality including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers.

Removing the damaged unworkable entrance door lock from its position and refixing new mortise lock, brass Décor type 6 levers lock with keys including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers. (The brand shall be got approved by the EE & Ad.O before supply)

Providing new brass door stopper of heavy type for replacing the existing damaged door stopper including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers.,,,

Removing and Refixing Service door frames and shutters for making good movement of shutter for closing and opening position by engaging carpenter including cost of hire charges for plaining materials and labour charges etc. all complete and as directed by the departmental officers.

Servicing the existing PVC door of replacing the aldrops-1nos,Al.butt hinges,PVC synthetic solution for refixing the PVC door portion etc including cost of materials and labour charges for removing and refixing etc. all complete and as directed by the departmental officers.

Providing additional19mm thick BWR grade plywood plank for ward robe cupboard with lipping alround painting the same with two coats of synthetic enamel paint of best approved quality including cost of all materials ,labour for fixing,painting etc., complete with standard specification and as directed by the departmental officers

Supplying and fixing of Fiber Netlon of best and approved quality to windows and openings including cost of netlon, Velcro and nails and lobour charges for stitching & fixing etc. all complete and as directed by departmental officers.

Supplying and Fixing of Teak wood reeper of size 50mm x 25mm to withstand the Netlon in the existing Aluminium windows alround including the cost of teak wood reeper and labour for fixing in the position complete.and as directed by the departmental officer

supplying and fixing of 19mm plywood BWR grade BOX TYPE cupboard with necessary beading,lamination sheet ,Italian hinges,ornamental handle,brass lock,fevicol, etc., all complete and as directed by the departmental officers.

Sub Total

GST at 18%

Sabari Designs (BID ID -1560291)