PERIODICAL SERVICES AND REPAIR REPLACEMENT TO JOINERY FALSE CEILING WALL PANELING OF CERTAIN BLDG OF 19 AD 707 TSU 955 WKSP AND 50 LT BTY OF ZONE B AREA AT GMS UNDER GE I GOS

Amount

Taking down chowkhats with shutters not exc. 1.5sqm each complete all as specified & directed.

Taking down chowkhats with shutters exc. 1.5sqm but.not exc. 4 sqm each complete all as specified & directed..

Taking down shutters of any description not exc. 1 sq.m each. complete all as specified & directed.

Taking down shutters of any description exc. 1 sq.m not exc. 2 sq.m each. complete all as specified & directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified & directed.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified & directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified & directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified & directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS Tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC Sheets for top rails lock rail & bottom rail on eighter side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , suppling & fixing in the frame at site complete and all as specified and directed

M/L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified & directed.

M/L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified & directed.

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design including welding of Fe 290 Grade E-165 complete all as specified & directed.

S&F 100mm size butt hinges extruded aluminium alloy with alloy with galvanised mild steel hinge pin, complete all as specified & directed.

S&F 75mm size butt hinges medium weight (ISI Marked), extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type-C21 complete all as specified & directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F in repair 100mm size butt hinges extruded aluminium alloy with alloy with galvanised mild steel hinge pin, complete all as specified & directed.

S&F in repair 75mm size butt hinges medium weight (ISI Marked), extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type-C21 complete all as specified & directed.

S&F in repair150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F in repair100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F in repair 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F in repair 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified & directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed.

S& F in repair double action floor spring Hydraulically regulated made up of Min 1.25 mm thick aluminium alloy sheet foundation Box Main Body with stainless steel cover governing Pivot made of brass, other parts made of mild heavy duty and fixed complete all as specified & directed.

S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified & directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue,anodisied,with hard drawn steel spring, fixed in floors complete all as specified & directed.

S&F 250mm Aluminium alloy,anodisied,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F in repair 250mm Aluminium alloy,anodisied,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

Providing and fixing factory made uPVC white colour casement ( Openable) Door made of extruded profiles with wall thickness of 2.3 mm (+-0.2 mm) window profile with hollow section with multi chamber . Frame (60 mm × 58 mm) sash (60 mm × 78 mm). T- Profile (one vertical length in two shutters)(60mm x 74mm) Glazing bead (35 mm × 20 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanized steel Frame (28 mm × 21.5 mm) sash (31mmx27mm) T- Profile(27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm × 100 mm long fasteners. HARDWARE: (Casement door handle made of zinc alloyed (white coloured coated),corner striker,secondary striker,cylinder,Door transmission gear made of mild steel with multi point locking system with strikes,3D Hinges of Zinc alloyed(white coated powder). ] (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (88mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (42x57mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories. Note : The unit rate includes cost of glass and all other connected accessories).

Dismantling wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets, complete all as specified & directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two equal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour printed PVC Sheet inclusive of solvent cement and fixing at site on PVC Frame complete all as specified & directed.

M&L for applying 2mm thick wall care Putty in two layers on ceiling surfaces absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete complete all as specified and directed.

M&L applying two coats of Plastic Emultion Paint on ceiling complete all as specified and directed.

S&F 12mm thick toughened glass(Plain) door shutters having all necessary fixing/holdings arrangements like- Handles,Hyd floor door spring,Pivots,Spiders fittings.The edges of glass to be Chamfered,rounded and polished as directed by Engineer-in-Charge.All fittings will be stainless steel (SS-304),SILICON beadings to be provided at the Top/Bottom rail and hanging/meeting styles complete all as specified & directed.

Taking down existing water proofing membrance and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified & directed.

M&L for rendering 15 mm thick surface as in roof with integral water proofing compound 3% by the weight of cement in cement mortar 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately).

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for water proofing treatment to roof surface complete all as specified & directed with the followings :- (a) Apply bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane

Supply only integral water proofing compound ISS marked all as specified and directed.

M&L for preparation of old distempered surfaces of wall including cornices etc and applying one coat of acrylic distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of wood and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted surface of steel or iron work over 10cm in width or girth of any description and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparing old plastered surfaces of wall and apply one coat of weather proof exterior emultion (APEX of Asian paint or equivalent) Complete all as specified and directed.

M&L for preparation of old treated surfaces of wall by complete removing of existing treatment and applying two coat of oil bound distemper over a coat of wall putty and primer complete all as specified and directed

M&L for preparation of old treated surfaces of wall by complete removing of existing treatment and applying two coat of Cement base paint complete all as specified and directed

Taking down cement plastering on brick or stone masonry wall of any description including racking out joints, backing for key scrubbing down with water etc complete all as specified & directed.

Rendering 15mm thick in CM 1:6 to brick work or concrete surface finished even and smooth with out using extra cement complete all as specified & directed.

M&L for 15mm thick plastering on fair faces of brick work or concrete surfaces in two layers with 10mm thick in CM 1:6 and top 5mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finishing the surface even and smooth without using extra cement complete all as specified & directed.

Demolition of brick work / stone boulder masonry built in cement mortar complete all as specified & directed.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar complete all as specified & directed.

ABC CONSTRUCTION COMPANY

R J ENTERPRISES

DHABALESWAR ENGINEERING WORKS

M/s MAA BHAIRABI ENTERPRISES

M/s Bapujee Builders and Traders

M/s J. P. ASSOCIATES

Likitha Enterprises