Construction of Sub-div office of Bowenpally and Ferozguda Section Office

Dismantling of Brick work including stacking of serviceable materials and disposal of unserviceable materials with 100 metres lead including all operational, incidental, labour charges etc. complete for finished item of work

Dismantle-Old Impervious Coat 20mm etc.,

Carting away of dismantled materials Complete for finished item of work as directed by the Engineer in charge of the work.

Earth Work Mass Excavation to a depth as directed, in soils such as Mixture of Gravel and Soft Disintegrated Rock like Shales, Ordinary Gravel, Stoney Earth and Earth Mixed with Fair Sized Boulders and in all conditions such as dry, wet, slurry etc.and i

Laying Plain C.C (1:4:8) using 40 mm HBG metal including cost & conveyance of all materials labour charges,curing,all leads lifts etc., complete for finished item of work.

Reinforced Cement concerete M20 GRADE Nominal Mix for footings , columns, Beams and Slab using 12mm to 20mm size graded HBG machine crushed metal from approvaed quary giving cube crushing strenth of 20 N /sqmm and a minimum of 400 kgs of cement for 1 cum of concrete including cost and conveyance charges for cement and all other materials to site, scaffolding charge , seignorage charges, centering, shuttering, machine mixing,laying concrete, curing for specified number of days vibrating etc compaction by pen vibrator or needle vibrator supplemented by hand spreeding rodding and tamping ,all incident and operational charges , all leads and lifts and for all leaving gaps and pockets etc complete, but excuding cost of ssteel and its fabrication,all incidental charges etc .complete for finshed item of work. First Floor - Column

Reinforced Cement concerete M20 GRADE Nominal Mix for footings , columns, Beams and Slab using 12mm to 20mm size graded HBG machine crushed metal from approvaed quary giving cube crushing strenth of 20 N /sqmm and a minimum of 400 kgs of cement for 1 cum of concrete including cost and conveyance charges for cement and all other materials to site, scaffolding charge , seignorage charges, centering, shuttering, machine mixing,laying concrete, curing for specified number of days vibrating etc compaction by pen vibrator or needle vibrator supplemented by hand spreeding rodding and tamping ,all incident and operational charges , all leads and lifts and for all leaving gaps and pockets etc complete, but excuding cost of ssteel and its fabrication,all incidental charges etc .complete for finshed item of work. First Floor - Roof Beam

Reinforced Cement concerete M20 GRADE Nominal Mix for footings , columns, Beams and Slab using 12mm to 20mm size graded HBG machine crushed metal from approvaed quary giving cube crushing strenth of 20 N /sqmm and a minimum of 400 kgs of cement for 1 cum of concrete including cost and conveyance charges for cement and all other materials to site, scaffolding charge , seignorage charges, centering, shuttering, machine mixing,laying concrete, curing for specified number of days vibrating etc compaction by pen vibrator or needle vibrator supplemented by hand spreeding rodding and tamping ,all incident and operational charges , all leads and lifts and for all leaving gaps and pockets etc complete, but excuding cost of ssteel and its fabrication,all incidental charges etc .complete for finshed item of work. First Floor - Lintel

Reinforced Cement concerete M20 GRADE Nominal Mix for footings , columns, Beams and Slab using 12mm to 20mm size graded HBG machine crushed metal from approvaed quary giving cube crushing strenth of 20 N /sqmm and a minimum of 400 kgs of cement for 1 cum of concrete including cost and conveyance charges for cement and all other materials to site, scaffolding charge , seignorage charges, centering, shuttering, machine mixing,laying concrete, curing for specified number of days vibrating etc compaction by pen vibrator or needle vibrator supplemented by hand spreeding rodding and tamping ,all incident and operational charges , all leads and lifts and for all leaving gaps and pockets etc complete, but excuding cost of ssteel and its fabrication,all incidental charges etc .complete for finshed item of work. First Floor - Roof Slab

Brick masonry in cement mortar (1:6) for superstructure using well burnt country made second class bricks of approved quality including cost and conveyance of all materials curing, scaffolding with all leads and lifts etc., complete for finish - First Floor

Brick masonry in cement mortar (1:6) for superstructure using well burnt country made second class bricks of approved quality including cost and conveyance of all materials curing, scaffolding with all leads and lifts etc., complete for finish - Second Floor

Reinforced Brick Masonary walls of 11.5cm in CM (1:6) using 2nd bricks having a crushing strength of not less than 35.00Kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including - First Floor

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to

Plastering of 20mm thick to all uneven faces of walls of superstructure in two coats with base coat in CM 1:5 of 16mm thick and top coat in CM 1:3 4mm thick with dubara sponge finish including cost and conveyance of all materials, water, all labour - First Floor

Plastering of 20mm thick to all uneven faces of walls of superstructure in two coats with base coat in CM 1:5 of 16mm thick and top coat in CM 1:3 4mm thick with dubara sponge finish including cost and conveyance of all materials, water, all labour - Second Floor

RCM facia 4cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcemet as directed by Engineer-in-change with dubara sponge finishing, including cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift changes etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903). First Floor

RCM rack 25mm thick in CM (1:3) with rabbit wire mesh & nominal reinforcemet as directed by Engineer-in-change including cost & conveyance of all materials to site, sales & incidental, cost and conveyance of cement, wire mesh, water t

Providng impervious coat to exposed RCC roof slab surface with CM(1:3), 20 mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials. - First Floor

Supply and fixing in position of doors with MT Wood Frame with Flush Door Shutter 35mm thick with 9 mm laminate of approved quality and design and fitted with teak wood lippings around duly polished/synthetic enamil paint including all

S&F-WPC Door Shutter 24/26mm thick

S&F-WPC Frame 100x65mm along with screw

S&F Powder Coated Al Window

Supply and fixing of ms grills of approved design including two coats of synthetic paint over a coat of primer including cost and conveyance of all materials ,labour cahrges etc. complete for the finished item of work

Flooring with cermic tiles of set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & jointed neatly with white cement paste to fu

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tile length equal to floor tile, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed w

Flooring with vitrified tiles 600x600 of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & jointed with neat c

Providing skirting to internal walls to 15cm height/risers of steps with vitrified tiles length equal to floor tiles, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30

Flooring with polished shahabad stones 15 to 18mm thick set over base coat of CM (1:8) over already laid CC bed /RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & jointed with neat cement to full depth inclu

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs

Painting to walls with 2 coats of plastic emulsion paint of interior grade of approved brand and shade over a base coat of appropriate primer of approved brand, to give an even shade after thourughly brushing the surface to remove all dirt and remains of

Painting to new walls with 2 coat of plastic emulsion paint of approved brand and shade over a coat of primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials - First Floor

Painting to new walls with 2 coat of plastic emulsion paint of approved brand and shade over a coat of primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials - Second Floor

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all

Seigniorage Charges - Sand

Seigniorage Charges for M-Sand

Seigniorage Charges - Metal

Supply and fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromiun plated metallic base saddles including all labour charges etc.complete for run of mains.

Supply and fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) Concealed in wall with all required accessories including masonary work and labour charges etc.complete.

Wiring with 2 runs of 14/0.3mm (1.0 sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A Modular Switch,ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for

Wiring with 2 runs of 14/0.3mm (1.0 sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A Modular Switch,control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete

Supply and run of 2 of 14/0.3mm (1.0sq.mm) (FR) P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges complete.

Supply and run of 2 of 36/0.3mm (2.5 sq.mm) (FR) P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges complete.

Supply and run of 2 of 56/0.3mm (4sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges complete.

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circuit Breaker(ELCB)/Residual Current Circute Braker(RCCB)/Double Pole(DP) Isolator as incomer and 10kA SP MCBs as out going including internal connect

S&F of 20 watts LED tube batten light set in including cost convenance Makes : Phillips / Crompton / Bajaj / Surya / Havells / HPL / Halonix

Supply and fixing of batten holder /slanting holder in lieu of ceiling rose of light point complete with all connection and all labour charges with 40W bulb (for new installation)

Supply and Fixing of 1200mm (48'') sweep 230v,A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standared accessories including all operational, incidental and labour charges etc. complete for the finished item of worK

Supply and erecting Electronic Regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board including all operational, incidental and labour charges etc. complete for the finished item of worK

Providing independent EARTHING by excavating a trench to a depth of 2.1M in all solid,as per size specified in the Data,using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes inclu

Supply and run of No.8 SWG Copper wire including cost of all accessories and labour charges etc., Complete

Supply & Fixing of 12" Light duty exhaust fan with metal blades etc including all operational, incidental and labour charges etc. complete for the finished item of worK Makes : Crompton / Havells Ventilair-DB / Orient hill air.

Supply & Fixing of 12" heavy duty exhaust fan with metal blades etc including all operational, incidental and labour charges etc. complete for the finished item of worK Makes : Crompton / Havells Ventilair-DB / Orient hill air.

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential - 22.20mm OD CPVC Pipe -SDR 11

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential - 28.60mm OD CPVC Pipe -SDR 11

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type -20 mm NB Size including all operational, incidental and labour charges etc. complete for the finished item of work

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type -25 mm NB Size including all operational, incidental and labour charges etc. complete for the finished item of work

Supply and Fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar or any ISI Brand including all operational, incidental and labour charges etc. complete for the finished item of work

S&F of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work

S&F of 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work

S&F of Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work

S&F of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work

Supply and Fixing of 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar or any ISI Brand including all operational, incidental and labour charges etc. complete for the finished item of work

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials t

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap including all operational, incidental and labour charges etc. complete for the finished item of

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including all operational, incidental and labour charges etc. complete for the finished item of work

Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Dual Flush including all operational, incidental and labour charges etc. complete for the finished item of work

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-197

S&F-15mm Angle Stop Valve Qtr turn including all charges for the finished item of work.

S&F-15mm Bib Tap 400gm Full turn including all charges for the finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but with NECES

S & F 38.1 mm C.P waste coupling Half or Full Thread 1st Quality Indian make Parryware or equivalent including all operational, incidental and labour charges etc. complete for the finished item of work

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including all operational, incidental and labour charges etc. complete for the finished item of work

Supplying & Fixing 15 mm nominal sizePVC connection with brass union nut C.P coated including all operational, incidental and labour charges etc. complete for the finished item of work

Supply & Fixing Chromium Plated Finish Health faucet of make: Parryware/Hindware or its equivalent including all operational, incidental and labour charges etc. complete for the finished item of work

S&F of 15 mm brass body Premium variety Chromium plated finish single lever pillar cock with aerator of not less than 500 grams weight quarter turn spindle conforming to IS 8931 including all operational, incidental and labour charges etc. complete for th

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including all operational, incidental and labour charges etc. complete for the finished item of work

S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets including all operational, incidental and labour charges etc. complete for the finished item of work

Supply and fixing of 8 Port switches of D link / AMP / Krone / Legrand make including all operational, incidental and labour charges etc. complete for the finished item of work

Supply of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone.

Supply & Fixing of 7 feet length moulded patch cord of makes D Link / AMP / Molex / Legrand / Krone including all operational, incidental and labour charges etc. complete for the finished item of work

Supply and laying of LAN Cable cat - 6 UTP cable of Make: D Link / AMP / Molex / Legrand / Krone.

S7F-4u Network Rack

LAN System Activation Charges

Supply of Table with top made from 25mm thick IS 12823 Plain Particle Board Post-formed with colour laminate on top side and backup laminate on bottom side. All other panels made with 18mm thick IS 12823 Pre-laminated Particle board with all exposed edges

Table with top made from 25mm thick IS 12823 Plain Particle Board Post-formed with colour laminate on top side and backup laminate on bottom side. All other panels made with 18mm thick IS 12823 Pre-laminated Particle board with all exposed edges duly edge

Supply of "Astro" Medium Mesh Back Adaptable, two way Adjustable arms, I synchromechanism, head rest, gas lift MODEL No. ASTRO - MBGS-B-HR.including all operational, incidental, conveyance and labour charges etc. complete for the finished item of work

Providing of Executive Medium Back Chairs with cushioned seat and knitted back having adjustable PU arm rest with nylon castors, back tilting option, lift synchro mechanissim includes cost of material, labour, transportation and placing in postion as des

Supply of PVC chairs of neelkamal make including cost and conveyance of all materials etc. complete for finished item of work as directed by engineer in charge

S&F-Star Flex with Iron Frame

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including all operational, incidental and labour charg

Supplying and fixing Roller Blinds with all accessories of approved colour and make including cost of all materials, Labour & Taxes etc., for finished item of work as approved by the Engineer incharge.

S&F of Mild Steel Tubes&Pipes of all diameters including fabrication & erection and painting all incidental, operational, labour charges such as cutting, bending, placing in position, excluding taxes complete for finished item of work.

Supply and erection of roofing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top):

Supply and fixing of aluminimum Partition fully panelled as per drawing using anodised aluminimum section of 62.5 x 44.45 x 3.18 mm thick fitted with 12.0 mm thick Particle Boards - Prelaminated fitted with suitable Aluminimum glazing clips and aproved

Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanised Steel section exposed surface with pre-coa