Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.3 Cr
EMD Value
₹1.9 L
Closing Date
16 Dec 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Electricity Supply Company Limited
Executive Engineer civil braz
Construction of o & M & I & II section office building duly dismantling the existing BESCOM section office at Srinivasapura, Kolar
BESCOM/2024-25/BD/WORK_INDENT254
BESCOM/2024-25/BD/WORK_INDENT254
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Bangalore Rural Area Zone(BRAZ) Office Bengaluru
8 documents required · 8 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidders shall upload the work done certificate for having executed One RCC Framed structured building or similar nature of work of value not less than Rs. 63.60 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years. Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent. (Note: Work done amount will be updated to the FY 2024-25 in which the tenders are invited. The value of the completed works will be given a weight of 10% per year to bring them to the price level of the FY 2024-25 in which the tenders are invited)
The bidders shall upload the work done certificate for minimum quantities of work executed in any one year, for following quantities (In a continuous period of 12 months) in the last 5 years the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent. a. Earthwork Excavation-675Cum, b. PCC/RCC -284.00 Cum, c. Burnt Brick Masonry/ Solid Block Masonry -462.00 Cum/93Sqm, d. TMT steel reinforcement -20.00 Tonnes, e. Vitrified / Ceramic / Granite flooring -381.00 Sqm
The bidder/tenderer or his identified Sub contractor should produce required valid electrical licence along with consent/undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs. 3.16 lakhs in any one year in the past 5 years signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works.
The bidders shall achieved turnover for an amount not less than Rs.254.14 lakhs achieved in any two financial years in the past 5 years (i.e. F/Y 2019-20 to 2023-24) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e. F/Y 2019-20 to 2023-24) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will considered Non-Responsive) should be uploaded. (Note: The turnover amount will be updated to the FY 2024-25 in which the tenders are invited. The Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2024-25 in which the tenders are invited).
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.38.20 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to Chief Engineer (Ele), BRAZ, BESCOM after 26.11.2024 in the enclosed format with following details 1)Cash at Bank 2)Term deposits 3) a) Credit facility sanctioned, b)Credit Utilized, c)Balance credit facility available.
Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 500/- duly notarized stating that a. Not made any misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements. b. Not made any Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion or financial failures etc. c.Not participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. d. No Litigation History or arbitration arising out of contracts completed or under execution by it over the preceding five years.
₹3,180
₹1.9 L
1 Dec 2024
1 Dec 2024
17 Dec 2024
12 Dec 2024
6 Dec 2024
Construction of o & M & I & II section office building duly dismantling the existing BESCOM section office at Srinivasapura, Kolar
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc.in layers Nost exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine a...
Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The gr...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800Kg/Cum and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800Kg/Cum and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800Kg/Cum and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800Kg/Cum and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and constructing 75mm thick jaali wall using 200x200x75mm clay jaali with cement mortar 1:3 with 12mm deep recessed pointing with CM 1:3 after raking joints to depth of 12mm nicely lining,in...
Providing and fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats, square or round bars etc.including priming coat with approved steel primer all complete.Fixed to openings /...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened moNoslithic float glass of approved colour and shade with reflective soft coating on surface No 2 of approved c...
FULLY GLAZED PARTITION WITH TOUGHENED GLASS & ALUMINIUM CHANNELS
Providing and fixing full height glass partition with 12mm thick clear toughened glass as per design fitted over aluminium channels bot...
Providing and fixing Single shutter glass door of 12mm thick frosted toughened glass of approved make.The door is fixed by using any approved make hardware fitting like patch fitting, pivot floor mach...
Gypsum partiition
Providing and fixing partition upto ceiling height consisting of G.I.frame and required board, including providing and fixing of frame work made of special section power pressed/ ro...
Cavity wall insulation with Rock Wool Slab (50mm)
Providing and fixing rock wool slab 50mm thick resin bonded rock wool slab having density 36+/-5 Kg/Cum for insulation of cavity wall with including n...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing SS 304 Aldrop-250mm x 16mm (variation in size acceptable upto + / - 10%) suitable for door shutters including SS screws cost of materials, labour etc., complete as per specificati...
Providing and fixing bright finished brass handles with screws etc.complete:
Brass handles 125 mm with plate 175x32 mm
a) Ground Floor
Providing and fixing bright finished brass handles with screws etc.complete:
Brass handles 125 mm with plate 175x32 mm
b) Terrace Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc.to suit shutter thickness complete
a) Ground Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc.to suit shutter thickness complete
b) Terrace Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc.complete :
25x85x5.5 mm (heavy type)
a) Ground Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc.complete :
25x85x5.5 mm (heavy type)
b) Terrace Floor
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.complete :
a) Ground Floor
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.complete :
b) Terrace Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
Providing supply and fixing MS Holdfast of size 260mm x 25mm x 5mm thk for fixing door frame to walls including cost of materials, cutting masonry pockets for receiving MS Holdfast, one coat of shop p...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge.
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), includi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed, including cos...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Finishing works
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, pro...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of Nosminal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 Kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 Kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge bomd...
MEDIUM BACK CHAIR
Supplying Black Medium Back Mesh chair of size 585mm(L)x585mm(W)x1040mm(H) with cushion seat and mesh back with cushion arms and nylon base with Pnuematic height adjustable system w...
EXECUTIVE CHAIR
Supplying Liberate High Back Mesh chair of size 660mm(L)x660mm(W)x1250mm(H) with cushion seat and mesh back with cushion arms and chrome plated metal base with Pnuematic height adjust...
Mobile pedestal unit- WOODEN
Providing and fixing 450mmw X 450 mmd X 685 mmht) Mobile pedestal unit - WOODEN with 18mm thick PLPB with edge bonded for body, Two equal drawer and one filing drawer with...
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, ...
LandscapiNg Works
A.SCRAPPING AND REMOVING TOP SOIL:-Scrapping the are by removing 0.15m soil and removing of unwanted plants, grass along with roots.25km initial transport,including lead, lift loadin...
1st- DIGGING:-Digging of the area for developing lawn including removing weeds,debris if any and breaking of clumps, watering etc.(1x1x0.45mt).
2nd- DIGGING:-Digging of soil by removing grass et cif a...
Procurement of quality lawn grass
Korean Grass Tur
Lawn development cost of Korean Grass Turf
Labour Charges mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging, levelling, and dibbling with lawn grass at a spacing of 5cm x5cm & as per the direc...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour,...
Food Graded Water Proofing Membrane
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofin...
PVC CONDUITS & ITS ACCESSORIES
Concealed conduit System
Supplying heavy guage PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, ad...
Concealed conduit System
Supplying heavy guage PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running...
Concealed conduit System
Supplying heavy guage PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running...
Supplying heavy guage PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ce...
Supplying heavy guage PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ce...
Supplying heavy guage PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ce...
Supplying and fixing PVC/metal conduit deep junction box.
a) 19/20mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
b) 25mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
c) 32mm deep junction box
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete.
a) upto 50mm conduit in CC Floor
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete.
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi ...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi ...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi ...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi ...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
SWITCHES, SOCKETS & ACCESSORIES
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cu...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6 Amps one way switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6 Amps Two way switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6Amps 3way socket.
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
Stepped fan regulator
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
16Amps one way switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
32Amps DP switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
6/16Amps universal socket
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
TV/Telephone socket
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
RJ45 / I.O outlet Cat-6
CONTROL SWITCH GEARS & ACCESSORIES-Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross...
CONTROL SWITCH GEARS & ACCESSORIES-Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross...
CONTROL SWITCH GEARS & ACCESSORIES-Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCBS single phase / ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCBS single phase / ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCBS single phase / ...
Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.
a) 32-40Amps 4 pole
Supplying fixing and wiring earth electrode for grounding of DG Sets etc using 40mm dia 2.9mm thick 2.5M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required-GI STRIPS - 25x3MM
Supplying & Installation of 1.1KV LT UG cable XLPE or heat resistant PVC insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thi...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
a) 2.5 sqmm to 25 sqmm
CIVIL WORKS RELATED TO ELECTRICAL WORKS
Digging of trench of 0.6m deep x 0.50 M wide refilling the trench to the required ground level and consolidating etc…complete.(As per civil SR KSRB I-2, P-7)
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
Supplying and laying double walled corrugated (DWC) HDPE pipe including all necessary connecting sockets/couplings/tees/bends/end caps of same materials in existing trench as per IS 14930 part-ii suit...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...
Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary l...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
LUMINAIRS / LIGHT FIXTURES & ACCESSORIES
Suppy of 15W LED bulk head fitting with guard, Acryilic glass and suitable driver.
Supplying of 2 feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8.Power Input : 220-240V @ 50 Hz &...
Supplying of 2 feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8.Power Input : 220-240V @ 50 Hz & power fact...
Supplying of recess mounting Nosn integrated type LED down light …W luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, LED of Power / COB wi...
Supplying of recess mounting Nosn integrated type LED down light …W luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, LED of Power / COB wi...
Supply of 2X2 LED recessed / surface luminaire with watts system wattage.Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester powder coated.Driver operates w...
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation.Diffuser with injection moulded & is made of polycarbonate material with h...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc….Complete ...
Supplying, erecting, testing and commisioning of OFF-LINE UPS System suitable for operation on 230V Input and 230V, Output, 50Hz, A/C supply with all accessories complete and excluding batteries and w...
Supplying, installation, testing & commissioning of 12volts DC AH Batteries in poly propylene container for UPS Sealed maintainence free batteries.
12V, 75-80 AH Capacity.Acid battery.
CAMERAS & ACCESSORIES
Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, 2.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WDR (Wid...
Supply, Installation, Testing & Commissioning of 8port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing & Commissioning of NVR (Networkable Video Recorder) -4Channel NVR, Up to 8ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up to 1920x...
Supply, Installation, Testing & Commissioning of HDMI, Display Monitor 24" high resolution, Monitor with all mounting bracket accessories.
Supplying and drawing UTP-CAT 6 LAN cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.
Supplying fixing of Network Switches.
16 port 10 / 100 / 1000 switch
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.
Providing and fixing wash basin with C.I.brackets, 15 mm C.P.brass pillar taps, 32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wall...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...
Providing and fixing CP.Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete...
Providing and fixing C.P.brass bib cock of approved quality conforming
Providing and fixing C.P.brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete...
Supplying, shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P.brass flush pipe, spreaders wit...
Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C.waste fittings complete.
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..
Supplying and fixing PVC P trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.
Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.
Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes, including condcting water ponding test to ensure zero leakage with all l...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm Nosminal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25mm Nosminal bore
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm Nosminal bore
Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :
25mm Nosminal bore
Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :
32mm Nosminal bore
Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :
40mm Nosminal bore
Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :
50mm Nosminal bore
Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flo...
Supplying & fixing suction Y/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots.50 mm dia
Supplying, fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet,...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing And fixing Square mouth stone ware gully trap SP-1 Complete With CI Grating Brick Masonry Chamber 100x100mm Size P trap With Nosn modular common burnt bricks of designation 3.5, with water t...
Constructing brick masonry chamber for underground C.I.inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal di...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
DOMESTIC WATER TRANSFAR PUMP
Supplying, installing, testing and commissioning of submersible / MoNos blockelectrical driven pump 1set.(1 working & standby) domestic water pumps for pumping domestic wa...
Providing and fixing gun metal Nosn- return valve of approved quality
32 mm Nosminal bore
Providing and fixing gun metal Nosn- return valve of approved quality
40 mm Nosminal bore
Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in...
Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs ...
Supply and fixing 600mm long puddle flange consisting of 6mm thick welded MS plate, flanges of sutible size property fixed in walls of water tanks as per specifications and approved drawings of follow...
Supply and fixing 600mm long puddle flange consisting of 6mm thick welded MS plate, flanges of sutible size property fixed in walls of water tanks as per specifications and approved drawings of follow...
Supply and fixing 600mm long puddle flange consisting of 6mm thick welded MS plate, flanges of sutible size property fixed in walls of water tanks as per specifications and approved drawings of follow...
Dismantling of existing BESCOM Buildings such as Quarters, office buildings, etc;the works include dismantling of Size stone masonry, Brick/Block Masonry, PCC, RCC Works and disposal of debris at suit...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW4 final Srinivasapura.docx
Tender Document • 0.55 MB
Banker Certificate Format.jpg
Others - Banker Certificate • 0.46 MB
Self declaration format (1).docx
Others - Self Declaration Format • 0.02 MB
NIT Srinivasapura.docx
Instructions to Tenderers • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .