PROVIDING INTEGRATED INFRASTRUCTURE FACILITIES

Amount

Earthwork excavation in sand silt or other loose soil wet sand or silt, light black cotton, sandy loam soil and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metre and lifts as specified hereunder(including refilling)etc., all complete in all respects complying with relevant standard specification. ( narrow cutting )

0 to 2 m depth

2 to 3m depth

3 to4m depth

4 to 5m depth

5 to 6m depth

Earth work open excavation in all soils and subsoils to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. Within compound in places shown by the department officers and cleaning and levelling the site, etc, complete complying with standard specifiations.

0 to 2 m depth

2 to 3m depth

Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Providing and laying crushed stone sand gravel mix (1:1) at the rate of 0.62 cu.m of filling crushed stone sand and 0.66 cu .m of gravel to consolidated 1hide of 150mm designed to attain a CBR value of not less than 20 including cost and conveyance of crushed stone sandgravel from approved sources to work site and stacking them to the departmental gauge for premeasurement including labour charges labour charges for power roller watering and all other tools and plants employed including all other incidental charges etc., complete (For road works)

Supplying and filling in foundation and basement with Gravel Filling in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand as directed by the Departmental officers.

Supplying and filling in foundation and basement with filling crushed stone sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand as directed by the Departmental officers.

Sand Filling for Footing, Plinth beam, Mat flooring, Basement level & other requirements.

Lime concrete 1:4:8 (One of Lime four of M-sand and eight of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete as per Std, Specification and as directed by the Dept, Officers

Cement concrete 1:5:10 ( One of cement, five of crushed stone sand and ten of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. plinth protection

Reinforced Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. Toilet Vanitary Counter

Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 425 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials).

For Basement

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

for footing-Base Slab to Plinth beam level

For Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

fifth Floor

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

fifth Floor

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

fifth Floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) for footing-Base Slab

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)For plane surfaces such as floor slab,roof slab,beam,lintel,bed blocks and landing slab, waist slab,portico slab beam etc

Roof Beam & Slab

For Raft beam, Roof Beam, lintel

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) For plane surfaces such as floor slab,roof slab,beam,lintel,bed blocks and landing slab, waist slab,portico slab beam etc

kodungai

for RCC wall & RCC Drops

Additional strutting above 3.3m floor height

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing,etc.

for Column

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

a) for footing-Base Slab, PLINTH Beam, Column, Roof Beam, Roof Slab, Water tank RCC wall, Rcc Drop, Lintel, Sill & Staircase

Post Tensioning Work: Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting,packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.

Supply of new stone for carrying out Rajagopuram kalkaram walls, and flooring including cost and conveyence etc.,all complete.

Dressing and fixing charges for new stones on rajagopuram Kalkaram, including labour and all complete.

Thoon

Dhindu course

Upanam/ Kandam pattial

Upapeedam Padma Jagathi

Upapeedam Sthambam

Vedhikai/ Padma jagathi

Ulvarai - Innerwall

Pristhram- Uthiram/ Kambu/ Eluthangam

Kabotha Vari

Viyazhavari

Thoon

Jalaram

Karnakoodu

Nasi thalai

Sakthi Sirpam

Labour Charges for pointing the cut stone masonray work with lime motar 1:1.5 (one part of lime and one point five part of sand) excluding cost of cut stone but including all labour charges, scaffolding etc.. Complete with standard specification

Brick work in cement mortor for the following using chamber burnt Second class ground moulded bricks of size 9" x 4-3/8"x2-3/4" having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings..

Foundation & Basement CM 1:5

For Ground Floor CM 1:6

Ornamental Brick masonary CM1:4 using Stock bricks including all varivargams, mould sthambams mokopathrams, koodu, Nasi and all ornamental brick work complete, all pancharams Agarais, Karanakoodu, etc., forming core walls of Rajagopuram / Vimanam complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for Kalkaram . For Ground Floor

Autoclaved Cellular Aerated Concrete Block with Self curing joint mortar including cost of AAC Block of Size 600x200x200MM for super structure and adjacent to the structural members bonded with CM 1:5 with a tickness of 10mm in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings..

Foundation & Basement

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

fifth Floor

Autoclaved Cellular Aerated Concrete Block with Self curing joint mortar including cost of AAC Block of Size 600x200x100MM for super structure and adjacent to the structural members bonded with CM 1:5 with a tickness of 10mm in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings.

Foundation & Basement

Ground Floor

First Floor

Second Floor

Third Floor

fourth Floor

Damp proof course with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three of plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Ceilling Plastering ( all Floor)

Plastering with cement mortar 1:5 (One of cement and five of plastering sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer

Internal Plastering (all Floor)

Plastering with cement mortar 1:5 (One of cement and five of plastering sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer

12 MM External Plastering (all Floor)

Painting with multicolour (Panchavarnam) good Emulsion paints complete for the Vinamans/Gopurams, inculding cost and conveyence of all materials, labour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Up to 15' excluding Kalkaram - Kodungai exterior & columns & ceiling plastering

Up to 25' excluding Kalkaram - Kodungai exterior & columns

Up to 50' excluding Kalkaram - Kodungai exterior & columns

Providing plasrtering Cement mortar band in CM 1:3, 12 mm thick for elevation Band etc., including, cutting, bordering, edge finishing. For all size Bands - FROM 15 up to 50

Providing Vargapoochu over the slabs of Kodungai, with Cement Mortor 1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embdding broken bricks of shaped/chiselled bricks, rough-plastering with C.M. 1:4 and finishing withfinal ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete inculding all axtra for folding and inculuding clearing from the vimanams/gopurams 100sft superficial area. for kalkaram. - (Vargapoochu & Nayamtheervai only)

Kalkaram

Vargapoochu for Kodungai slab - up to 15' Height

Vargapoochu for Kodungai slab - up to 25' Height

Vargapoochu for Kodungai slab- up to 50' Height

Vargapoochu for Kodungai slab- up to 50' Height and above

Ornamental Brick masonary in Cement Mortar 1:4 using ground moulded chamber burnt Stock bricks including all varivargams, mould sthambams mokopathrams, koodu, Nasi and all ornamental brick work complete, all pancharams Agarais, Karanakoodu, etc., forming core walls of Vimanam complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for Kalkaram .

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in cement mortar 1:2 (one part of cement and two part of sand) finishing the same with cement mortar 1:2 (one part of cement and two part of sand) bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder)

Supplying and Paving the flooring with best quality M30 Rubber Moulded Machine pressed Paver Block with 63 MM thickness of approved colour,shade and laid over well compacted sand surface, etc.,complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best approved quality flammed Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Supplying and fixing of super fine polished (RED OR GREY/basic colour) Granite slab of 18 mm to 20 mm thick of approved quality laid in CM 1;3 (one of cement and three of sand) 20mm thick over including cutting the granite slab to the required size where ever necessary , nosing the edges to the required shape including cost of granite slab, polishing laying finishing etc all complete in all respects and as directed by the departmental offficers. (Measurement will be taken including bearing also. The quality and color of Granite slab shall be got approved by the Competant Authority before fixing.) in all Floors and vanity counters

Supplying and fixing in position of colour glazed wall tiles for Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm thickness laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing / dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:(The colour make and quality shall be approved from the Competant Authority before use) In all Floors

Supplying and fixing in position of matt finish Colour Double charged Vitrified Floor tiles of 600 X 600 MM x 8 MM of approved special quality of 08 mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers.(Double charged tile)

Supplying and flooring with following joint free rectified ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) In all Floors

Supplying and fixing of super fine polished Granite slab of 1200x600x18/20mm 10 to12 mm thick of approved quality laid in CM 1;3 (one of cement and three of sand) 12 mm thick for side walls including cutting the granite slab to the required size where ever necessary , nosing the edges to the required shape including cost of granite slab, polishing laying finishing etc all complete in all respects and as directed by the departmental offficers. (Measurement will be taken including bearing also The quality and color of Granite slab shall be got approved by the Competant Authority before fixing.)

RED/GREY/ BASIC COLOUR - GRANITE WALL FINISHES - 2400mm high ( in all floor)

GROOVES IN GRANITE(TNPWD SR - M0247)

Single nosing in granite slab at stairs,sill slabs,vanity counters,etc (TNPWD SR - M0245)

Double nosing in granite slab at stairs,sill slabs,vanity counters,etc(TNPWD SR - M0246)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supply and fixing the top of roof slab with one course of Fixing Prefinished Solar Radiation Reflective Roofing Tiles (300mmX 300 mmX20mm) with SRI (SOLAR REFRACTIVE INDEX > 85. SOLAR REFLECTION > 0.73 AND INITIAL Emittance > 0.85 as per the BEE standard on top of waterproofing system, laid to the uniform gap of 5-6mm between each tile on 20mm thick cement base mortar in the ratio 1:4 (1 cement: 4m-sand) with thick cement slurry coat and grouting the joints with Grout-Non shrink, free flow Non metallic tile joint grout by adding 15-20% water to form a smooth paste which should be applied to the joints, preferably with a rubber squeeze, allowing grouted material to dry max 30 min.Once the grout has hardened, the tiles will be left with a slight haze on them. Clean it up by going over the area lightly with a damp cloth, then buff immediately with a dry cloth, including providing skirting up to 114mm height along the parapet walls in the same manner @ 45 degree angle etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. in all Floors

Finishing the top of roof slab with one course of Machine pressed tile of approved superior quality of any size (230x230)20mm thick laid over weathering course in cement mortar 1:3 ( One of cement and three of sand) 12mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. (Note:Tiles to be got approved by the Competant Authority before use and only one particular size pressed tiles should be used for one type of building) in all Floors

Providing polymer coating (waterproof coating) for sunken portion of toilet and terrace floor with following specification on the surface shall be cleaned to remove all dust foreign metals loose materials or any of the deposits of contamination by rubbing with wire brush. Celebrity dry blend and the polymer liquid blend shall be mixed into a desired ratio as per the recommendation of the supplier. The mix shall be stored thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on both clean surface. After drying, second coat shall be applied on the first code as directed by the departmental officers etcetera. The rate inclusive of cost of materials and labels, etc complete. in all Floors

Supplying and fixing of Cut stone slabs of 600mm x 600mm thickness upto 10cm for flooring works including cost and conveyance of stone, loading and unloading charges , labour charges for 3 line dressing of required faces neatly finishing and fixing in posution with lime mortar 1:2, using lime which should be sourced, which is highly iron fortified and suitable for structural and masonry work, including cost and conveyance of smithy materials and tools, charcoal, mending charges and all other incidental charges etc complete at site .

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) Average 60mm thick.

Weathering course with broken brick jelly lime concrete using 20mm gauge broken brick jelly in pure slaked lime ( no sand) over roof slab to the proportion of brick jelly to lime ( Fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters, for giving the required slope and thickness complying with relevant standard specification and as directed by the departmental officers.

First floor

Toilet sunken area/Ground Floor

Fifth floor

Cement concrete 1:4:8 for foundation and flooring using 20 mm size broken stone Jelly inclusive of shoring, strutting, bailing out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers. For Plinth Protection

Providing and fixing of Aluminium composite panel (ACP) 4 sided having 50 x 20 x 1.50 mm framework vertical and horizontals out of specially designed extruded sections 180 kg/Sqm and fabricated fixed at all level elevation and height. The extruded strudent section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 conforming T section rate shall included to fix the main frame with necessary clamps fasteners bolt nuts etc.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels,spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors.Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

a) Suplying and Fixing of seamless 8 mm plain gypsum board ceilling including cost of material and Labours etc., complete in all respects and as directed by the departmental officers.Gypsum false Ceilling Finishes ( all Floor)

Cornice work for Gyp-board false ceiling

Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm,length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers.Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres.Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15.Finally, Item no. M-0622 Page 59 of SOR 23-24 the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm.

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm.

Supply and installation of Anutone (or) Equivalent Brand of wall panelling.with the GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 25mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre.Anutone (or) Equivalent Brand of strand, square edge, magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 10mm, density 400 kgs / m3, weight 8 kg /m2 are fastened to strut CC 50 cross channel with suitable fasteners. Longer edges of the panel should be perpendicular to strut CC 50 cross channel. Synth slim panels are then adhered to strand behind with stick S7 adhesive. The system is backlined with the acoustical infill SynthPF 500 gsm 50 thick. The systems to achieve noise reduction coefficient not less than 0.85 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying with standard specification.

Supply and installation of Anutone / Hera Design / Tectum / Equivalent Brand of Acoustical Fibre Based Wall Panelling of strand colour, kerfed edge magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 20mm, density 400 kgs / m3, weight 8 kg / m2 installed by using GI strut frame work system with non-visible fasteners usin PVC strut H-Spline. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. PVC strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 cross channel at 600mm centers. The kerfed edge panels shall be then inserted into the strut H-Spline along their long edges of 2400mm against frame work to perfect fit with staggered short edges. The system is back lined with the acoustical infill Anutone or Equivalent Brand of SynthPF 500 gsm 50mm thick. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying with standard specification

Supply of laying of Anutone (or) Equivalent Brand of Acoustical Insulation of Sound SynthSynk Polywool, 50mm thick made from recycled poly fibre and fully recyclable, surface density 1000 g / m2, weight 1.0 kg / m2 in form of rolls of 600mm wide and 15m in length, adhered to surface with stick S7 adhesive or held in position with chicken wire mesh etc., complying to standard specication.

Supplying and painting the walls with the two coats of wall putty as instructed by the department will offices including preparation of surface curing, etc., complete in all flows complying with the standard specifications (we got approved by the executive engineer before use of work.)

Painting the interior ceiling/ new walls with two coats of approved plastic emulsion paint over one coat of primer including cost of brushes emulsion paint and Labour Charges etc. all complete complying with relevant standard specification and as directed by the departmental officer. In all Floors

Painting the new walls with two coats of best approved quality weather proof water based exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Competant Authority before use). External Finishes in cluding rcc drops

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for working, inspection etc, complete hire charges only for erection, maintenance and removing the same on completion of the work1 sq,ft.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of zink chromate priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Special Plastering CM1:3 (One Cement and Three Sand) 12mmThick mixed with water Proof Compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. a) Toilet Floor and wall

Supplying and fixing in position of stainless steel hand rails with Balustarder for stair case with top hand railing pipe of 50-80 mm dia with 40mm vertical post at 1000mm interval to a height of 900 mm with horizontal support fabrication pipes of 38.30 mm dia - 2 line, pipe design with 12 mm dia pipe connecting two vertical and bottom horizontal pipes and fixing 100 mm dia ring with 12 mm dia base cup for every vertical post all stain less steel pipes are 1.60 mm thick pipe, 304G to be fixed and fabrication with gas tungsten arc welding, fixing with lock fix paste and cleaning with passivation paste to remove the welding film with fine polishing including drilling the tiles or granite including conveyance, loading unloading etc all complete complying with relevant standard specification and as directed by the departmental officers.(The quality of all the materials should be got approved before use on works) Staircase

Supplying and fixing in horizontal position of stainless steel hand rails using fabrication pipes of 38.30 mm dia - single line, pipe design with 25 mm dia pipe connecting in to side wall with gas tungsten arc welding, fixing with lock fix paste and cleaning with passivation paste to remove the welding film with fine polishing including drilling the tiles or granite including conveyance, loading unloading etc all complete complying with relevant standard specification and as directed by the departmental officers.(The quality of all the materials should be got approved before use on works) Staircase in all Floors

Supplying and fixing the following Terracotta Jally with a minimum size of 200x200x75MM laid or fixed with 10MM thick CM1:2 over the joints.The required size will be cut with special cutter machine whereever required and laying in position,pointing with colour/white cement with spcified colour pigments at the rate of 0.3Kg/Sq.M, proper curing,etc.,complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting of pull and push type manually operated Rolling Shutter of approved size and section using 18 guage G.I. Sheet confirming to ISI standard with Hood covers including one coat of approved primer transport charges etc. complete in all respects, complying with relevant standard specifications and Model/Brand of the Rolling shutter has to be got approved as directed by the departmental officers. Manually operated upto 8 sq.m Area

Supplying and erecting of pull and push type manually operated Rolling Shutter of approved size and section using 18 guage G.I. Sheet confirming to ISI standard with Hood covers including one coat of approved primer transport charges etc. complete in all respects, complying with relevant standard specifications and Model/Brand of the Rolling shutter has to be got approved as directed by the departmental officers. Gear operated From 8 sq.m to 12.0 Sq.m Area

Providing pre-constructional Anti termite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls. The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and spraying the same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers.

Supply & fixing Mild steel grill of approved. The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, laboir charges for fixing etc all complete ( 30 Kg/m2)

Expansion joint Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed

Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed

Providing expansion joint of 12.5mm in between RCC twin columns from top of pedestal to full height including filling the inner space with suitable non absorbant, flexible and well compressible fillere materials of approved quality and Brand, finishing the sides of RCC columns with polysulphide sealants for a edepth of 7.50 mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed by the departmental officers.

UPVC Window-Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Windows of sliding type from the profile the size of outer frame 80mm x 58mm and shutter profile are reinforcement with GI/1.5mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved before use on work directed by the departmental officers. Item no. M-0674 Page 70 of SOR 23-24 Windows above 25 Sq.ft And up to 72 Sq.ft - in all floors

UPVC Ventilator - Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved before use on work directed by the departmental officers.

Supplying & fixing in position best indian teak wood fully panelled two leaf door/ shutter with door frame for a door opening of size 1.80 Mx2.40 M. Door frames of size 150x100mm, Door shutter size 100x40mm top & bottom rail 150x40mm lock rail 200x40 mm five panels for each shutter, with Teak wood panels of 25 mm thickness, 30-45 cm width includes cost of holdfasts firttred with door frame and fixed wall in concrete M20 grade and includes furniture fittings such as Brass heavy duty butt hinges, Brass tower bolt - 300x12mm - 2nos, 100x12mm - 1 no. Brass heavy aldrop 300 x 16mm, Brass door stopper, 50mm rubber bush for shutter. Double leaf door

Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame corners of extruded outer size 75mm X 50mm the inner core more rigid WPC composite with minimum shore hardness of 55 and bulk density 0.8 Grams per cubic centimeters. The frame shall be fixed to the wall using 10 X 100 mm long MS screw through the frame through the pvc fastener. Minimum three numbers of screw to be provided for each vertical member. The overall size of frame shall be with suitable rebate for housing shutter and shutter consist of 25mm polymer composite board single core exhaust with one side embo printing design. To avoid duplicate from the printing design shall have logo of the WPC board shall be bount aid proved by kept official. The shutter shall be provided with 3 Nos of 4" SS butt hinges, 2 Nos of 4" Stainless Steel handles, 3 Nos of 6" Stainless Steel tower bolts with required Stainless Steel screws including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officers

FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers.

Manufacturing, supplying and fixing of steel doors with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sandwitching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m and 6 Nos hinges for double leaves shutter to be provided nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing., All members are given one coat of red oxide primer as directed by the departmental officers.A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers.The rate includes cost of all materials. labour charges, transportation, taxes and all other incidental charges, etc., complete.

Supply- fabrication- erection of “B” class MS medium pipe by using single section Truss of 75mm x 50mm x 2mm, by using 75mm x 50mm x 2mm for Purlins, by using 75mm x 50mm x 2mm for Support Runners along with necessary MS plates, cleats, bolts & nuts with good wielding. The M.S structure will be applied with one coat of zinc chromate primer and finished synthetic polimer paint. Supply – Laying – Fixing minimum of 10 mm thick clear multi wall polycarbonate sheet, with top aluminum section, EPDM rubber beading, silicon sealant, SDST system, labour etc. fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

RCC CORE CUTTING WORK - Making through holes in plain or RCC with diamand core drilling system by using Bosch power tools of following diameters - Depth per Centimeter

100mm Dia hole

125mm Dia hole

150mm Dia hole

200mm Dia hole

Initial load test as per ISD 2911 Part 4 1985 including cost of single pil(250% of pile capacity), labour, reinforcement charges and all other incidentqal cjharges invcluding excavation, shoring, strutting, dewatering, mobilisation of equipmrents, et.c., and also necessary hire charges for jacks, Measuring devices, structural frame work for platform, ket ridges etc., as required and providing pile cap for 600mm dia piles.

Routine load test as per IS 2915 Part 4 1995,(150% of poile capacity) including Mobilisation charges, Labour charges for jack, measuring devices, structural frame worlk platform, Kent ledges etc., as required and as directed by the departmental officers, ertc., complete for 600 mm dia piles.

Boring, providing an installating bored cast in situ peinforced cement concrete piles of 600 mm dia and length upto top of pile cap in M30 concrete, excluding the cost of reinforceement, & including the cost of boring with casing and bentonite solution and the length of pile to be embeded in the pile cap et., complete. (Length of pile for payment shall be measured top of shoe to the top of pile cap)

Water proof membrane system-Basement Positive Side Waterproofing Horizontal Surface Below Raft Slab Area (HDPE Membrane) Supplying and installing waterproofing treatment by using 1.2mm thick fully bonded Preapplied HDPE using Fosroc Membrane HDPE-P with a film of pressure sensitive adhesive and allows poured concrete to bond fully with the membrane on Raft Slab/Stitch Slab/footing/Grade slab as shown in drawing. The waterproofing membrane shall comply with BS 8102 - 2009 for grades 1, 2 and 3 and Indian Standard 16471 : 2017 for Protection of structures against water from the Ground.Waterproofing membrane shall be supplied with side overlaps of 75mm provided on the self adhesive selvedge and end laps using HDPE P Sealed tape of 100mm wide. Membrane shall be installed in strict accordance with the manufacturer’s instructions with and shall provide an intimate bond to resist water migration. The fully bonded HDPE membrane is loosely-laid on the PCC before casting of the RCC raft slab / Footings/Stitch Slab/as shown in drawings or wherever applicable etc. The membrane waterproofing shall taken to the height of grade slab concrete in aid of shuttering sheets or block work over and above lapping with Retaining wall waterproofing system The fully bonded Preapplied HDPE sheet waterproofing membrane shall have following typical properties : 1) Membrane thickness : 1.2mm 2) Bare HDPE film thickness : 0.9mm 3) Tensile strength (film) : >27 Mpa (ASTM D412) 4) Elongation >500% 5) Peel adhesion to concrete: > 1500N/m (ASTM D 903 Modified) 6) Puncture Resistance: >1000N + 5% (as per ASTM E154) 7) Resistance to hydrostatic pressure : >70m (ASTM D751-06) 8) Low temperature flexibility : <-25°C, no crack 9) Linear Dimensional change : 0.1% (ASTM D1204) 10) UV Exposure test 45 day : No change (ASTM G153) 11) Lap joint strength : 1500 N/m (ASTM D1876) The item rate shall include base preparation which include wire- brushing the Concrete/Masonry surface & cleaning with air jet , treating all joints, cracks, honeycombs on the RCC members as per manufactures specification and approved methodology.

Providing and applying Proofex 3000V of Fosroc Chemicals for retaining walls and other sub structure walls of UG Sump, STP, lift pit, etc at 1.5mm thick as per manufacturer specification. The concrete wall surface shall be made dry, clean, even and checked for soundness. Removal of oil, dirt, laitance and other contaminants by manually and surface shall be fairly smooth finish. Filling of tie rod holes if any using Conbextra Tie rod Grout mixed with water. Injection grouting of construction joints and honey combs with cementitious pressure grouting with 40 psi pump using Cebex 100 @ 225gms mixed to 50 kg bag of cement including joints packing using polymer modified mortar. chamfering the floor wall junctions with cement mortar 1:4 admixed with Nitobond SBR @ 2 litres per 50 kg bag of cement. Providing and applying Proofex 3000V, 1.5mm thick cold applied bituminous waterproofing membrane over the primed surface with solvent based bitumen primer Torchseal Primer M. The waterproofing membrane shall be self adhesive sheet membrane comprising of a polymer modified bitumen layer internally reinforced with polyester bonded to an outer surface of cross laminated HDPE carrier film. The waterproofing system shall be terminated one foot above the ground level and sealed with polymer modified mortar after taking the grooves of 10mm x 10mm. The waterproofing membrane shall have the following properties

Providing Polymer coating+B492:B493 water proof coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign matters, loose materials or anyother deposits of conrtamination by rubbing with wiore brush, As per SOR M-0625 for the year 2023- 24.

Supplying and applying of 3mm Epoxy flooring layer at base surfaces of the floor area -initial coat with Epoxy Based Epoxy Primer and applying 500 microns to 3mm thick Self Levelling Epoxy Screed including surface preparation and primer coat.Concrete Surface for Bonding the Top Coatings of Epoxy floor Coatings with Providing and applying 500 microns to 3mm thick Self Levelling Epoxy Flooring System which includes surface preparation, primer coat and topping with CUMIFLOOR 1000 SL..as per the manufacturer's product specification and approved colour.,complete including cleaning the surface,preparing for installation cum application,complying with standard specification and as directed by the departmental officers.

Fabricating, supplying and fixing of steel emergency exit door cum emergency window with MS angle 40x40x6mm outer frame, Ms angle 35x35x5 for shutter frame, stiffeners with 32x6mm Ms flat provided at regular intervals in the shutter frames 18 gauge CR sheet is laid as panel and welded all members are given one coat of red oxide primer and as directed by departmental officers.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

160mm dia PVC Pipe

110mm dia PVC pipe

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). White Glazed Wash Hand Basin

Without Pedestal

With Pedestal

Supplying and fixing of Oval Shape Wash Basin of size 560 x 450MM

Supplying and fixing of CP Heavy duty Bottle trap 32mm

Supplying and fixing of SS Elbow Action Tap of size 15mm

Supplying and fixing of SS Heavy duty Long body piller cock of size 15mm (with self released push type action)

Supplying and fixing of SS Heavy duty Long body Tap of size 15mm (with self released push type action)

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position best quality approved make white glazed earthernware sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] sink with fixing CI bracket

Supplying and fixing of SS Sink of size 600 x 450 x 200 MM

Supplying and fixing of SS Swan neck Tap

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with pvc pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed on to wall

Supply and fixing in position CP 2 way bib cock with Health faucet

Supplying and fixing in position White Special Delux Model Glazed Cascade Type Parryware/ Hindware / TOTO/Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P”or“S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and soft closeed seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 10.0 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as,15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications.

Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia CP stop valve and controlled the water flow with IR sensor valve (WHO), 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) White glazed earthernwere lipped mouth flat back urinal

Supplying and fixing of CP Stop Cock complete., complying with standard specifications and as directed by the departmental officers.

Supplying and fixing of White Porcelain Soap Dish of size 150 x 150 x 50 mm complete., complying with standard specifications and as directed by the departmental officers.

Supply and fixing of ABS body smart flow Hand Dryer with SS screws on the toilet wall.,complete..complying with standard specifications and as directed by the departmental officers.

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing of Special type Mirror of size 1000mm x 780mm.,complete..complying with standard specifications and as directed by the departmental officers.

Supply & fixing in position - SS towel ring.,complete..complying with standard specifications and as directed by the departmental officers.

Supply & fixing in position - SS dual coat/robe hook .,complete .. complying with standard specifications and as directed by the departmental officers.

Supplying, Installing & testing of Grab Bar etc., complete .. complying with standard specifications and as directed by the departmental officers.

Supplying, Installing & testing of Magnetic Door Stop SS304 Material SS Finish.,complete..complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms..,complete..complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position of standard shape automatic air freshener unit (135x100x230MM)with inbuilt hook points / bracket of the same materials with snap fittings of approved quality and colour.Dispenses up to 6,000 controlled shots of fragrance per cassette with a malodour neutraliser to eliminate unwanted smells .,complete..complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position of standard shape and 28x23.2 CM size compact multifold towel dispenser (M Fold dispenser) with inbuilt hook points / bracket of the same materials with snap fittings of approved quality and colour.The M fold dispenses interfolded towels without the need to touch the dispenser, helping to reduce contamination and the spread of germs .,complete.. complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Nahani Trap of size 100 x 75mm with stainless steel gratings

Nahani Trap of size 75 x 50mm with stainless steel gratings

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC soil / waste pipe

110mm dia PVC soil / waste pipe

160mm dia PVC soil / waste pipe

Supplying of PVC specials (labour charges paid wide pipeline Item) of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

PVC Elbow

160mm dia

110mm dia

75mm dia

PVC Elbow with Door

160mm dia

110mm dia

75mm dia

PVC Tee

160mm dia

110mm dia

75mm dia

PVC Bend

160mm dia

110mm dia

75mm dia

160mm dia

110mm dia

75mm dia

PVC "Y" with Door (Single)

160mm dia

110mm dia

75mm dia

PVC "Y" with Door (Double)

110mm dia

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).

160mm dia

110mm dia

75mm dia

Internal Water Supply Arrangements using uPVC pipes and uPVC specials Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

For laying UPVC pipe line of 20 mm dia

For laying UPVC pipe line of 25 mm dia

For laying UPVC pipe line of 32 mm dia

For laying UPVC pipe line of 40 mm dia

For laying UPVC pipe line of 50 mm dia

For laying UPVC pipe line of 50 mm dia (H)

External Water Supply Arrangements using uPVC pipes and uPVC specials Supplying, laying and jointing UPVC pipes (having schedule 80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works Above ground level

For laying UPVC pipe line of 32 mm dia

For laying UPVC pipe line of 40 mm dia

For laying UPVC pipe line of 50 mm dia

Below Ground Level For laying UPVC pipe line of 50 mm dia

Supplying UPVC Specials (with schedule 80) in water supply arrangements (both in internal and external water supply arrangements…Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed

UPVC Elbow

50mm dia

40mm dia

32mm dia

25mm dia

20mm dia

UPVC Tee

50mm dia

40mm dia

32mm dia

25mm dia

20mm dia

UPVC Union

50mm dia

40mm dia

32mm dia

50mm dia Horziontal

UPVC Bend

50mm dia

40mm dia

32mm dia

25mm dia

20mm dia

UPVC Coupler

50mm dia

40mm dia

32mm dia

25mm dia

20mm dia

UPVC Reducer

50 mm x 40 mm Dia

40 mm x 32 mm Dia

32 mm x 25 mm Dia

25 mm x 20 mm Dia

20 mm x 15 mm Dia

UPVC Elbow

50 mm x 40 mm Dia

40 mm x 32 mm Dia

32 mm x 25 mm Dia

25 mm x 20 mm Dia

UPVC Tee

50 mm x 40 mm Dia

40 mm x 32 mm Dia

32 mm x 25 mm Dia

25 mm x 20 mm Dia

Hex Nipple

50mm dia

40mm dia

32mm dia

Supplying, laying and jointing CPVC pipes (having working Standard Dimension ratio 11) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. For laying CPVC pipe line of 50 mm dia

Supplying, laying and jointing CPVC pipes (having working Standard Dimension ratio 11) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.

Above ground level

For laying CPVC pipe lines of 20 mm dia

For laying CPVC pipe lines of 25 mm dia

For laying CPVC pipe lines of 32 mm dia

For laying CPVC pipe line of 40 mm dia

For laying CPVC pipe line of 50 mm dia

Below Ground Level

For laying CPVC pipe line of 20 mm dia

For laying CPVC pipe line of 25 mm dia

For laying CPVC pipe line of 32 mm dia

For laying CPVC pipe line of 40 mm dia

For laying CPVC pipe line of 50 mm dia

Supplying CPVC Specials (having working Standard Dimension ratio 11) in water supply arrangements (both in internal and external water supply arrangements…Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing CPVC specials needs to be allowed

CPVC Elbow

50mm dia

40mm dia

32mm dia

20mm dia

CPVC Tee

50mm dia

40mm dia

32mm dia

20mm dia

CPVC Union

50mm dia

40mm dia

CPVC Coupler

50mm dia

40mm dia

32mm dia

25mm dia

CPVC Reducer

50 mm x 40 mm Dia

40 mm x 32 mm Dia

CPVC Elbow

50 mm x 40 mm Dia

40 mm x 32 mm Dia

CPVC Tee

50 mm x 40 mm Dia

40 mm x 32 mm Dia

Hex Nipple

50mm dia

40mm dia

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Gate Valve

50mm dia

40mm dia

32mm dia

Wheel Valve

40mm dia

32mm dia

25mm dia

Supply,Installing,testing and commissioning Air release valves confirming to IS standard 13039 with necessary flanges, nuts and bolts etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning.) complete.

32 mm Dia

25 mm Dia

20 mm Dia

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No.,(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set.,(c) Feed Pump 0.50 HP – 1 No.,(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.,(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos.,(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.,Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.,The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control,etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 250 Litres Capacity

Supply,installation cum commissioning of Booster pump - Domestic Water distribution System: System capable of delivering following discharge and Head requirements .The system shall consist of number of Pumps as specified below along with diaphragm Pressure Vessels suction & delivery manifold with isolation and non return valves, all mounted on a base frame and with fully automatic control panel with starters and necessary protections in Weather Proof box (IP55) and necessary suitable copper cables from starter panel to pump (Appx.20Mtrs/each pump) etc. Pumps shall be IE-3 Class rated. complete with necessary accessories. The panel shall have 2nos incomers with auto change over switch. ( For Top floor).The panel shall be compatible with BMS (MODBUS RS 485 / MSTP) Total system capacity : max.10Bar and 200-240V 50/60Hz and 100 LPM or 06 Cu.m/Hr ( Maximum ) 1.2Hp No of Pumps(Grundfos/equivalent): 01 working + 01 standby

Supplying, Installation, .Testing and Commissioning of electric driven Main Fire Pump (Hydrant ) suitable for automatic operation and consisting of following: complete in all respect as required.

Supplying , installation , testing and commissioning of electric driven Terrace / Mono Block Booster pump suitable for automatic operation and consisting of following : complete in all respect as required.

Supplying, Installation, Testing and Commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required.

FIRE PUMP PANEL

Supplying, Installation, .Testing and Commissioning of electric driven Jockey Fire Pump suitable for automatic operation and consisting of following: complete in all respect as required.

COMMON PANEL IN FIRE PUMP HOUSE

Fabrication, Supplying, Installation, Testing & Commissioning. of .electrical control panel, of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required. The MCC panel shall be provided with NO/NC contact with control relays for extending the following signals to be integrated with Main fire alarm control panel. (a) ON/OFF indication of Main Electrical Fire Pump, Pressurisation Pump. (b). Audio/visual indication of operation of Main Electric/Diesel Fire Pump with reset push button. (c) Pressure indication in Fire Fighting System (pressure transducer)

3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump.

4 core x 16 sqmm Aluminium conductor cable for Jockey Pump & Booster Pump.

12 core x1.5 sqmm Copper cable for Diesel Engine pump

2 core x 1.5 sqmm Copper cable for pressure switch

4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking.

G.I. earth plate electrode: Earthing with G.I. earth plate 600mmX600mmX6mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.

Providing and fixing 25 mm x 5 mm Gl Strip in 40 mm dia G.I.pipe from earth electrode as required.

Providing and Fixing 4 mm.dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing complete as required.

Fabrication and Installation of following sizes of perforated MS cable trays including horizontal and vertical bends, reducers, tees, cross-members and other accessories as required duly suspended from the ceiling with MS Suspenders and including painting with powder coating etc as required

100 mm,(W)x50 mm.(D)x1.6 mm(T)

150 mm.(W)x50 mm.<D)x1.6 mm(T)

300 mm.(W)x50 mm.(D)x1:6 mm(T)

Supplying, laying, testing & commissioning of 'C' class Heavy duty G.I Pipe conforming to IS 1239 Pt - I up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

250mm nominal dia

200mm nominal dia

150mm nominal dia

100mm nominal dia

80mm nominal dia

50mm nominal dia

25mm nominal dia

Supplying, installation testing and commissioning of Swing Check type Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, bolts, nuts, washers etc. as required.

150mm nominal dia

80 mm nominal dia

Supplying and fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with Non rising spindle, gun mental seat, ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 14846 of following sizes as required

250mm nominal dia

200mm nominal dia

150mm nominal dia

100mm nominal dia

80mm nominal dia

50mm nominal dia

Supplying, installing and commissioning C.I. flanged "Y" type Strainer with suitable flanges, nuts, bolts, gaskets etc. complete.

200mm nominal dia.

100mm nominal dia

Supply, fixing, testing and commissioning of air vessel tank made of 250mm dia, 8mm thick MS sheet, 1200mm. In height with aire release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Supply and installation of pressure switch for pumpset, siphon, Fittings like unions / colors / reducers etc.

Supply and installation of Pressure gauges of suitable range for pumpset, siphon, Fittings like unions / colors / reducers etc.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.conforming to IS 778 of following sizes as required

25 mm nominal dia

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for supporting suction and delivery pipe of each fire pump and delivery pipe to hydrant within the pump room.

Supply and installing the puddle pipe with flange on both end to be fixed on Fire Sump wall complete with all accessories.

250 mm nominal dia

100 mm nominal dia

Supplying, laying, testing & commissioning of 'C' class heavy duty G.I pipe conforming to IS 3589 and 1239, ERW, above ground including fittings like elbows, tees, flanges, tapers, nutsbolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

150mm nominal dia (External & Internal)

100mm nominal dia (Terrace)

80mm nominal dia

25mm nominal dia

150mm nominal dia

Supplying and fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with Non rising spindle, gun mental seat, ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 14846 of following sizes as required

150mm nominal dia

Supplying and fixing, testing & commissioning of Slim seal lever operated type Butterfly Valve of rating PN:1.6 with gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

150mm nominal dia ( Riser & Four way FBI)

100mm nominal dia (Terrace)

Supplying, installation testing and commissioning of Swing Check type Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required.

100 mm nominal dia (Terrace & Four way FBI )

Supplying, installing and commissioning C.I. flanged "Y" type Strainer with SS screen, suitable flanges, nuts, bolts, gaskets etc. complete.

100mm nominal dia (Terrace)

Supplying and fixing single headed internal & external hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and chain as required.

Supplying and fixing 63 mm dia, 15 mtr. long RRL hose pipe with 63 mm dia Male and-Female Gun metal couplings duty binded with Gl wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS .903, suitable for instantaneous connection to inter connect hose pipe coupling as required.

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with upto date amendments, complete with the following as required.

Supplying and fixing of hose cabinet of size 750 mm x 500 mm x300 mm made of 1.2 mm thick S.S sheet with 6 mm thick glazed glass -doors i/c necessary locking arrangement suitable to accommodate 2 Nos. 15 mtr. long Hose pipe,1N'o. branch pipe, mounted on wall or raised brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing 4way fire brigade connection of cast iron body with 4Nos. 63mm dia Gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 150mm dia MS pipe connection, conforming to IS 904 as required.

Supplying, installing, testing and commissioning of Wrapping & Coating for Under ground M.S. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line.

Supplying and fixing approved make 25mm dia. With automatic air release valve with unions etc. complete.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.onforming to IS 778 of following sizes as required

25mm nominal dia

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for laying above ground Hydrant/Spinkler Pipe.

Supply, Installing, testing and commissioning of Ductile Iron Class K-9 pipe conforming to IS: 8329 including tyton gasket, nuts and bolts, gasket, flanged pipe Tee, Reducer fittings (For Hydrant standpost) including Socket & spicot and etc. complete as required.

150mm nominal dia

Supplying, laying, testing & commissioning of 'C' class heavy duty G.I pipe conforming to IS 3589 and 1239, ERW, above ground including fittings like elbows, tees, flanges, tapers, nutsbolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

150mm nominal dia (External)

80mm nominal dia

150mm nominal dia

80mm nominal dia

Supplying and fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with Non rising spindle, gun mental seat, ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 14846 of following sizes as required

150mm nominal dia

Supplying and fixing, testing & commissioning of Slim seal lever operated type Butterfly Valve of rating PN:1.6 with gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

80mm nominal dia (External Yard Hydrant)

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Supplying and fixing 63 mm dia, 15 mtr. long RRL hose pipe with 63 mm dia Male and-Female Gun metal couplings duty binded with Gl wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS .903, suitable for instantaneous connection to inter connect hose pipe coupling as required.

Supplying and fixing of hose cabinet of size 750 mm x 500 mm x300 mm made of 1.2 mm thick S.S sheet with 6 mm thick glazed glass -doors i/c necessary locking arrangement suitable to accommodate 2 Nos. 15 mtr. long Hose pipe,1N'o. branch pipe, mounted on wall or raised brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying, installing, testing and commissioning of Wrapping & Coating for Under ground G.I. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line.

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for laying above ground Hydrant/Sprinkler Pipe.

Supplying, laying, testing & commissioning of 'C' class heavy duty G.I pipe conforming to IS 3589 and 1239, ERW, above ground including fittings like elbows, tees, flanges, tapers, nutsbolts, gaskets etc., fixing the pipe on the wall/ceiling Threaded road with suitable anchor fastner, Suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

150mm nominal dia

100mm nominal dia

80mm nominal dia

65mm nominal dia

50mm nominal dia

40mm nominal dia

32mm nominal dia

25mm nominal dia

Supplying and fixing, testing & commissioning of Slim seal lever operated type Butterfly Valve of rating PN:1.6 with gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

150mm nominal dia

100mm nominal dia

80mm nominal dia

Supplying, installing, testing and commissioning of hydralically operated Sprinkler alarm control valve, with water motor gong bell and basic trims as required, pressure gauges, drain valves, ball valves, etc. complete. Alarm valve shall be UL Listed / FM approved.

150mm nominal dia

Supplying fixing testing & commissioning of 15 mm size quartzoid bulb type Pendent sprinklers of rating 68 degree C, K 80 and orifice shall not be less than 12.7mm with required accessories.

Pendent sprinkler

Sidewall sprinkler extended coverage type

Supplying fixing testing & commissioning of 15 mm size quartzoid bulb type Pendent sprinklers of rating141 degree C, K 80 and orifice shall not be less than 12.7mm with required accessories.

Pendent sprinkler

Supplying, installing, testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through input Monitor Module.

150mm nominal dia

100mm nominal dia

80mm nominal dia

Supplying and fixing approved make 25mm dia. With automatic air release valve with unions etc. complete.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.onforming to IS 778 of following sizes as required

25mm nominal dia

50mm dia.

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for laying above ground Sprinkler Pipe.

Supply and installation of Supply and installation of 2 loop analogue addressable fire alarm panel, with 16 fire zone indicators, 80 character backlit LCD, 2 independent sounder circuits, Sound Alarms, Silence/Resound, Mute Buzzer, Accept, Reset buttons, 12 button alpha numeric key pad and 4 cursor keys, Fire, Fault, Test, Disablement, Delayed Mode, Alarms Silenced, Buzzer Muted, Sounders Disabled, Relays Disabled, Power, Supply Fault, CPU Fault, Sounder Fault and Earth Fault indicators, inbuilt battery charger with 2 x 7 AH 12 volts battery. With 485 Communication port.

Supply and installation of 5 loop analogue addressable fire alarm panel, with 16 fire zone indicators, 80 character backlit LCD, 2 independent sounder circuits, Sound Alarms, Silence/Resound, Mute Buzzer, Accept, Reset buttons, 12 button alpha numeric key pad and 4 cursor keys, Fire, Fault, Test, Disablement, Delayed Mode, Alarms Silenced, Buzzer Muted, Sounders Disabled, Relays Disabled, Power, Supply Fault, CPU Fault, Sounder Fault and Earth Fault indicators, inbuilt battery charger with 2 x 7 AH 12 volts battery. With 485 communication port.

Supply and installation of analogue addressable smoke detector photoelectric type with base, JB and led to operate on 24 v dc supply.

Supply and installation of Heat Detector with base , JB etc

Supply and installation of Response Indicators for detectors above false ceiling

Supply & installation of Fault Isolators Modules

Supply, installing, testing and commissiong of Analogue Addressable Input/Output Module or control Module interface unit

Supplying, installing, testing and commissioning of Analogue Addressable single input monitor Module for integrating Sprinkler flow switch with fire alarm system.

Supply and installation of addressable electronic sounders cum strobe wall mounting type.

Supplying, installing, testing and commissioning of Addressable Manual Call Point press type

Supplying, installing, testing and commissioning of Conventional Electrically operated Horizontal single mounting Emergency Siren with 1 KM Range

Supplying and laying of 2 core of 1.5 sq. mm, Annealed tin copper conductor, PVC Sheathed armoured FRLS Cable.

Supply & installation of power supply unit which provides 24 V dc output

Supplying, installing, testing and commissioning of solid state Amplifier of 240W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supplying, installing, testing and commissioning of solid state Amplifier of 1000W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supplying, installing, testing and commissioning of 6W wall mounted type speakers with mounting fixtures

Supplying and laying of 2 core of 1 sq. mm, Annealed tin copper conductor, PVC Sheathed armoured FRLS Cable.

Supplying and laying of 2 core of 1.5 sq. mm, Annealed tin copper conductor, PVC Sheathed armoured FRLS Cable.

Supply, Installation, Testing & Commissioning of 6 Zone Call Station with Keyboard

Supply, Installation, Testing & Commissioning of 4 Zone Call Station with Keyboard

Supply, Installation, Testing & Commissioning of 2 Zone Call Station with Keyboard

Supply, Installation, Testing & Commissioning of 12 Zone Call Station with Keyboard

Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with control discharge mechanism fittied with bend and horn etc. complete, confirming to IS: 15683.

Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with control discharge mechanism fittied with bend and horn etc. complete, confirming to IS: 15683.

ABC powder type fire extinguisher of 6 Kgs. Capacity,Mono Ammonium Phospate Powder 90, Stored pressure type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle etc. Complete. Confirming to IS:15683.

Mechanical Foam type fire extinguisher 9Lts. Capacity, stored pressure type controllable discharge mechanism. confirming to IS: 15683.

Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.

Signages with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm * 30cm and shall be fixed at the height of 2mts, from finished floor near Manual Call Points.

Supply, installing of FLOOR INDICATOR indicating floor no. in words, lettering size shall be 7.5 cm with contrasting colour from back ground size shall be 15 cm X 60 Cm

Supply, installing of IN CASE OF FIRE DO NOT USE LIFT signage size 8” x 8”.

Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 4" x 4"

Providing and fixing in position the signage of " Fire Hydrant & Hose Reel " to be pasted on door of the every fire shaft at all floors. . Size 6" x 8"

Providing and fixing in position the signage of " Fire alarm Panel " Size 6" x 8"

Sealing of Fire shafts at all floor levels by using M.S. angle Iorn frame around the shaft, M.S. chequered plate and PCC of 1:2:4 (100mm thick) on the plate for whole shaft area as per drawings and engineer - in - charge.

Supply and installation of RCC hume pipes of 450 mm dia & NP 2 Class with collars for road / below floor crossing of Fire water pipes. The rate shall includes excavation, PCC ( 1:4:8 100 mm thick)bed and ends shall be closed with Brick masonry work as directed by site engineer.

Supply and installation of RCC hume pipes of 300 mm dia & NP 2 Class with collars for road / below floor crossing of Fire water pipes. The rate shall includes excavation, PCC ( 1:4:8 100 mm thick)bed and ends shall be closed with Brick masonry work as directed by site engineer.

Supply & Construction of valve chamber with 230 mm Brick masonry wall with best quality TM bricks & CM 1:4,on a PCC 1:4;8 bed of 100 mm thcik.The wall shall be plastered internally smooth in CM 1:3, water proofing as required and externally rough plastered with sponge finish, including curing. The chamber shall be provided with M.S. 6 / 8 mm thick plate fabricated top cover in leaves with neccessory hinges and locking arrangement. The size of the chamber shall be 1200mm x 1200mm x 1500mm in depth.

ELECTRICAL

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire (Green clolur sleeve)and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire (Green colour sleeve) and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire (Green colour sleeve) and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

LIGHT FIXTURES

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 4' 20W LED fitting with LED on conduit pipe suspension with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 10W Decorative wall mounted LED fitting with LED with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 15W Recess LED fitting with LED with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 18W surface LED fitting with LED with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 6W LED Mirror fitting with LED with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of WT Bulk head fitting with guard and 15W LED bulb

Supply and fixing of Ceiling fixture 250/300mm complete with gallery etc. Clear glass opac / crystal with 15W LED bulb

Supply and fixing of Decorative chandliar fitting with LED bulbs

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting

supply and fixing of 15W LED square type surface fitting with LED (Higher end) on wall with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 4 meter Length single bracket GI steel tubular pole with Base plate 250 x 250 x6mm (76.10 mm OD x 3.65mm thick,x 4000mm length) with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC /polycarbonate box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and fixing of EXIT and ENTRY signage Board with connection

supply and fixing of modular type Key tag switch rated 10A with time delay future in modular GI box in flush with wall with earth coonection.

supply and fixing of modular type 25A 2 nos. Air break contact for controlloing AC Unit in modular GI box in flush with wall with earth coonection. FANS

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 375mm (15") sweep (Heavy duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (Lift well)

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 6A-32A DP MCB with sheet steel enclosure on wall with earth connection (Higher end)

Supply and fixing of32 A 4P MCB with sheet steel enclosure on wall with earth connection (Higher end)

Supply and fixing of 63A 4P MCB with sheet steel enclosure on wall with earth connection (Higher end)

Supply and fixing of 16A 3P MCB with sheet steel enclosure on wall with earth connection (Higher end) RUN OF MAINS

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour (for circuit mains, 5A sockets, UPS circuit,)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for 16A sockets and AC sockets

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 3 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour. for motors., or 3 phase equipments SPN MCB DBS

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no.20A DP RCCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End VTPN MCB DB

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 1 no. 63A 3P MCB ,9 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB as incoming and 1 nos. 63A 3P MCB , 5 nos. 32A 3P MCB as outgoing in flush with wall with earth connection only. Higher end

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 4no. 32A 3P MCB as outgoing in flush with wall with earth connection only. Higher End 7 SEGMENT TPN DB

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. 63A 4P MCB - 1 no. ii. 40DP RCCB -3 nos. iv. 6A to 32A SP MCB - 18 nos

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. 63A 4P MCB - 1 no. ii. 40DP RCCB -3 nos. iv. 6A to 32A SP MCB - 12 nos

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. 32A 4P MCB - 1 no. ii. 40DP RCCB -3 nos. iv. 6A to 32A SP MCB - 12 nos

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. 63A 4P MCB - 1 no. ii. 63DP RCCB -3 nos. iv. 6A to 32A SP MCB - 18 nos RING MAIN GEAR

Supply Erection ,testing and commissioning of 11KV, 25KA, 630Amps HT OUTDOOR three PANEL VACCUM CIRCUIT BREAKER For Consumer POS With 18KV, 10KA Polymer Type Surge Arrester.Horizontal Draw Out VCB fitted with Manual / Motor Operated spring charging mechanism with 230V AC Motor & Motor Control Switch, Mechanical ON / OFF indicator Operation Counter, Automatic safety shutters & push Shunt trip Coil, 110V DC. Closing Coil, 110V DC. Spare auxiliary contact, 6NO + 6NC. Anti pumping Feature, 110V DC.Power pack 230V-110V AC / 110V DC Potential Transformer, Three Phase, Resin cast, Dry type, Fixed Potential transformer with one set of HTFS / LTFS and one no. Neutral Link of Ratio : (11KV/√3) / (110V/√3) Current Transformer, Single phase, Resin Cast, Dry Type Current Transformer, Core 1: for meter, Cl-0.5s, 5VA, Core 2: for protection, Cl-5P20, 15VA. Metering, MFM, Digital Ammeter & Digital Voltmeter With Fault Level tripping & Fault Recording. Protection, Numerical Non-directional IDMT combined 3 O/C+1 E/F relay, High speed / Master trip relay, Indication Lamps, All LED Lamps, VCB OFF/ON/Auto trip/Trip circuit healthy/Spring charge indication lamps, R,Y,B Phase Indication Lamps. Heater ON / OFF switch with filament type 200Watts space heater & thermostat , single phase switch with socket, 40W cubicle Lamp for panel illumination with snap type door limit switch, Fuses/MCBs for AC/DC control. Cable Entry In and Out should be Separate Chamber. MS Sheet steel enclosure & installation with paint shade of RAL 7032 suitable for Indoor.

Supply and clamping at 11KV 3 core 185 sq.mm XLPE UG cable on wall with M.S. special clamps .(From 3Panel HT VCB to 500kva Transformer 1&2 Primary side).

Supply and providing cable end termination suitable for 11KV 3 core 185 sq.mm XLPE HTUG cable with necessary indoor type heat / cold shrinkable joint kit and accessories (Make : RayChem./ M-Seal) (3panel HT VCB-2 Nos.& Tr. 1&2 – 2Nos ) MV PANEL

Supply, erection, testing and commissioning of 630A draw out type floor mounted MV cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB’s and 1 No. ACB as Incomer units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4Nos.2Runs 2” X 1/2” tinned copper bus bar for 3 phases and neutral (2x 50mm x 12mm) and 2 Nos. of ear thing bus of size 1” X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator(Epoxy insulator) with maximum creep age distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set Incoming 1)Supply and fixing of 1 No. 630A 4 pole 50 ka , microprocessor based, EDO/MDO breaker 433V LT ACB confirming to IS 13947–2 IEC 60947–2 with suitable capacity with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with Micro processor Based SR 18 G relay, over current trip device adjustable to LTD, STD andrelease for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mold base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE rules in force with inter connection and terminations as required in specification. Bus Coupler:- Supply and fixing of 1 No 800A basic rating 4 pole 433 VLT ACB to IS-1394721EC60947-2 600VAC with all accessories for standard horizontal type ACB equipped withMicroprocessor based SR18G(w/o protection). Outgoing 1) Supply and fixing of 315A TPN MCCB-2Nos 2) Supply and fixing of 200A TPN MCCB-1No. 3) Supply and fixing of 160A TPN MCCB-1No 3) Supply and fixing of 125A TPN MCCB-4Nos Inter connecting the all LT ACB’s and MCCB’s to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve color coding of phases and neutral indication. Double Earth connection of the MCCB’s and ACB’s to earth bus using suitable tinned copper flats by 2 runs of 1”X 1/8” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with , 2 sets, of supply and fixing Electronic Trivector EC,300N class 0.5 flush mounting L&T or equivalent make–ModelER300N.Supply and fixing of danger board withSiemens grey powder coating with super scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting ,testing andcommissioning ( DATA-A5 ) (L&T,C&S,SIEMENS,ABB) LT PANELS

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make multifunction meter. cat no: WL4405310000 with one set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 1) 160A FPN 25 ka MCCB (L&T/siemens/eq.) - 1 No 2) 63A FPN 25 ka MCCB- 6 No.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 200A 4P MCCB -2nos. Interlocking arrangments -1 set. 125A 4P MCCB -8 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete.1.160A 4P MCCB -2nos. 2.Interlocking arrangments -1 set. 3.63A 4P MCCB -4 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 125A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -2nos. Interlocking arrangments -1 set. 63A 4P MCCB - 3nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 200A 4P MCCB -2nos. Interlocking arrangments -1 set. 63A 4P MCCB - 5nos. 32A 4P MCCB - 2nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 125A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Multifunction meter with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -1 no. 63A 4P MCCB -5 nos.

Supply and erection of 100 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 12 stage, (at 0.95 lag), made up of powder coated, 16 SWG CRCA sheet steel enclosure with 1 1/2" x 1 1 1/2" x 1/2" AI Frame work with RCC concreting foundation and bolted to masonry pedestal with 400A TPN MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters. a. Vr – R phase Line Voltage b.Vy – Y phase Line Voltage c.Vb – B phase Line Voltage d.Ir – R phase Line current e.Iy – Y phase line current f. Ib – B phase Line Current g. KW – Present Kilo Watts h. RKVA – Present KVAR Demand i. KVA – Present KVA j. PF – Present Power Factor k. Number of Capacitor bank ON/OFF l. Provision to indicate the imbalanced load m.Provision to indicate the change in phase Sequence n. The APFC Panel Should also have built in protection for current imbalance. For high Voltage/Low Voltage cut off, single phase Preventer, provision for inductor coil to cater the in-rush currents, line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel with necessary connection. Make. (Matrix /L&T /or equivalent

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Multifunction meter with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 250A 4P MCCB -1 no. 63A 4P MCCB -10 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 125A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Multifunction meter with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -1 no. 25A 2P MCB -33 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -1no. 32A 4P MCCB - 6nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 250A 4P MCCB -2nos. 125A 4P MCCB -1 no. 63A 4P MCCB - 4nos. 32A 4P MCCB - 1no.

Supply, erection, testing and commissioning of 800A draw out type floor mounted MV cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB’s and 1 No. ACB as Incomer units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4Nos.2Runs 2” X 1/2” tinned copper bus bar for 3 phases and neutral (2x 50mm x 12mm) and 2 Nos. of ear thing bus of size 1” X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator(Epoxy insulator) with maximum creep age distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set Incoming 1)Supply and fixing of 1 No. 800A 4 pole 50 ka , microprocessor based, EDO/MDO breaker 433V LT ACB confirming to IS 13947–2 IEC 60947–2 with suitable capacity with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with Micro processor Based SR 18 G relay, over current trip device adjustable to LTD, STD andrelease for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mold base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE rules in force with inter connection and terminations as required in specification. Bus Coupler:- Supply and fixing of 1 No 800A basic rating 4 pole 433 VLT ACB to IS-1394721EC60947-2 600VAC with all accessories for standard horizontal type ACB equipped withMicroprocessor based SR18G(w/o protection). Outgoing 1) Supply and fixing of 630A TPN MCCB-2 Nos. 2) Supply and fixing of 250A TPN MCCB-2Nos. Inter connecting the all LT ACB’s and MCCB’s to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve color coding of phases and neutral indication. Double Earth connection of the MCCB’s and ACB’s to earth bus using suitable tinned copper flats by 2 runs of 1”X 1/8” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with , 2 sets, of supply and fixing Electronic Trivector EC,300N class 0.5 flush mounting L&T or equivalent make–ModelER300N.Supply and fixing of danger board withSiemens grey powder coating with super scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting ,testing andcommissioning (L&T,C&S,SIEMENS,ABB)

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -1no. 63A 4P MCCB - 2nos. 32A 4P MCCB - 3nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 125A 4P MCCB -1no. 63A 4P MCCB - 3nos. 32A 4P MCCB - 3nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 250A 4P MCCB -1 no. 63A 4P MCCB - 7nos. 32A 4P MCCB - 2nos. UG CABLE (ALU & CU)

Supply and clarnping of 3 1/2 x 400 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and clarnping of 3 1/2 x 300 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and clarnping of 3 1/2 x 185 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and clarnping of 3 1/2 x 120 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and clarnping of 3 1/2 x 70 sq.mm. PVC LTUG armoured alu.cable on post or on wall with MS clamps

Supply and clarnping of 4 x 6 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps

Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps

Supply and clarnping of 3 x 2.5 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps

Supply and clarnping of 4 x 4 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG alu.cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 3 1/2 x 50 sq.mm PVC armoured LTUG alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 4 x 4 sq.mm PVC armoured LTUG copper cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 400 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 300 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 4 x 6 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 4 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 2 x 4 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3.5 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good for street lights

Supply and clarnping of 2 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

EARTHING

Supply and Run of 1 of No.8 SWG copper wire for earth connection

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 25mm x 3mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Run of 1 of 6 sq.mm PVC copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Run of 1 of 4 sq.mm PVC copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and run of 25mm x 6mm GI flat earh link with necessary clamps / supports on wall / floor / ground for earth connection

Supply and installation of 17.2mm dia 2 mtr. Low carbon steel earth electrode bonded with 250 microns copper with GI clamp to be installed in a suitable bore and filled with 50 lbs of cabon bond environment friently back filling compound . An RCC troughed of size 300 x 300 mm should be with RCC cover for protecting the electrode

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

RISING MAINS

Rising Main (Aluminium - Power ):- Design, Supply, Erection, Testing of 630A, 3L+N, Sandwich type Aluminium, Straight feeder (Rising Main), insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel painted,Plug in points at every floor necessary angle iron supporting of Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, N° of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C).

supply and fixing of 630A rising main end cover unit as per CEIG standard with earth connection

Supply and fixing of Tapoff Box suitable for 125/160A 4 pole 25 ka with as per the CEIG atandard with earth connection

Supply and fixing of Tapoff Box suitable for 200/ 250A 4 pole 25 ka with as per the CEIG atandard with earth connection

Supply and fixing of end cover suitable for 400/ 630A 4 pole 25 ka with as per the CEIG atandard with earth connection

supply and fixing of suitable rigid support bracket as per CEIG specification with earth connection

supply and fixing of suitable spring support as per CEIG specification with earth connection

supply and fixing of suitable wall support as per CEIG specification with earth connection

Supply and fixing of 400A 4P MCCB 25 ka with front operation handle on existing Top up box as per the CEIG standard with earth connection

Supply and fixing of 630A 4P MCCB 25 ka with front operation handle and door interlock as per the CEIG atandard with earth connection

Supply and fixing of 250A 4P MCCB 25 ka with front operation handle on existing Top up box as per the CEIG standard with earth connection

Supply and fixing of 160A 4P MCCB 25 ka with front operation handle on existing Top up box as per the CEIG standard with earth connection

Supply and fixing of 125A 4P MCCB 25 ka with front operation handle on existing Top up box as per the CEIG standard with earth connection

CABLE TRAYS

Supply and installation of sheet steel 2.5mm /2mm thick consisting 2 nos. side rail s with runs at every 250mm interval and complete with associated accessories such as coupler plates , Tees , long bend, elbows etc.Hot Dip Galvanized 65 microns tthick cable tray of size 35 x 35 x 5mm GI angle with 600mm width cable tray and 10mm threated GI rod supports upto 450mm with cable tray and they supports should be at 1.5m interval and grouting the supports in wall/ ceiling / floor as per the requirment in confimating with specification all as required size 150 x 50 x 2.0 mm thick

LIGHTNING ARRESTOR

Supply and installation of Early stemer Emmission air terminal (ESEAT) model S . The ESEAT- has corrossion resident stainless chrome body made up of AISI 316 grade of height 0.50 metres cablable of working in hazardous atmoshphere . The Air teminal is Non- radioactivity and requires no special license. The Unit is fully atonomous (No battery, No external power is required) Collects energy from ampient electric field . The ESEAT model has been tested in a High voltage laboratory in accurancy with NFC 17102 in order to measure the average gain in triggering .The averge gain in triggering time Δ T S (obtained during the lab test for the offered model is 60 μ sec. The ESEAT works on negative as well as positively polarised discharge . ESEAT has been tested for such discharge in central power research institute (CPRI) . A dedicated tester is available to test the healthness of the ESEAT on request (Page no.37, Point no. 3 of causes 8.6 of the revised NFC 17 -102 version 2011 . ESEAT model -s rarius of protection 46 metre . Level of protection cosidered for the project 2 level Mounting Structure Down Conductor

Supply and clamping of 1 x 70 sq.mm SC flexible multistrand unarmoured copper cable in Suitable HDPE pipe on wall/ ceiling/ roof top etc. with MS clamps .

TEST Link

supply and Installation of Test link box for each down conductor in order to disconnected the earth termination system to enable measurement of resident

Earth Electrode

supply and Installation of maintenance free GI earthing system comprssing of 50mm dia and 2 mtr. Length earth electrode of low carbon steel rod with 100 micron bonding and 25 kg. of carbon based environment friendly back fill compound and suitable clamp.

Surge Protection

Supply and installation cabinet type class I &II cabined model SPD to arrest surge and over voltage in the power line due to lightining switching action etc.They must be installed in the incoming MCCB panel/ DB of the respective Building in parrallel to the power circuit (Model PSV 4 -12.5/400TT) (3 phase power network)

Supply and fixing of 1 KVA microprocessor controlled sinewave electronic invertor system (UPS) with tubular batteries for one hour backup time with suitable interlink cable. closed special type MS powder coated battery rack.

Supply and fixing of 3 KVA microprocessor controlled sinewave electronic invertor system (UPS) with tubular batteries for one hour backup time with suitable interlink cable. closed special type MS powder coated battery rack.

Supply and fixing of 5 KVA microprocessor controlled sinewave electronic invertor system (UPS) with tubular batteries for one hour backup time with suitable interlink cable. closed special type MS powder coated battery rack.

Supply and fixing of 3 KVA microprocessor controlled sinewave electronic invertor system (UPS) with tubular batteries for Two hour backup time with suitable interlink cable. closed special type MS powder coated battery rack.

SAFETY ACCESSORIES

AC chargeable Emergency Lamp 2 x 11W PL lamp with all connecting accessories

2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

First Aid Box complete with all First Aid Medicines

Shock Treatment chart fixed in glass frame

4 nos. Fire Buckets made out of 40 x 40 x 6 mm MS angle

Hand Gloves 11 KV grade

Danger board as required by the Electrical Authorities

Fire extinguisher Co2, 4.5 Kg confirming to TAC Norms

Earth Dischard Rod

250 KVA GEN SET Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below with AMF panel. 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ Greaves/Equivalent) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate13. Residential Mufler 14. Fly wheel with starter ring. ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load 2. ALTERNATOR : Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.) 3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. 4. FUEL TANK : 350 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. 5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges.

Supply and Run of 12 core 2.5 sqmm armoured copper control cable FRLS in suitable PVC rigid pipe on wall/Ground/ ceiling with connection (For AMF to 250KVA Genset)

TELECABLING

Supply and run of 20mm dia. PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and run of 2 pair unarmoured 0.5mm Telephone cable in existing concealed PVC pipe including termination work.

Supply and fixing of RJ-11 I/O telephone socket complete in suitble module GI box inflush with wall with module front plate (Higher end)

Supply and fixing of 10 pair Krone in suitable powder coated GI box on wall .

Supply and fixing of 20 pair Krone in suitable powder coated GI box on wall .

Supply and fixing of 50 pair Krone in suitable powder coated GI box on wall .

Supply and run of 20 pair unarmoured 0.5mm Telephone cable in existing concealed PVC pipe including termination work.

Supply and run of 10 pair unarmoured 0.5mm Telephone cable in existing concealed PVC pipe including termination work.

CABLE TV WIRING

Supply and run of 20mm dia. PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and run of RG-11 Unarmoured coaxial cable for TV in existing concealed PVC pipe including termination work.

Supply and fixing of module TV socket complete in suitble module GI box inflush with wall with module front plate (Higher end)

Supply and fixing of 3 way splitter complete in suitble module GI box on wall with module front plate (Higher end)

DATA CABLING

Supply and run of 20mm dia. PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and run of CAT 6 cable in existing concealed PVC pipe including termination work.

CCTV SYSTEM

Supply and installation of 5MP IR fixed /Dome camera with key features of 2.8/4/6mm fixed lens, resolution 2560 x 1920 @15 fps , 25-30 mts length range IP 67 colour 0.01 Lux , BLC/3D NDR /ROI/HCL (Higer end)

Supply and Installation of 4 channel Network Video recorder with 1 sata , recording minimum 720P resolution in full HD , Hard disc support 4TB, USB, HDMI should be available with all accessories (Higher end )

Supply and Installation of 32 channel Network Video recorder with 2 sata , (2 Nos. Hard disc) recording minimum 720P resolution in full HD , Hard disc support 4TB, USB, HDMI should be available with all accessories (Higher end )

Supply and Installation of 4TB built in Hard Disc drive (Higher end)

supply and installation of 32 inches LED monitor with full HD with following features. Resolution 1920 x 1080, HDMI , audio in, built in speaker , 24/7 operation. (Higher end)

Supply and run of CAT 6 cable in existing concealed PVC pipe including termination work.

Supply and run of 20mm dia. PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and installation of 4 Port PoE switch for CCTV IP camera (Higher end)

Supply and installation of 8 Port PoE switch for CCTV IP camera (Higher end)

Supply and installation of 24 Port PoE switch for CCTV IP camera (Higher end)

PUBLIC ADDRESS SYSTEM

Supply and Installation of 240W PA Mixer Amplifier (Higher end)

Supply and Installation of 480W Booster Amplifier (Higher end)

Supply and Installation of 15W Wall speaker indoor/Outdoor (Higher end)

Supply and installation of Table top Microphone (Higher end)

Supply and Installation of DVD player (Higher end)

Supply and run of 2 core 1.5 sq.mm shielded copper speaker cable in suitable PVC rigid pipe on wall or ceiling and making good of the concealed portion

UG CABLES FROM HT ROOM TO BUILDINGS

Supply and laying of 3 Runs of 3 1/2 x 400 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 3 1/2 x 400 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x 400 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 1/2 x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3 1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 1/2 x 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 1/2 x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

HIGH MAST LIGHTS

Design, Supply, erection, Testing, Commissioning and handing over of High Mast Structure (Bajaj / Philips / Crompton make or equivalent) with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base mast section with vertically moveable hot dip galvanised lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos of 200W LED flood light luminaries with control gear box complete head frame assembly, pulley drive stainless steel wire rope single / double drum self-lubricating winch arrangements suitable for raising and lowering the luminaries carraige ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and templates including supply and fixing the following accessories in the Mast design and casting of suitable foundation with 1:2:4 mix RCC concreate with 30cm projection above the ground level with 1 mtr width x 1mtr length x 2 mtrs depth with necessary galvanised foundation bolts nuts and washers and dump plates enclosing the bolts nuts for high mast cosidering the safe soil bearing capacity at site-1 Set b) High powered power tool with complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V /50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch-1 SET c) Feeder pillar box comprising of 0.90m x 0.45m x1.20m floor angle iron frame with 63 A power contactor starter for the 3 Phase motor-1Set d) Neon aviation obstruction light (Bajaj/equivalent) - 1No. e)2Nos of special GI earth electode with copper plate 300 x300x3mm and copper flat (1"x1 1/4")inter connection as per ISS complete with earth connections-1SET f) Hot dip galvanised lighting arrester- 1 No)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 / 4 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply erection ,testing and commissioning of 500KVA/11KV /433V off load tap changing copper wound outdoor type distribution transformer conforming to relevant ISI 180 Level -2 standard and fitted with the following :a)HV cable end box suitable for Connection 3 core 185 Sq mm 11 KV, XLPE HT cable b) LV cable end box suitable for connection 3 runs of 31/2x400 Sq mm LTUG Cable c)Conservator with shut off valve d) Conservator drain plug valve e) Dehydration silicagel breather f) Expansion vent g) 4Nos plain rollers h) Thermometer pocket with dial type thermometer with caillary tubing with maximum reading position i) Drain plug/ valve ) Filter valvei) Oil filling hole and cap k) Oil level gauge I) two body earhing terminalsm) Rating and terminal marking plate n) Lifting hooks /lifting eyes jacking pad to facilitate movement of transformer and easy handiling 1 No (Each ) n) OFF load hand opereted tap changing switch at standing height from ground level o) Tapping on primary widing for voltage and vaiation 5% to +5 % p)Neutral on LV side to be available for 4 wire supply and brought out thought bushing for earthing q)Air release device r)The transformer should be supplied with first filling of oil All removable cover shall be provided with weather proof hot oil from the tank Sakthi/ Rowson /Voltech /IPL )/3Si Eco power/eq

Supply, installation, testing and commissioning of Variable Refrigerant Volume/Variable Refrigerant Flow (VRV/VRF) modular type air conditioning system complete with indoor and outdoor units with centralized controller with refrigerant piping, full charge of refrigerant gas and oil, control cabling as per drawings and the following items:

Outdoor Unit

Supply, installation, testing and commissioning of Modular type Air Cooled outdoor units equipped with highly efficient scroll/rotary compressors, with fully inverted compressors, complete with matching air cooled condenser with special acryl precoated heat exchanger fabricated from seamless copper tube & plate type aluminium fins of multi Row, Axial Flow type upward throw condenser fan with motor, Oil separator suitable for refrigerant piping, accumulator, liquid and gas shut-off valves and solenoid valves / modulation valve with fittings to interconnect compressor, condenser and evaporator coils, high/low pressure cut-outs, oil pressure failure switch, fan motor with low noise condenser fan, auto check function for connection error, auto address setting, safety thermostat, over current relay, fusible plugs, fuses etc. and suitable for operation on 380-440V, 3 phase, 50 Hz A.C. supply. The VRF System should have Eco- friendly green refrigerants like R-410A / R-407C. The charges including for factory charge of refrigerant gas & compressor oil and double layer of anti-vibration pads including PCC pedestals as required.

Indoor Units Concealed Fan Coil Unit Supply, installation, testing and commissioning of High/Mid/Low static concealed fan coil indoor units including blower, TEFC blower motor, suitable for operation on 240 ± 10% volts, 1 phase, 50 Hz A.C. supply, copper tube aluminium finned direct expansion cooling coil made of seamless copper tube and tested for 21Kg/cm², Insulated drain pan with inbuilt drain pump, pre filters, independent electronic control valve to control the refrigerant flow rate respond to variations of air conditioning load for the rooms with independent cordless remote, IR receiver for cordless remote, indoor mounted control panel, safety controls, control wiring and piping connections with anti-vibration mountings etc., as required. The quoted price shall be inclusive of cordless remote.

8.0 TR, 2825 CFM

6.4 TR, 2240 CFM

4.5 TR, 1410 CFM

4.0 TR, 1235 CFM

3.2 TR, 1130 CFM

2.6 TR, 740 CFM

2.0 TR, 700 CFM

4-Way Cassette Supply, installation, testing and commissioning of 4-way cassette type direct expansion indoor units including blower, TEFC blower motor, suitable for operation on 240 ± 10% volts, 1 phase, 50 Hz A.C. supply, copper tube aluminium finned direct expansion cooling coil made of seamless copper tube and tested for 21Kg/cm², Insulated drain pan with inbuilt drain pump, fresh air intake port with provision, pre filters, independent electronic control valve to control the refrigerant flow rate respond to variations of air conditioning load for the rooms with cordless remote, indoor mounted control panel, safety controls, control wiring and piping connections with anti-vibration mountings etc., as required.

3.2 TR, 1150 CFM

2.0 TR, 750 CFM

1.6 TR, 620 CFM

Control system

Supply, installation, testing and commissioning of centralized remote controller with license for operating and controlling the indoor units and outdoor units complete as required.

Supply, installation, testing and commissioning of incoming power cabling between safety isolator switch to VRV/VRF outdoor units. Cable size shall be as per the standard manufacturer requirements.

Supply, installation, testing and commissioning of 3cx1.5sqmm control cum transmission wiring & control cabling with 20mm PVC insulated, PVC sheathed, multicore copper conductor control cable in suitable PVC conduits between indoor and outdoor units.

Refnet joints

Supply and installation of separation tube or 'Y' or 'T' header refrigerant joints for liquid line and suction line including channels, supports, clamping arrangement. (The quantity shown here as 1no. are considering1no. for suction+1no. for liquid lines)

Refrigerant Piping - Hard drawn Supply, installation and testing of Interconnecting refrigerant piping with hard drawn copper including elbows and other fittings duly insulated with 'elastomeric nitrile rubber type' tubular insulation between refnet joint to refnet joint & refnet joint to outdoor units. All hard drawn piping inside the building shall be properly supported on open slotted trays and all external piping shall run in covered slotted tray.

41.3mm O.D.(Insulation -19mm thick)

34.1mm O.D.(Insulation -19mm thick)

28.6mm O.D.(Insulation -19mm thick)

25.1mm O.D.(Insulation -19mm thick)

22.2mm O.D.(Insulation -19mm thick)

19.1mm O.D.(Insulation -13mm thick)

15.9mm O.D.(Insulation -13mm thick)

12.7mm O.D.(Insulation -13mm thick)

9.53mm O.D.(Insulation -13mm thick)

Refrigerant Piping - Soft drawn Supply, installation and testing of Interconnecting refrigerant piping with soft drawn copper duly insulated with 'elastomeric nitrile rubber type tubular insulation between refnet joint to indoor unit. All soft drawn piping inside the building shall be properly supported on open slotted trays.

22.2mm O.D.(Insulation -19mm thick)

15.9mm O.D.(Insulation -13mm thick)

12.7mm O.D.(Insulation -13mm thick)

9.50mm O.D.(Insulation -13mm thick)

Slotted Tray Supply & Installation of Covered slotted tray for exposed refrigerant piping. Tray size shall be given below:

500mmx100mm

350mmx100mm

250mm x100mm

Refrigerant Charging Supply and charging of R-410A / R-407C refrigerant and oil for the above VRF / VRV system.

Drain Piping Supply and installation of 6kg/cm² pressure rating Rigid PVC for condensate drain with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. The drain pipe should duly insulated with 9mm thick 'elastomeric nitrile rubber type' tubular insulation.

25mm dia

32mm dia

40mm dia

Conventional Air-conditioning system (DX system) Standard Ductable split units Supply, installation, testing and commissioning of ductable split type air conditioning unit complete with hermetic scroll compressor, air cooled condenser with fan & motor, Evaporator cooling coil with fan & Motor, insulated drain pan, Integral refrigerant piping, safety controls & cutouts, drier with shut off valves, indoor mounted control panel housing the starters for various motors, control wiring with microprocessor panel. Charges including for installation, brazing work, Nitrogen pressure testing, vaccumizing the system, Factory charged refrigerant, oil and commissioning the Ductable unit. The System should have Eco- friendly green friendly green refrigerants like R-410A / R-407C. The quoted price shall be inclusive of PCC pedestals with double layer of anti-vibration pads.

17.0 TR, 6800 CFM (Twin Circuit)

8.5 TR, 3400 CFM

5.5 TR, 2200 CFM

Hi-Wall split units Supply, installation, testing and commissioning of 5 star rated Air conditioner with copper coil 1.5 TR, 600 CFM Hi-wall split type air conditioning unit with 4 KVA automatic voltage stabilizer with time delay relay with additional 6 Metre of 5/8" & 3/8" copper pipe cum suitable pipe cable with 3pin plug top, which includes the MS wall bracket for outdoor unit.

Refrigerant Piping for Standard DX type units Supply, installation and testing of hard drawn copper refrigerant piping including elbows and other fittings duly insulated with closed cell elastomeric nitrile rubber tube insulation between the indoor units and outdoor air cooled condensing units. The refrigerant piping should be complete with necessary supporting arrangements.

28.6mm O.D.(Insulation -19mm thick) for 8.5 TR ODU's

22.2mm O.D.(Insulation -19mm thick) for 5.5 TR ODU's

15.9mm O.D.(Insulation -13mm thick) for 8.5 TR ODU's

12.7mm O.D.(Insulation -13mm thick) for 5.5 TR ODU's

Power, Communication cable & Safety isolator

Supply, Installation & termination of communication cable between indoor unit to outdoor units for Ductable Split Unit. Cable size shall be as per the standard manufacturer requirements.

Supply, Installation & termination of copper incomer power cabling between safety isolator switch to Ductable outdoor units. Cable size shall be as per the standard manufacturer requirements.

Supply, Installation & termination of incoming power cables to Weather proof power isolator / Safety switching OFF mechanism near the Ductable split outdoor unit.

Refrigerant Charging

Supply and charging of additional charging of refrigerant due to increase of pipe length and compressor oil for above ductable split units.

Drain Piping Supply and installation of 6kg/cm² pressure rating rigid PVC for condensate drain with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. The drain pipe should duly insulated with 9mm thick 'elastomeric nitrile rubber type' tubular insulation.

25mm dia

32mm dia

40mm dia

Sheet Metal Ducting and Allied works Factory Made Galvanized Steel Sheet Duct Supply, installation and Testing of factory fabricated ductwork, made out of GSS ducts including elbows, turning vanes, neoprene gaskets slip on flanges, GI fully threaded rods, GI slotted channel supports etc., in accordance with the approved shop drawings and specifications. All the ducts should have factory made TDF flange regardless of size. Zinc coating should not less than 120GSM.

0.6mm thick galvanized steel sheet ducting

0.8mm thick galvanized steel sheet ducting

1.0mm thick galvanized steel sheet ducting

Flexible Duct connectors - Canvass

Supply and installation of pre-assembled duct connector made of fire retardant wouven fibreglass with silicon rubber coated fabric with TDF flanges at both ends to connect the equipment and ducts. The connector should have zipper provision for measuring off coil temperature.

GRILLES/DIFFUSER/SLOT DIFFUSER

Supply Air Squared Diffuser Supply, Installation and Testing of powder coated squared supply air diffusers as per the approved drawings and specifications. Each diffuser shall be equipped with fixed air distribution grid and removable key operated M.S collar damper with black matt finish for proper air distribution. The sample shall be approved by clients before procurement. Diffuser size shall be 600mmx600mm neck size 300mmx300mm.

Return Air Squared Diffuser Supply, Installation and Testing of powder coated squared return air diffusers as per the approved drawings and specifications. Each diffuser shall be equipped with fixed air distribution grid for proper air distribution. The sample shall be approved by consultants / architects / clients before procurement. Diffuser size shall be a)375mmx375mm neck size 300mmx300mm

Return Air Squared Diffuser Supply, Installation and Testing of powder coated squared return air diffusers as per the approved drawings and specifications. Each diffuser shall be equipped with fixed air distribution grid for proper air distribution. The sample shall be approved by consultants / architects / clients before procurement. Diffuser size shall be b)600mmx600mm neck size 300mmx300mm

DAMPERS

DAMPERS Volume Control Dampers Supply, Installation, Testing and Commissioning of multiblade aero foil type louver made out of aluminium with opposed blade operation dampers to be provided with suitable links, quadrants, levers and lock for manual control of air flow for proper distribution and balancing.

DAMPERS Fire Dampers Supply, Installation and Testing of UL listed UL 555:1995 and CBRI approved factory fabricated fire dampers made out high quality galvanized sheet steel with 16G thickness and interlocking type blades roll formed from 18G thick galvanized steel sheet, blade ramp formed from 16G thick galvanized steel sheet with a spring holder, 2 Nos of constant force Stainless steel springs and UL stamped fusible links which has fire rating of 165°F with extended GI sleeve of 450mm length / suitable flange for connecting to the duct. The damper should be rated for at least 120 minutes fire rating.

Powder coated extruded aluminium grille

Supply, installation, testing and balancing of power coated continuous linear grilles made out of high quality extruded aluminium. Each return air shall be provided with aluminium collar damper for proper air distribution. Deflection shall be 0o or 15o with four side flanges including mittered corners etc. in accordance with approved shop drawings.

Linear Slot Diffuser (Supply/Return)

Supply, Installation, Testing and Balancing of power coated linear Slot diffusers made out of high quality extruded aluminium with insulated plenum boxes as per the approved drawings and specifications. Each diffuser shall be equipped with hit and miss damper with black matt finish for proper air distribution. Size of linear slot diffuser shall be 20mm slot width with 4 slots (150mm Width)

Duct Insulation

Acoustic Insulation for ducts Supply and installation of acoustic insulation of ducts with 19mm thick open cell elastomeric nitrile rubber insulation with Class '0' FRR, smoothly stuck to the inner surface of the duct with suitable synthetic rubber adhesive as recommended by the insulation manufacturer.

Thermal Insulation for ducts Supply and installation of 13mm thick closed cell elastomeric foam Nitrile rubber insulation with Class '0' FRR, stuck to the outer surface of ducts with suitable synthetic rubber adhesive as recommended by the insulation manufacturer. All joints of the insulation shall be sealed with 50mm wide self adhesive tape of the same material as a sealant and vapor barrier.

Underdeck Insulation Supply and installation of 19mm thick closed cell elastomeric foam Nitrile rubber with Class'0' FRR stuck inside of the exposed roof with suitable synthetic rubber adhesive and the joints of the insulation shall be sealed with 75mm wide PVC self adhesive tape as a sealant and vapor barrier. The insulation protected firmly with supportive wire mesh.

Air Balancing Works

Charges for air conditioning units which are distributed by more than one outlet shall be balanced in supply air quantities as required in various zones and rooms to maintain the specified room conditions. The final balancing of air quantity through each grille/diffuser using flow-hood, shall be recorded and submitted to the Client for approval.

Ventilation Works Cabinet type Centrifugal Fresh Air Fan Supply, installation, testing and commissioning of Cabinet type Centrifugal type fan for fresh air application. The casing shall be made out of single skin galvanized steel sheet with internal insulation. The unit shall be complete with fan section with SISW/DIDW centrifugal forward/backward curved fan (with bearings mounted on the scroll and not on the fan casing) Fan motor, Class 'B' or Class 'F', IP-21 rated motor, direct driven / belt driven, an inlet and outlet should have flange connection for connecting ducts at both ends, drive guard, removable access panel for easy access for filter, motor & fan, washable type 10 micron pre filter provision and filter. The fan shall be suitable for installation on the ceiling. The noise level should not be more than 65dBA @ 3M level.

16500 CFM with 30mm TSP

8000 CFM with 25mm ESP

7000 CFM with 25mm ESP

6500 CFM with 25mm ESP

5000 CFM with 25mm ESP

4250 CFM with 25mm ESP

4000 CFM with 25mm ESP

3300 CFM with 25mm ESP

3000 CFM with 25mm ESP

1600 CFM with 25mm TSP

1500 CFM with 25mm TSP

1200 CFM with 25mm TSP

850 CFM with 25mm TSP

800 CFM with 20mm TSP

Cabinet type Centrifugal Inline fan for Exhaust Supply, installation, testing and commissioning of Centrifugal inline fan for exhaust air application. The casing shall be made out of single skin galvanized steel sheet with internal insulation. The unit shall be complete with Fan section, SISW/DIDW centrifugal forward/backward curved fan (with bearings mounted on the scroll and not on the fan casing) Fan motor, Class 'B' or Class 'F', IP-21 rated motor, direct driven / belt driven, fan inlet and outlet should have flange connection for connecting ducts at both ends, drive guard, removable access panel for easy access the motor & fan. The fan blades shall be made out of GRP/PPE/Epoxy coated suitable for exhausting air from toilets and also it should be suitable to install on the ceiling. The noise level should not be more than 65dBA.

8000 CFM with 30mm TSP

7000 CFM with 30mm TSP

6500 CFM with 30mm TSP

6000 CFM with 30mm TSP

5000 CFM with 30mm TSP

4000 CFM with 30mm TSP

3800 CFM with 30mm TSP

3300 CFM with 30mm TSP

1600 CFM with 20mm TSP

1500 CFM with 20mm TSP

1200 CFM with 20mm TSP

800 CFM with 20mm TSP

600 CFM with 20mm TSP

Kitchen exhaust fan

Supply, installation, testing and commissioning of Cabinet type SISW Centrifugal Blower, Direct Drive, Statically & Dynamically Balanced, Backward Curved Impeller fan, Anti- Vibration rubber Pads etc. Motor should be outside the stream with TEFC squirrel cage, weather protection shield, IP 55 rating with Class H Insulation motor, suitable for 415V/3Ph/50hz power supply. Fan shall be suitable for mounting from ceiling. Sound level should be 65dB @ 3mtr distance. Fan should be painted with 2 coats of zinc chromate primer and 2 coats of Epoxy paint. The quote shall include with all required accessories. The fan duty shall be 5000 CFM with 65 mm TSP.

Cabinet type Centrifugal fan for Exhaust

Supply, Installation, Testing and Commissioning of double skin centrifugal type fan for exhaust air application. The outer casing shall be made out of 0.63mm thick preplasticized and inner skin made out of 0.63mm plain galvanized steel sheet of 180 GSM with 25mm thick insulation of 38kg/m³ density PUF. The unit shall be complete with Fan section, DIDW centrifugal forward/backward curved fan (with bearings mounted on the scroll and not on the fan casing) TEFC Fan motor, IE-2, Class 'F', IP-55 rated motor, belt driven, fan inlet and outlet should have flange connection for connecting ducts at both ends, drive guard, removable removable access panel for easy access the motor, fan, marine light and door limit switch. The noise level should not be more than 60dBA @ 3M. The fan shall be suitable for installation on outdoor. Efficiency of the fan should be more than 65%. The quoted price shall be inclusive of canopy. Fan duties shall be 16500 CFM with 35mm TSP

Sleek type Propeller fans Supply, installation, testing and commissioning of Wall mounted compact in size sleek type propeller exhaust fan made up of plastic / polypropylene casing and double ball bearings with single phase with life lubricated class 'B' motors. Back draft louver arrangement in the fan casing for protecting from bird and rain water. The noise level should not be more than 30dBA. Power will be provided 2 M away from fan & necessary wiring with plug top will be mounted by AC contractor.

Propeller fans for toilet exhaust Supply, installation, testing and commissioning of wall mounted Industrial type compact propeller exhaust fans frame type with metal casing and double ball bearings with single phase, life lubricated class 'B' motors. Gravity shutters at air exhaust. The noise level should not be more than 40dBA. Power will be provided 3 M away from fan & necessary wiring with plug top will be mounted by AC contractor.

200 CFM with 10mm TSP

300 CFM with 10mm TSP

Flexible Duct connectors - Canvass

Supply and installation of pre-assembled duct connector made of fire retardant wouven fibreglass with silicon rubber coated fabric with TDF flanges at both ends to connect the equipment and ducts.

Power cable & Safety Switch OFF

Supply, Installation & Termination of incoming power cables between safety isolator switch to Exhaust/Fresh air fans. Cable size shall be as per the standard manufacturer requirements.

Supply and Installation of Weather proof power isolator / Safety switching OFF mechanism near the exhaust unit.

Sheet Metal Ducting and Allied works Factory Made Galvanized Steel Sheet Duct Supply, Installation and Testing of factory fabricated ductwork, made out of GSS ducts including elbows, turning vanes, neoprene gaskets, slip on flanges, GI fully threaded rods, GI slotted channel supports etc., in accordance with the approved shop drawings and specifications. All the ducts shall have factory made flange regardless of size. Zinc coating shall not less than 120GSM.

0.6mm thick GSS (24G)

0.8mm thick GSS (22G)

1.0mm thick GSS (20G)

1.2mm thick GSS (18G)

Powder coated extruded aluminium grille

Supply, Installation, Testing and Balancing of power coated linear squared grilles made out of high quality extruded aluminium. Each fresh air and exhaust air collar shall be provided with aluminium collar damper with black matt finish for proper air distribution. Deflection shall be 0o or 15o with four side flanges including mittered corners etc. in accordance with approved shop drawings. Grille sizes shall be as follows:

Diffusers Fresh air Squared Diffuser Supply, Installation, Testing and Balancing of power coated squared fresh air diffusers as per the approved drawings and specifications. Each diffuser shall be equipped with fixed air distribution grid and removable key operated aluminium collar damper with black matt finish for proper air distribution. The sample shall be approved by consultants / architects / clients before procurement. Diffuser size shall be as follows:

375mmx375mm neck size 300mmx300mm

300mmx300mm neck size 225mmx225mm

Exhaust air Squared Diffuser Supply, Installation, Testing and Balancing of power coated squared exhaust air diffusers as per the approved drawings and specifications. Each diffuser shall be equipped with fixed air distribution grid. The sample shall be approved by consultants / architects / clients before procurement. Diffuser size shall be as follows:

375mmx 375mm neck size 300mmx300mm

300mmx300mm neck size 225mmx225mm

Door Transfer Grilles for Toilets Supply and Installation of single frame door transfer grilles made out of High quality extruded aluminium profiles, the blades shall be inverted "V" type horizontal blades fixed rigidly to frame. Opening area shall not less than 50% of total area for free air circulation. Grille sizes shall be as follows:

300mmx150mm

500mmx200mm

600mmx300mm

Louvers

For Fresh air Supply and Installation of fresh air louvers with frame, filters and bird mesh. The louver shall made out of heavy duty extruded aluminium profile. The filter shall be washable and removable type in construction and thickness of the filter shall be 25mm thick as required. Bird mesh shall be of 12mm X 12mm x 1.5mm dia aluminium wire mesh. Opening area shall not less than 50% of total area for free air circulation.

For Exhaust air Supply and Installation of exhaust air louvers with frame and bird mesh. The louver shall made out of heavy duty extruded aluminium profile. Bird mesh shall be of 12mm X 12mm x 1.5mm dia aluminium wire mesh. Opening area shall not less than 50% of total area for free air circulation.

Sequential Timer Controller

Sequential Timer panel for standby units with necessary timers and logic control for automatic start-stop of the units. Logic should include orderly restart after Power failure. The total operating time of unit per day will be 12 hours. The timer controller should operate on time and also it should be BMS Compatible. The charges for control cabling and its accessories should include in the controller itself.

Smoke exhaust fans Supply, Installation, Testing & Commissioning of high efficiency dual speed tube axial fans complete with MS casing, impeller and flame proof high efficiency motor with class 'H" insulation for exhausting smoke under fire mode. Motor shall be suitable for operation on 415±10%V/3Ph/50Hz AC power supply and capable to withstand 250°C for a minimum duration of 2 hours. Axial flow fans shall be provided with inlet and outlet cones fabricated at site using GS sheet and necessary vibration isolation arrangement including spring type vibration isolators and rubber grommets etc. as required. Fan duties are as follows:

Fire mode: 18500 CFM @ 60 mm TSP, Normal mode: 9250 CFM @ 20 mm TSP

Fire mode: 8500 CFM @ 60 mm TSP, Normal mode: 4250 CFM @ 20 mm TSP

Fire mode: 8000 CFM @ 60 mm TSP, Normal mode: 4000 CFM @ 20 mm TSP

Fire mode: 6000 CFM @ 60 mm TSP, Normal mode: 3000 CFM @ 20 mm TSP

Pressurization fans Supply, installation, testing and commissioning of Cabinet type Centrifugal type fan for fresh air application. The casing shall be made out of single skin galvanized steel sheet with internal insulation. The unit shall be complete with fan section with SISW/DIDW centrifugal forward/backward curved fan (with bearings mounted on the scroll and not on the fan casing) Fan motor, Class 'B' or Class 'F', IP-21 rated motor, direct driven / belt driven, an inlet and outlet should have flange connection for connecting ducts at both ends, drive guard, removable access panel for easy access for filter, motor & fan, washable type 10 micron pre filter provision and filter. The fan shall be suitable for installation on the ceiling. The noise level should not be more than 65dBA @ 3M level. The quoted price shall be inclusive of canopy to protect from weather condition. Fan duties are given below:

21000 CFM @ 50 mm TSP for lift

15000 CFM @ 50 mm TSP for Fire Staircase

Power cable & Safety Switch OFF

Supply, Installation & Termination of incoming power cables between safety isolator switch to Exhaust/Fresh air fans. Cable size shall be as per the standard manufacturer requirements.

Supply, Installation, Testing & Commissioning of PLC control panel to integrated with fire alarm panel to smoke exhaust fans & pressurization fans. The PLC controller shall be suitable to integrate with BMS/IBMS.

Supply and Installation of Weather proof power isolator / Safety switching OFF mechanism near the exhaust unit.

Civil Works

All civil works pertaining to HVAC scope like breaking walls for supply, return, fresh air intake and exhaust, core cutting at beams making of holes for inserting copper pipes, drain lines, PCC pedestals for outdoor units etc. as required as per site conditions.(COTTAGE)

All civil works pertaining to HVAC scope like breaking walls for making of holes to inserting copper pipes, drain lines, SA ducts, RA ducts, FA ducts, EA ducts, VCDS, FD, etc. as required as per site conditions. (REST COMPLEX)

FURNITURE ITEMS

Supplying and placing in position of factory made furniture - Double bed cot made with the following specification and standard sizes.The head end and tow board made with 30mm thick and side facia boards are made with 18mm thick along with minimum of 04 nos 200 mm depth intermediate supporting panels for forming box type arrangement at the bottom of the top board made with 18mm boiled water proof (BWP) high quality plywood.The bottom of the head & tow boards fixed and supports over the high density polymer studs.The supports, side and top surfaces are fixed with adequate fixtures,screws and the surface are finished with 1mm thick laminates along with factory made post form edges / 2mm edge bands.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product. ( Size 5'6" x 6'3")

Supplying and placing in position of factory made furniture - Single bed cot made with the following specification and standard sizes.The head end and tow board made with 30mm thick and side facia boards are made with 18mm thick along with minimum of 04 nos 200 mm depth intermediate supporting panels for forming box type arrangement at the bottom of the top board made with 18mm boiled water proof (BWP) high quality plywood.The bottom of the head & tow boards fixed and supports over the high density polymer studs.The supports, side and top surfaces are fixed with adequate fixtures,screws and the surface are finished with 1mm thick laminates along with factory made post form edges / 2mm edge bands.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product. ( Size 3'3" x 6'3")

Supplying and placing in position of factory made furniture - Wide size Single cot made with the following specification and standard sizes.The head end and tow board made with 30mm thick and side facia boards are made with 18mm thick along with minimum of 04 nos 200 mm depth intermediate supporting panels for forming box type arrangement at the bottom of the top board made with 18mm boiled water proof (BWP) high quality plywood.The bottom of the head & tow boards fixed and supports over the high density polymer studs.The supports, side and top surfaces are fixed with adequate fixtures,screws and the surface are finished with 1mm thick laminates along with factory made post form edges / 2mm edge bands.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product. ( Size 4'0" x 6'3")

Supplying and placing in position of factory made furniture - Ward robe made with the following specification and standard sizes.The double door storage unit made with 18mm thick all side facia boards except 12mm thick back side board and 15mm thick shutters.The inner surface of the storage unit divided vertically 04 parts with 15mm white laminate finished plywood and horizontally 02parts.The horizontal inner boards/shelf are should have a provision for custom made positioning and one of the portion should have a hanging rail for cloths. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the facia boards fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws and shutters should have a locking facilities along with 04 Nos soft closing hinges.The plywood,Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product. (5'0"x7'0")

WARDROBE 1 ( 1500mm X 600mm X 2100mm)

WARDROBE 2 ( 2200mm X 600mm X 2100mm)

WARDROBE 3 ( 2400mm X 600mm X 2100mm)

WARDROBE 4 ( 3000mm X 600mm X 2100mm)

Supplying and placing in position of factory made furniture - AStorage Rackmade with the following specification and standard sizes.The double door storage unit made with 18mm thick all side facia boards except 12mm thick back side board and 15mm thick shutters.The inner surface of the storage unit divided vertically 04 parts with 15mm white laminate finished plywood and horizontally 02parts.The horizontal inner boards/shelf are should have a provision for custom made positioning and one of the portion should have drAWER ARRangement . The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the facia boards fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws and shutters should have a locking facilities along with 04 Nos soft closing hinges.The plywood,Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Storage rack ( 2200mm X 600mm X 2100mm)

Supplying and placing in position of factory made furniture - LUGGAGE RACK ( 1500mm X 600mm X 2100mm) cum utility ledge made with the following specification and standard sizes.The Luggage table with above mentioned top size along with 750mm height from finished floor level and the top surface finished with steel stripes on the top.

LUGGAGE RACK

Supplying and placing in position of factory made furniture - of specified size work table cum utility ledge made with the following specification and standard sizes.The work table with above mentioned top size along with 750mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood.The Work unit should have a one side - single drawer made with 12mm thick plywood.The inner surface of the drawer finished with 1mm thick white colour laminate and with soft closing arrangement. The specified size length utility ledge fixed aside of the Work table to match with the top surface of the Work table.The 26 mm wide solid surface facia should finished with 18mm plywood fully covered at top and facia and 50mm wide at bottom surface. The whole furnishing surface of the Work table cum ledge supports over 18 mm thick plywood verticals.The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws,etc.The plywood, Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Work table - 1850 x 450mm (WT 2)

Work table - 1700 x 500mm (WT 2)

Work table - 1500 x 500mm (WT 1)

Work table - 1000 x 500mm ( WT 3)

Supplying and placing in position of factory made furniture - TV wall unit(1500 mm X 1200 mm)made with the following specification and standard sizes.The wall unit with above mentioned facia size along with reguired height from finished floor level based on the particular wall surface to be fixed/hanged firmly over existing painted wall surface with adequate fixtures, screws, etc.The wall unit should have a 200 mm wide and 40mm thick ledge for TV signal receiver unit made with 12mm plywood.The supports,side and top surfaces are fixed with adequate fixtures,screws and the surface are finished with 1mm thick laminates along with factory made post form edges / 2mm edge bands. The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Vanity mirror (2000 mm X 600 mm)made with the following specification and standard sizes.The wall fixed mirror with above mentioned facia size along with reguired height from finished floor level based on the particular wall surface to be fixed/hanged firmly over existing painted wall surface with adequate fixtures, screws, etc.The bevelled edge 8mm thick mirror fixed over 12mm plywood with 3M mirror tape and edges of the plywood finished with 2mm edge band.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - 1200 mm wide low height table with shoe shelf at bottom (600 mm X 1200 mm) made with the following specification and standard sizes.The utility table with above mentioned top size along with 600mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/Eq'vnt) over 18mm plywood. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood,Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Side table with drawers (450mmX600mmX 450mm) made with the following specification and standard sizes.The side table with above mentioned top size along with 450mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands. The side table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws , etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design, colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Side table with drawers (450mmX300mmX 450mm) made with the following specification and standard sizes.The side table with above mentioned top size along with 450mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands. The side table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws , etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design, colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Side table with drawers (450mmX450mmX 450mm) made with the following specification and standard sizes.The side table with above mentioned top size along with 450mm height from finished floor level and the top surface finished with 1mm laminate over 18mm plywood. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands. The side table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Tea poy (450mmX750mmX 450mm) made with the following specification and standard sizes.The teapoy with above mentioned top size along with 450mm height from finished floor level and the top surface finished with 1mm laminate over 18mm plywood. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood,Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - Dining table (900mmX600mmX 750mm) made with the following specification and standard sizes.The table with above mentioned top size along with 750mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/Eq'vnt) over 18mm plywood and the legs are made with 2mm thick High polished SS 30mm square tube along with leg rest at middle.The bottom surface of the table finished with 0.8mm thick white colour laminate. The whole furniture made with boiled water proof (BWP) high quality plywood and laminates along with factory made post form edges / 2mm edge bands.The bottom of the ss legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

4 SEATER DINING TABLE

Supplying and placing in position of factory made furniture - Dining table (600mmX600mmX 750mm) made with the following specification and standard sizes.The table with above mentioned top size along with 750mm height from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/Eq'vnt) over 18mm plywood and the legs are made with 2mm thick High polished SS 30mm square tube along with leg rest at middle.The bottom surface of the table finished with 0.8mm thick white colour laminate. The whole furniture made with boiled water proof (BWP) high quality plywood and laminates along with factory made post form edges / 2mm edge bands.The bottom of the ss legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - premium letherite finished 3 seater sofa made with the following specification and standard sizes.Providing and fixing sofa set to detail as shown in drawing about 60cm wide and about 68cm high comprising country wood framework using 50 x 40 with 8mm thick com plywood covering on all sides. Seats finished with spring hooked to MS plate 25mm width fixed to the seat frame. Both seat frame and back covered with layer of jute cloth and 75mm latex rubber (2 layer for seat alone) finished with 12mm foam lining and uphostered to shape with fabric for the rear of the back also and the under surface of the seat finished with Gada cloth 8mm ply below seat.The bottom of the legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - premium letherite finished single seater sofa made with the following specification and standard sizes.Providing and fixing sofa set to detail as shown in drawing about 60cm wide and about 68cm high comprising country wood framework using 50 x 40 with 8mm thick com plywood covering on all sides. Seats finished with spring hooked to MS plate 25mm width fixed to the seat frame. Both seat frame and back covered with layer of jute cloth and 75mm latex rubber (2 layer for seat alone) finished with 12mm foam lining and uphostered to shape with fabric for the rear of the back also and the under surface of the seat finished with Gada cloth 8mm ply below seat.The bottom of the legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - premium Fabric finished 3 seater sofa made with the following specification and standard sizes.Providing and fixing sofa set to detail as shown in drawing about 60cm wide and about 68cm high comprising country wood framework using 50 x 40 with 8mm thick com plywood covering on all sides. Seats finished with spring hooked to MS plate 25mm width fixed to the seat frame. Both seat frame and back covered with layer of jute cloth and 75mm latex rubber (2 layer for seat alone) finished with 12mm foam lining and uphostered to shape with fabric for the rear of the back also and the under surface of the seat finished with Gada cloth 8mm ply below seat. The bottom of the legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures, screws , etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design, colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - premium fabric finished single seater sofa made with the following specification and standard sizes.Providing and fixing sofa set to detail as shown in drawing about 60cm wide and about 68cm high comprising country wood framework using 50 x 40 with 8mm thick com plywood covering on all sides. Seats finished with spring hooked to MS plate 25mm width fixed to the seat frame. Both seat frame and back covered with layer of jute cloth and 75mm latex rubber (2 layer for seat alone) finished with 12mm foam lining and uphostered to shape with fabric for the rear of the back also and the under surface of the seat finished with Gada cloth 8mm ply below seat.The bottom of the legs fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

OVERHEAD STORAGE

Supplying and placing in position of factory made furniture - over head storages with the depth of 450MM which consist of 18mm thk. made with boiled water proof (BWP) high quality plywood and laminates along with factory made post form edges / 2mm edge bands. shutter with box type hinges of approved make & required 2mm thick edge band with approved laminate on all the edges. The shutter should be made of of 15mm thk. BWP Plywood and interior finished with 0.8mm white colour laminate. All the external surfaces shall be finished with 1.0mm thk. Laminate of approved make.The supports,side and top surfaces are fixed with adequate fixtures, screws ,etc.The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

STAFF CHAIR( MEDIUM BACK) WITH REVOLVING AND TILTING ARRANGEMENT as per above specification.

HIGH BACK WITH REVOLVING AND TILTING ARRANGEMENT

FIXED CHAIRS - but the Chairs have Fixed back having no tilting mechanism .

Dining Hall chair - SS finish

Visitor chair

Window roll up's-Supply and eraction fixing in place of synthetic fibre roller blinds with adequate roll up mechanism and scotch guards,all required accessories.- complete in all respects complying with relevant standard specification.This work includes the cost of material,Labour Charges for fixing Conveyance, any Scaffolding,etc.. complete.

Window roll up's-Supply and eraction fixing in place of double layer sheer curtains with adequate railing,hooks and scotch guards,all required accessories.- complete in all respects complying with relevant standard specification.This work includes the cost of material,Labour Charges for fixing Conveyance, any Scaffolding,etc.. complete.

Supplying, installation and placing in position of water proof textured /opaque wall paper with sustained RH level 25% to 95% over well finished vertical or horizontal surface.Rate is inclusive all necessary fixtures and solvent,Labour Charges for fixing etc. complete in all respect.complying with relevant standard specification.

Bed head support panel with Cushion

Supplying and placing in position of factory made furniture - L SHAPE Reception table (2000mmX2400mmX 1050mm) made with the following specification and standard sizes.The table with above mentioned top size along with 1050mm height at front and rear side ledge with 450mm wide work space and 750mm from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood and work space finished with 1mm laminate over 18mm plywood. The table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood and locking arrangements to be provided for drawers and shutters.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws , etc. The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - L SHAPE Reception table (2000mmX2400mmX 1050mm) made with the following specification and standard sizes.The table with above mentioned top size along with 1050mm height at front and rear side ledge with 450mm wide work space and 750mm from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood and work space finished with 1mm laminate over 18mm plywood. The table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood and locking arrangements to be provided for drawers and shutters.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws , etc. The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - L SHAPE Reception table (2600mmX3500mmX 1050mm) made with the following specification and standard sizes.The table with above mentioned top size along with 1050mm height at front and rear side ledge with 450mm wide work space and 750mm from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood and work space finished with 1mm laminate over 18mm plywood. The table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood and locking arrangements to be provided for drawers and shutters.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws , etc. The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Supplying and placing in position of factory made furniture - L SHAPE Reception table (1000mmX1300mmX 1050mm) made with the following specification and standard sizes.The table with above mentioned top size along with 1050mm height at front and rear side ledge with 450mm wide work space and 750mm from finished floor level and the top surface finished with 4mm thick polymer solid surface (corian/LG/ Eq'vnt) over 18mm plywood and work space finished with 1mm laminate over 18mm plywood. The table unit should have a minimum of two drawer and/or one drawer with one openable shutter made with 12mm thick plywood and locking arrangements to be provided for drawers and shutters.The inner surface of the side table finished with 1mm thick white colour laminate and with soft closing arrangement. The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs. The supports,side and top surfaces are fixed with adequate fixtures,screws , etc. The plywood, Laminates, edge band or finishing of the post form surface as per approved design,colour, finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product.

Dining chairs and tables

A) 6 SEATER

B) 7 SEATER

C) 8 SEATER

D) 9 SEATER

Supplying and placing in position of factory made furniture -TV CONSOLE table cum utility ledge made with the following specification and standard sizes.The console table with above mentioned top size along with 600mm height from finished floor level and the top surface finished with laminate fnish as specified over 18mm plywood.The Work unit should have a one side - single drawer made with 12mm thick plywood.The inner surface of the drawer finished with 1mm thick white colour laminate and with soft closing arrangement. The 300 mm wide and 1200 mm length utility ledge fixed aside of the Work table to match with the top surface of the Work table.The 26 mm wide solid surface facia should finished with 18mm plywood fully covered at top and facia and 50mm wide at bottom surface. The whole furnishing surface of the Work table cum ledge supports over 18 mm thick plywood verticals.The whole furniture made with boiled water proof (BWP) high quality plywood and 1mm thick laminates along with factory made post form edges / 2mm edge bands.The bottom of the supports fixed and supports over the high density polymer studs.The supports,side and top surfaces are fixed with adequate fixtures,screws,etc.The plywood, Laminates,edge band or finishing of the post form surface as per approved design,colour,finishes and standards.The samples / mock to be approved by the authority before produce the whole quantity of the product. TV CONSOLE

Sub Total

R R THULASI BUILDERS INDIA P LTD

GMS Elegant Builders I Pvt Ltd