8478 PROVN OF FOUR AND TWO WHEELER PARKING HEAT STROKE ROOM INCLUDING DETN ROOM AND WAITING ROOM FOR ALL RANKS WITH ALLIED FACILITIES AT BLDG NO P 68 MI ROOM AND SPECIAL REPAIRS TO BLDG NO 24 MI LINE OF MINTSD UNDER AGE BR II OF GE SOUTH PUNE

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. not exc. 10 sqm on plan and not exc. 1.5 m in depth and getting out in hard / dense soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. not exc. 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed

Removing excavated material not exc. 250m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Surface excavation in soft / loose soil n.exc. 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Moorum / red bajri filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete of any description and in any position, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20 mm graded stone aggregate as in foundation including rafts, footing foundation beams, base for column and mass concrete etc. , complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded brick aggregate) foundation filling and mass concrete etc, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in column or struts etc. , complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc., complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in chajja etc. , complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 mixed with water proofing compound on concrete / brick surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for integral water profing compound, complete all as specified and directed.

M & L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below and cleaning the surface of slab with wire brushes removing dust foregin material including flushing at junction of walll complete all as specified and directed by Engr-in-Charge :- (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) M&L for preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm on all surfaces. (c) M&L for laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as per manufacturer's instructions or as specified & joints sealed and applied complete by torch application method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for to check the leakage & seepage and rectifying the same to the entire statisfaction of Engr-in-charge. (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge.

M&L for form work to soffits of suspanded flat slab such as roof slabs, floor slabs, landing, shelves and similar work n. exc. 200mm thick (horizontal or sloping), finished the surfaces fair, complete all as specified and directed.

M&L for form work to soffit and sides of floor / roof beams & lintel, finished the surfaces fair, complete all as specified and directed.

M&L for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed.

M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for form work to chajja, finished the surfaces fair, complete all as specified and directed.

M&L TMT bars, 6-8mm, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Mild steel bars 10 mm dia deformed or twisted and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Demolition of brickwork or precast block masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc or cutting out defective brick work for under pining including providing, fixing and removing shoring, cleaning and stacking brick, removing surplus serviceable bricks, hardcore etc to store and rubbish not exceeding 50m, complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6 complete, complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work / concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed.

M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed.

M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash, complete all as specified and as directed.

M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries and apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceeded 1mm and total thickness of putty should not be less than 1.5mm complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S & F three track sliding window with two or more shutter with and including 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for aluminium powder coated louvered ventilator with making suitable space for fixing exhaust fan using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) SP 20048 (b) Glazing clips 19352

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge :- Two track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, with particle board core, fixed in frame at site as per specification and drawing including all fittings & fixtures, complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with end of bar shouldered and/or riveted or forged in to spikes framed gaured bars barred iron doors, ladders, framed blausters, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde-E-165, complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates with and including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm including filled with PCC 1:3:6 type C-0 in door frames, complete all as specified and directed.

S&F 35mm thick IInd class hard wood (Kiln seasoned and chemically pressure treated) factory made panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rails will be as per IS 1003 (Part-I), complete all as specified and directed.

S & F 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI marked hinge pin, anodised and fixed with wooden screws, complete as specified and directed.

S&F Aluminium anodised 150mm handle cast type, complete as specified and directed.

Supply and fixing 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark.complete all as specified and directed

M&L for hardcore with granite or trap stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for ATT for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engr-in-Charge.

M& L for ATT for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed by Engr-in-Charge.

M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engr-in-Charge.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed by Engr-in-Charge.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 (Using 40 mm graded stone aggrgate) as in sub base 75 mm thick etc complete all as specified & directed.

M&L for 25 mm thick plain cement concrete type B-0 (1:2:4) ( 12.5 mm graded stone aggregate ) as in floors complete all as specified and directed.

M&L for vitrified coloured tiles 8 to 10 mm thick light shade (square / rectangular) polished, area of each tile exceeding 0.42 sqm but n. exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including screed bed of 15 mm thick in CM (1:4), complete all as specified and directed.

M&L for vitrified coloured tiles 8 to 10 mm thick any shade (square / rectangular) polished , area of each tile exceeding 0.42 sqm but n. exc 1 sqm, as on vertical surface such as dado / skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10 mm thick rendering in CM (1:3) including filleting triangular shape on top edge, complete all as specified and directed.

M&L granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, set and jointed in neat cement slurry and laid over and including 15mm thick bedding layer in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade, complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

Material and labour for coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick of colour and pattern as approved by EIC, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles, laid over and including 15 mm thick bedding layer in CM 1:4, complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 600mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles laid over and including 10 mm thick rendering in CM (1:3) including filleting triangular shape on top edge, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball brass valve high pressure including with rod & high density plastic ball & tank nipple of suitable size, complete all as specified and as directed.

Supply and fix 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls & ceilings or laid in floors etc, complete all as specified and as directed.

S&F 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls & ceilings or laid in floors etc, complete all as specified and as directed.

S&F 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls & ceilings or laid in floors etc, complete all as specified and as directed.

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F in repairs 75mm dia, cast iron floor trap with stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F high density 32mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc, complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor for 110mm bore of 6kgf/cm2 capacity, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor for 75mm bore of 6 kgf/cm2 capacity, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110mm bore of 6kgf/cm2 capacity, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 75mm bore of 6kgf/cm2 capacity, complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (singleT) equal or unequal nomminal bore in mm joints fixed to walls for 110mm bore, complete all as specified and directed.

Supply and fixing PVC Bends any radius 110mm bore, complete all as specified and directed.

Supply and fixing PVC Bends any radius 75mm bore, complete all as specified and directed.

Supply and fixing PVC vent cowl 110mm dia, complete all as specified and directed.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling timber scantling in any position (unframed work) exc. 40sqcm in section complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section, complete all as specified and directed.

M&L for roof tiles mangalore pattern inter locking at side joints laid dry etc tiles or similar tiles as in roofing etc, complete all as specified and directed.

Fixing only roof tiles Mangalore pattern inter locking at side joints laid dry etc tiles or similar tiles as in roofing etc , complete all as specified and directed.

S&F for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc, complete all as specified and directed.

M&L for plain fillets of IInd class hard wood exc. 13 but not exc. 25 sqcm in section square rectangular or triangular in section, secured with screws complete all as specified and directed.

M&L for 2nd class hard wood as in scantling, clean sawn timber complete all as specified and directed

M&L for weather boarding, 2 nd class hard wood clean sawn, thickness 20mm to 25 and rebated on thick edge to give 20mm laps and fixed to wooden/ steel member, complete all as specified and directed.

Dismantling wall and ceiling boards, any thickness, including cover fillets etc. complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed. (Note:- Cost of making frame work suitable for fixing light fittings / grills / diffusers and cutting to shape in ceiling etc shall be deemed to be included in unit quoted rates.

S&F POP designer cornices of width 100mm with fixing arrangement etc complete all as specified and as directed.

M&L for rolled mild steel as in joist, channel, angle, or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths I.e. within 20mm of the length indicated) of Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

M&L for steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction but welded tubes confirming to IS 1161-1979 grade St.-240, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping on top of wall, bed blocks and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate) lean concrete for mass concrete, subbase floor etc, complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer, complete all as specified and directed

M&L for preparation of old plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer, complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying, two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old painted surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc , complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust / grit including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and direcetd.

All as per item no.112 above but except precast cement concrete interlocking paver block, complete all as specified and direcetd.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 75mm thick stone dust / grit including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and direcetd.

S&F powder Coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) suitable for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for cleaning of Manglore tile roof by scrapping, cleaning by water jet etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes / washout, contractor has to re-paint with the Apex at his own cost.

M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

S&F 320mm dia UPVC rain water gutter (320mm height) including all fittings such as end drop, running drop etc, complete all as specified and as directed.

S&F Single piece-WC with PP Seat cover, hinges, fixing accessories, accessories set and cistern fittings complete all as specified and as directed. Make : Jaquar of cat no CNS-WHT-853P180SPPSM or equivalent model in CERA / PARRYWARE

S&F hand shower( Health faucet) with 1.00mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-565 or equivalent model in Kohler / CERA

M&L for vitreous China urinals URS-WHT-13253N of Jaquar with fixing accessories complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing auto closing concealed urinal flush valve PRS-CHR-073 of Jaquar, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F pillars cock Quarter turn with Extension body complete all as specified and as directed. Make : Jaquar Cat No OPP-15001PM or equivalent model in Kohler / CERA

S&F CP toilet paper holder confirming to CAT No ALD-CHR-1153S of "Jaquar" or Equivalent cat part from the makes as mentioned here in after, complete all as specified and directed.

S&F Soap dish confirming to CAT No ACN-WHM-1131N of "Jaquar" or Equivalent cat part from the makes as mentioned here in after, complete all as specified and directed.

S&F 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : Jaquar Product code FUS-CHR-29041 or Equivalent cat part from the makes as mentioned here in after, complete all as specified and directed.

S&F CP Bibcock with Wall Flange complete all as specified & directed. Make : Jaquar Product code OPP-15037PM or Equivalent cat part from the makes as mentioned here in after, complete all as specified and directed.

S&F Semi insert Counter top basin of Size 570x420x195mm complete all as specified & directed. Make : Jaquar Product code FLS-WHT-5601 or Equivalent cat part from the makes as mentioned here in after.

S&F Bottle trap (with internal Partition) 32mm size with 300 & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALE-CHR-773ML300x190 or Equivalent cat part from the makes as mentioned here in after.

S&F Stainless Steel 304 grade Silver finish curtain rod of 25 mm bore, medium weight complete all as specified & as directed. Make : Herrlich Homes or equivalent.

S&F Steel chrome finish alloy zinc solid jointless heavy Rod curtain bracket and bracket accessories suitable for door and window etc complete all as specified and as directed. Make : WKS Cat Part No S123-001, 1Incch or equivalent.

S&F Stainless Steel Nahani trap Square grating 5'' x 5'' with diameter of outlet 75mm. Ruhe 304 Grade Stainless Steel Product Code : 16-0307-15, complete all as specified and as directed.

S&F in repair 12mm thick toughened glass partitions with stainless steel supporting railing at top and other supporting clips / clamps, glass having frosted / film finish complete all as directed by Engr-in-charge.

S&F in repair 12mm thick toughened glass door, glass having frosted / film finish with stainless steel handle of 600mm (1 No.) , mounted on and including double action floor spring and other fixing accessories complete all as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded aggregate) as in precast cover slab for manholes septic tank cover etc including necessary form works and set in CM 1:6 complete all as directed by engr-in-charge

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 150mm bore of pipe, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for forming construction joints 30mm deep x 10mm wide, filled with 'A' grade sealing compound, complete all as specified and directed.

M&L for forming 12mm thick expension joints, preformed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A', thickness of slab 100mm, complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with 'A' grade sealing compound, complete all as specified and directed.

Excavation in soft / loose soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150mm internal dia of pipe, complete all as specified and directed.

S&F ceiling LED luminaries of size 600x600mm, 34-36 watts, 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver, three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make - HALONIX CAT NO HLFPR22-07-36-CWL-R or equivalent cat part in makes as mentioned here-in-after.

Taking down carefully existing unserviceable aluminium point wiring (light, fan, socket or power), complete fitting such as switches, ceiling rose, pendent, regulators etc removing material to store for keeping in safe custody or for taking on credit and making good the disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multi-stranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc., heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (a) One light point controlled by one, one way switch 5 Amps.

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board

(e) One bell point controlled by one, bell switch 5 Amps

All as per item No. 147 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multi-stranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multi-stranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

S & F for modular bell push modular 6 Amps single module, complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F Modular switch one way 6 Amps, 1 module, complete all as specified and directed.

S & F Modular switch one way 16 Amps, 1 module, with neon indicator, complete all as specified and directed.

S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked , complete all as specified and directed.

S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F Modular socket, 6 Amps, 2/3 pin combination 2 module, complete all as specified and directed.

S & F Modular socket, 6/16Amps, 2/3 pin combination 2 module, complete all as specified and directed.

S & F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and spd by engr in charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand complete all as specified and as directed.

S&F MCB DB,SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces, complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40-63 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC casing caping shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length.

Supply and fixing LED invertor batten 20Watt with 100 lumen /W ,6500k Model IVORA , Make Bajaj or equivalent makes as mentioned here-in-after, complete all as specified and directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps including removal old unserviceable T8 type light fitting complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 WH, Wipro Cat part No LL20-111-XXX-65-NE or equivalent makes as mentioned here-in-after.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. Make- Havells Cat part No -LHGLO6160099 or equivalent makes as mentioned here-in-after.

S & F for metal body exhaust fan, AC single phase, heavy duty, turbo force 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make - Bajaj Cat Part No -Maxma DX 8" or equivalent makes as mentioned here-in-after.

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth strip protected by galvanised iron 40 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing strip shall be encased in and including 50mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings etc. complete all as specified and as directed. Note :- (i) Unit rates includes the cost of 7.50 m GI pipe for protection of 4mm dia GI earth wire.

S&F industrial metal clad socket 2P+1N complete with metal clad 3 pin top and MCB SP 32A in sheet metal enclosure complete all as specified and directed.

Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated, complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all such as safety valve, thermostate, accessories NRV, connection piece etc, complete all as specified and directed.

M & L for copper tubing, confirming to relevant IS, of size 5/8 & 3/8" flare size or nearest size, 3 core 2.5sqmm copper cable, PVC drain pipe and insulation with superlon insulation to copper tubing as required length from indoor to outdoor unit of split AC complete as directed by Engineer in charge.

M/s.BAJRANG CONSTRUCTION

Suma Construction

N AND G CONSTRUCTION

Vastushilpa Contrustion