REPAIR/REPLACEMENT AND CLEANING OF WATER TANKS, REPAIR TO E/M INSTALLATIONS, PERIODICAL SERVICES TO OVERHEAD RESERVOIRS, DRAIN, FOOTPATH, SECURITY WALL/FENCING AND MISC B/R WORKS UNDER GE (ARMY) DHAR ROAD, UDHAMPUR

Amount

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 25mm, all as specified .

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified.

Refixing of old steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

Refixing old steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25 mm, all as specified.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes of capacity exceeding 250 ltrs and not exceeding 500 ltrs including by flushing out water, scrubbing with brushes cleaning with concentrated hydro chloric acid or caustic soda etc complete & finally washing with fresh water, including Marking or proper date of cleaning with white paint in 50mm of size of font with stencil over a coat of black paint complete all as spcified and directed by Engr-in-Charge.

All as per above item No 09 above but size exceeding 500 ltrs not exceeding 1000 ltrs

S&F in repair Rotational moulded polyethylene water storage tanks in white colour triple (cylindrical vertical with closed top) hoisted and fixed in position with tank cover threaded Triple Layer including Dismanteling of water tank all as specified in SSR Part-I of Capacity 500 litres all as specified Make Vectus/syntex/polycon .

S&F in repair Rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position with tank cover threaded Triple Layer including dismanteling of water tank all as specified in SSR Part-I of Capacity 1000 litres all as specified . Make Vectus/syntex/polycon

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Gun metal globe or gate valves high pressure with screwed for iron pipe or for unions of 15 mm bore and fixed in repairs, all as specified and directed

S&F in repair Gun metal globe or gate valves high pressure with screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete

M&L Cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in coping complete all as specified.

S&F bands, straps, supports or stays for holding water tanks and embeded in concrete of angle iron flat conforming to Fe-290 Gde-E-165 welding and embeding complete all as specified and directed.

S&F PVC Tank cover in repair of capacity 500 Ltrs to 1000 Ltrs with thread system and locking arrangement incl taking down old tank.

S&F in repair 20mm dia ball brass valves high pressure with poythene ball and flynut complete scwued iron pipes or brass ferrule and fixed

Removal of vegetations from roots etc on wall/Roof area n.exc 1.00 sqm each and making good the surface by grouting the holes and matching the plastered surfaces 15 mm thick in cement mortar (1:3) complete all as specified and directed.

Dismantling and breaking up drain pipes (salt glazed ware, AC or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.(with epoxy joint)

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified.(with epoxy joint)

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls etc with ms clamps with 30mm wide and 3mm thick incl dismantling of existing unsv pipes of any description and acessaries complete all as specified..(with epoxy joint)

S&F in repair PVC (SWR) bends suitable for 75 mm external dia complete all as specified.(with epoxy joint)

S&F PVC in repair (SWR) junction single, (single T) equal or unequal of 75mm dia.(with epoxy joint)

S&F in repair PVC (SWR) vent cowl of 110mm bore.(with epoxy joint)

S&F in repair PVC (SWR) vent cowl of 75mm bore.(with epoxy joint)

PVC pipes, 110 mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with ms clamps with 30mm wide and 3mm thick or under floors as SWR pipes, incl dismantling of existing unsv pipes of any description and acessaries complete all as specified..(with epoxy joint)

S&F PVC (SWR) bends suitable for 110 mm external dia complete all as specified.(with epoxy joint)

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia.(with epoxy joint)

S&F PVC (SWR) junction single, (double T) equal or unequal of 110mm dia.(with epoxy joint)

PVC (SWR) branch pieces single Y equal or un equal with access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe 75 mm size complete .(with epoxy joint)

Add to items No 28 for 75mm bore for provided with access door all as specified and directed

Add to items No 26 for 110mm bore for provided with access door all as specified and directed

Dismantling of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4)

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for rendering 15mm thick in CM 1:6 on brick/stone masonry surface finished even and fair with out using extra cement complete all as specified.

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )

Preparing new surfaces applying two coats of white wash on wall complete all as specified.

Preparing old/ new surfaces applying two coats of white wash on ceiling surfaces complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified

Preparing of old treated surfaces of wall and applying one coats of distempering oil emulsion (OBD), Note :- Rate including required / nessary wall care putty for close of nails hole and patches n.exc 1 sqm complete all as specified.

M&L for RCC (1:2:4) type B-1 using 20mm graded agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balxonies, canopies, deck slabs and in shelves and the like.

M&L Form work to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick in (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15mm thick in CM (1:4) for laying floor finishes complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick in vertical surface (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10 mm thick in CM (1:4) for laying floor finishes complete all as specified

M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15mm thick plasater in CM (1:4) for layingw wall finishes complete all as specified.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified.

Taking down top assembly complete (excepet curtains and guide channel of rolling shutter push or pull or manual type and re-fixing the same in same position after necessary repair such as cleaning, replacement of rusted nuts and bolts , including welding/grinding as required for proper and smooth function area of each shutter exc 5 sqm but not exc 10 sqm each complete all as specified and as directed.

S&F in repair steel ball bearing suitable for rolling shutter for smooth functioning of rollng shutter all as specified and as directed

S&F in repair GI pipe medium grade of 40 mm bore (nominal bore) as in suspension shaft for rolling shutter for smooth functionong cut to size inculding necessary drilling etc complete all as specified and directed.

S&F in repair steel spring suitable for mannually operated rolling shutters for smooth functioning complete all as specifed and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.

Precast RCC type B-1 (1:2:4), using 20 mm graded stone aggregates cover slabs for manholes, open drains etc. including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified.

Mild steel bars 6mm to 8mm dia (and flat iron where quered) ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips or welded to flat iron complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

M&L Preparing old plastered surface and applying two coats of cement base paint on external surface of wall dome / wall shaft, beams, column, facias ,chajja of over head reservoir tanks of any capacity and upto 50 mtr height in inculiding all necessary equipments, scffolding, safety equipment etc complete all as specified

M&L Preparing old plastered surface and applying two coats of white wash paint of internal surface of wall dome / wall shaft, beams ,column ,facia ,chajja of over head reservoir tanks of any capacity and upto 50 mtr height inculiding all necessary equipments, scffolding , safety equipment etc complete all as specified

M&L for two coats of exterior emulsion paint as in Column, chajja, fin, facia etc on new plastered surfaces including preparation of surfaces complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

Providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN).

S&F in repair hood for rolling shutters fabricated with 1 mm thick mild steel, haxagonal,square or circular shape including angle/bottom edge fixed over bracket plate with necessary fixture & fastners and including one shop coat of primer complete all as specified and as directed.

S&F in repair rolling shutter 1.25mm thick with out ball bearingas specified incl top cover and choring road hasp and staple and one shop coat of primer erected in position as including push pull and manuaaly complete all as specified and as directed.

S&F in repair rolling shutter 1.25mm thick with out ball bearingas specified incl top cover and choring road hasp and staple and one shop coat of primer erected in position as including Gear oprated type with beval gear box and crank handle complete all as specified and as directed.

S&F Non Asbestos cement bldg board 4mm thick fixed to MS frame work with screws as in ceiling specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete all as specified.

M&L for machine cut kota stone slab 15-16 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting invertical surface complete all as specified and as specified.

Taking down chowkats with shutters w/o taking off shutters from the frames n. exc 1.50 Sqm. Complete all as specified and directed.

All as per srl item No 78 above but exc 1.50 Sqm and n exc 4.00 Sqm

Taking downs shutter not exc 1 Sqm each complete all as specified and directed

Taking downs shutter exc 1 Sqm & n exc 2 Sqm each complete all as specified and directed

S&F factory made 35mm thick 2nd class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side sflush shutters 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F factory made 35mm thick 2nd class hard wood glazed/skeleton shutter open rebated and prepared to received glass, gauge etc with mullions (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part I

S & F 100mm long Hasp and staple mild steel wire type stove enameled black, including bolt to hinge plate and fixed with screws.

S&F Mild steel framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe-290 Gde E-165

Hacking out old broken glass panes size quality or description from metal frames incl punching or drilling out old glazing pins/ spring clips and providing and fixing new etc

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

All as per Srl Iten No 87 above but pin headed glass.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed

All as per item No 89 above but fixed in repairs

S&F MS butt hinges medium weight cold rolled mild steel 100mm

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, fixed type suitable to fix half portion wire cloth and half portion glass with suitable MS beading or flat or oil putty complete.

S&F for factory made solid panel PVC door shutter of 30mm thick consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site etc complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M/s Square Tube, supplying and fixing in opening as per specification and drawing.

M&L for applying one coat of synthetic enamel paint on old painted wooden surface exc 10cm width or girth all as specified incl preparation of surfaces

All as per item No 97 above but on steel surfaces

M&L for two coats of cement base paint on old plastered surfaces of wall over a coat of primer including preparation of surfaces complete.

M&L for one coats of cement base paint on old plastered surfaces of wall over including preparation of surfaces and including necessary patch repair with cement plaster 1:4 with appling two coat of cement base paint over including one coat of primer on repaired patch work complete. Note : Path work will be not exc 0.5 Sqm each

M&L preparation of old painted steel surfaces n.exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of new steel surfaces exc 10cm in width or girth and applying two coas of synthetic enamel paint over a coat of red oxide primer all as specified.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of Galvanised mild steel wire, staples or steel pins, complete all as specified.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Formwork to square/reactangular sides of pillars, posts, struts, piers, columns, beam and stanchions rough finished surfaces of concrete complete all as specified and directed

Mild steel TMT bars 5 to10mm dia in stirrups, spacers and binders etc and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for providing precast cement concrete louvres and jallies, Type B-0 (Using 12.5mm graded stone aggt), 40 mm thick, set in cement mortar 1:4, (measured solid), including all mouldingsand necessary taking down complete all as specified.

Brickwork straight or curved on plan exc 6m radius, built in CM(1:4) using bricks obtained from Ser Item No 39. Complete all as specified and directed.

PVC (SWR) pipes 110mm dia, Single socketed, in any length laid in trenches or in floors, weep holes complete all as specified and directed.

M&L for exterior 30x45 cm hi defination digital ceramic wall tiles in vertical surfaces like pillar of gates not less than 7mm thick set and jointed in neat cement slurry over 10mm thick plastering in CM 1:3 and pointed in white or coloured cement to match, size and colour / shade as directed by Engr-in-Charge.

Demolation of Cement concret Concrete of any description and in any position not otherwise specifically provided for

M&L for 60mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment of any pattern and including 25mm thick sand scushion all wall in rammred and leveled as approved by GE and as per manufacture Instruction complete all as specified.(Shape and size will be approved by GE)

M&L for 80mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment of any pattern as including 25mm thick sand cushion in rammared and leveled approved by GE and as per manufacture Instruction complete all as specified..(Shape and size will be approved by GE)

Factory made prepolished precast concrete designer tiles, ISI marked with grey grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed complete, all as specified.

M&L Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in surface channels and drains all as specified.

M&L for cement concrete of type E2 (1:5:10) using 40mm graded agg in foundation filling and mass complete all as specified as directed.

M&L for PCC 1:2:4 type B0, using 12.5mm graded agg as in kerbs or mud stops, rounded or chamfered on edges completed as specified.

M&L for pre cast cement concrete in kerb stone M-15, 1:2:4, type B-1, using 20mm graded stone agg with solid blocks of size 300x300x100 mm and setting with cement mortar (1:3) and pigments, complete as in kerbs or mud stops, rounded or chamfered on edges complete including excavation ,RFR and removal all as specified.

TARUN BUILDERS

DAVINDER SINGH