Chennimalai TP 15th Tied Grant 2022-2023 (2nd Installment)

Amount

Plastering with cement mortal 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Dadooing the walls with best approved quality colour glazed tiles of size 150 x 150 x 6mm set in CM 1:2 (One of cement and two of sand) 10mm thick and pointing with colour cement using 0.4kg per m2 neatly in all floors as directed etc., complete complying with standard specifications.

Floor finishing with Anti-skid Ceramic tilles of size 20cm x 20cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges. Etc. complete

Supply and fixing in position 22" Indian type Colour water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

Painting two coats ready mixed Approved Exteriar Emulsion of first quality and of approved colour over a priming coat including through scarbing clan removel of one coat of priming with best Cement paint as directed by the department officers etc complete and including necessary plaster of paris whever regd.(S.l.No.358)

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR Item no.264,P.No.65)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) [SD NO 20 ]

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. (SD 83)

Supply and run of 4 x 6 sq.mm.(56Nos/0.3mm.Dia) PVC insulated single core unsheathed copper conductor cable of 1100 V on 7/20 G.I. bearer wire for service connection mains (SD 68)

Supply and Run of 4 x 4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe ("B"class) suitable bend at both ends with necessary angle iron up right and end supports for mains.SD-73)

Supply and fixing of 4'40W twin box type fluorescent fittting complete with copper choke and condensor with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with fluorescent Tubes. SD-91

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 127

Supply and delivery and Fixing of HDPE tank 1000 Lts.Capacity As per Is 12701 / 1996 inculing loading , unloading, transportation cost and conveyance of all materials and all labour charges. etc., complete

S A PALANISAMY