Supply, instalation and commissioning of one (01) No. mini high mast lighting at Godhuri Guru Duara, under AMC.2nd Call

supply swaged and welded steel tubular poleof following sepcification as per IS-2317:1980 and dimensions 410-SP-33; 9.0mtrs: 164 Kg.

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5’) length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly Above 9.0 mtr. Size 0.6x0.6x1.91 mts.

Supply of PVC / SWA / PVC armoured cable of 1.1 KV grade to the work site of size 10 mm2 x 2 core of make Havells / Crystal / Gloster/ Polycab/Mescab. (Page K-10)

Laying one No Cable upto 35 Sq mm four core Aluminum armored in underground trench 460mm wide X 760 mm average depth with brick protection on the top of the cable with 8 Nos bricks per meter including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supply & laying of 50 mm dia, GI pipe (ISI Medium) for protection of cable, road/drain crossing etc.

Finishing of PVC cable end with crimping method including supply & fixing of solderless socket, anti corrosive paste & jointing materials.

Earthling with 80 mm dia G.I. pipe ( TATA medium) X 3.0 mtrs long and 1X 19/8 stranded G.I. hot dip wire 4.0 mtrs long, 25 mm dia X 150 mm long galvanized bolts, double nuts, double washers including socketing at both ends of stranded G.I. hot dip wire by crimping sockets/ thimbles and supplying , fixing 40 mm dia G.I. pipe (ISI medium) protection 3.00 mtr long to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 mtrs for morrum soil.

Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate alongwith suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Supplying and delivery of 200W LED fitting, new generation energy saving & environmental friendly long life verstalie pressure die cast alumunium IP66, road way luminarie with high power LED as per the detail technical proposal specification & vendor list attached (philips make) type (IP-65) BVP 483 LED 235 SWB PSU GR.