REPAIR/MAINT OF DRAIN, FENCING, FOOTPATH AND BOUNDARY WALL IN THE AREA OF AGE B/R-I UNDER GE WEST LUCKNOW

Amount

Dismantling fencing wire mesh, any type all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for providing RCC type B-1, 1:2:4 (20MM graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for tensing, average, sectional area exc 100 and not exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops completed all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line wire to be measured.

Restraining/resecuring including making good staplesgalvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line wire to be measured.

S & F Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10mm dia of neck, length of bolts exc. 5cm but not exc 10cm long complete all as specified and directed.

Supply only galvanised chain link fencing, any size, type of shape complete all as specified and directed. Note :- Weight of chain link fencing shall be ascertained by BOO to be ordered by GE.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc. including provn of galvanised mild steel binding wire of 0.9mm dia annealed complete all as specified and directed.

S&F in repairs concertina coil fencing with punched tape coil 600mm dia 10 mtr openable length (Total lenght 90 mrt) having 50 nos round per 6 meter with tape (0.52mm thick) and weight 43.478 gm/mtr and fixing the same on Y shaped angle iron placed 2 mtr apart and with 6 horizontal RBT (reinforced barbed tape) wire, stud tied with GI stapes sand GI clips to retain horizontal, including necessary bolts complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per above item No 13 but except bricks complete all as specified and directed. (Note: Old bricks obtained from demolition shall be reused)

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L cement concrete in type C-2, 1:3:6 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M & L for cement concrete (1:2:4), type B0 using 12.5mm graded stone aggregate as in benching ,haunching for drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel/ 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specifed and directed.

All as per above item No 20 but add or deduct for each 25mm girth or part thereof over or under 30 cm complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Cutting hole in brick walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required depth of embedded portion of hold fasts or Lugs measured from the face of the jamb in the wall exc. half brick but not exc. one brick complete all as specified and direced.

S & F framed work such as grills, gratings etc for portions framed and hung as gates, including pintle hinges, stops, hand made slidning bolts, etc, with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete including dismantling of mild steel work of any description all as specified and directed.

Taking down Iron/steel door shutters, side hung exc 1.5 sqm and not exc 5 sqm and refixing in same opening after repairing including welding and necessary jointing cleats screws etc fittings such as hinges complete all as specified and directed.

Supply and fixing in repair 1.0mm thick PVC plain (colour as specified by Engr-in-charge) sheet including taking down old one in hearth covering to framed steel/iron doors/gates and in partition walls, etc cut to size edges beaded if directed holes punched including round headed screws clout nails or rivets and fixed to seel members complete all as specified and directed.

Supply and fixing in repairs 1.0mm thick mild steel plain black sheet in hearth covering to door shutters covering to door chawkhats (frames) chullahoods, watertanks, water troughs, ducts, urinal troughs and funnel etc cut to size edges beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded / riveted seams including bending , turning up, mitread angles stooped ends outlets etcas required complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L for Precast RCC 1: 2:4, type B1 (nominal mix ) using 20mm graded stone aggregates as in cover slab etc complete all as specifide and directed.

Material and Labour 10mm dia mild steel TMT bar, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Material and Labour 6 to 8 mm dia mild steel TMT bar, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Demolition of PCC in ground floor and paving not exc 15cm thick below or above ground level complete all as specified and directed.

M & L for 40mm thick cement concrete 1:2:4, Type B-0 using 12.5 mm graded stone aggregate as in floors, finished even and smooth using extra cement complete all as specified and directed.

M & L for 38mm wide of glass dividing strips, 3mm thick and inserted in position to confirm design of flooring. all as specified and directed.

M & L for 75 mm thick cement concrete type C1(1:3:6) using 20mm graded stone aggrtegate as in plinth protection including finishing even & fair complete all as specified directed.

Dismantling of reinforced cement concrete precast louvres and Jallies any type complete all as specified and directed.

M & L for Providing 35 mm thick precast RCC Louvres and Jallies type B0 (1:2:4) using 12.5mm graded stone aggregate complete all as specified and directed.

Dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed.

M&L for 60mm thick rubber moulded glossy finish coloured interlocking precast PCC pavers any colour of M-35 grade laid over 25mm th sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc complete all as specified and directed.

M & L for 300x300x10-12mm thick Exterior grade cement concrete tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles coloured glossy finish rubber moulded with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L Glass coping with broken glass @ 14 Kg/Square meter fixed in and including 20 mm thick cement mortar (1 : 3) complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

Material and Labour for preparation of old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.

Material and Labur for preparation of newly plastered surfaces of wall and applying three coats of White washing complete all as specified and directed.

M & L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

Preparation of old external treated surface of concrete/kerb stone surfaces, facias, cornices etc by removing all scale, loose material dust etc & applying one coat of weather proof anti-fungal (Exterior Emulsion) paint over a coat of 1mm thick putty over a coat of primer applied as per manufacturer instruction complete all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of steel surface of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

JITENDRA SINGH

M/s Inder Kumar

M/S SWATI CONSTRUCTION

M/S Reliance Construction

EVEREST CONSTRUCTION

M/S SHIVA CONSTRUCTION

QUALITY CONSTRUCTIONS CO

ANIL CONSTRUCTION

M/S Dwivedi Construction Coy