REPAIR TO ROOFING ,FLOORING,PLASTERING ,SANITARY FITTINGS,PLUMBING AND OTHER MISC B/R WORKS AND REPAIR/REPLACEMENT OF ELECTRICAL WORKS IN DAD RESIDENTIAL BUILDINGS AT JAK LI REGT ENTRE,SRINAGAR UNDER GE 970 EWS

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete, all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350 x250x7 mm 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles laid over 10 mm rendering on fair faces of brick work or concrete surface in cement mortar 1:3 to receive tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms/WHB drain tub and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand filling 25 mm thick for sand cushioning for laying of interlocking paver blocks under floors/path after watering and consolidation as required including 100mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors incl complete all as specified and directed.

Use and waste ormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for RCC Type B1,1:2:4 using (20 mm graded agg) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like incl demolition of cement concrete in reinforced( reinforced cut as required to facilitate demolition) roofs, floors beams ,stair cases,landings,chajjaas and similar suspended work complete all as specified and directed .

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, incl dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge

M&L For framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,incl dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws,incl dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed .

M & L brickwork with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1.4) incl demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , Hiking for key ,scrubbing down with water completer all as specified

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces ion cement mortar 1:4 finishing the surface even and smooth ( without using extra cement) in two layers with WPC complete all as specified.(WPC paid separately )

M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement morar 1:6 finishing the surface even and smooth ( without using extra cement complete all as specified and as directed.

M&L for Rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound compete all as specified.

M&L for preparation of new plaster surface of wall and applying 3mm thick of wall putty, complete all as specified and directed.

M&L for preparation to new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed .

M&L for preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed .

M&L for preparation of new plastered surfaces of ceiling and applying three coats of oil bound distemper complete all as specified and directed.

S&F 20 mm outer dia pipe of bore 3-layer PP-R P o l y p r o p y l e n erandom copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc.,incl taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 25 mm outer dia pipe of bore 3-layer PP-R P o l y p r o p y l e n erandom copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc.,incl taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed .

S&F Rotational moulded PVC water tanks of 500 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including, incl dismantling existing water tank n exc 500 ltr and removing from site including necessary connected accessories, complete all as specified and directed by Engr-in-charge

Cleaning and removing all scale and dirt, etc, from PVC water tanks n exc 500 Ltrs capacity from mouths of circulating pipes,including refixing with necessary fittings complete all as specified and directed by Engr-in-charge

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight- 455 gms) complete all as specified and directed.

S&F in repair vitreous china water closet Pedestal pattern pan and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. including PVC valveless syphonic action type flushing cistern trap, incl 10 Ltr capacity PVC flushing cister & flush pipe and anti-syphonage pipe incl jet sprey with 15 mm dia, 1 mtr long flaxible tube fixed, complete all as specified and directed by Engr-in-charge

S&F in repairs vitreous china wash basin (Padestal pattern), white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling, complete all as specified and directed by Engr-in-charge

S&F in repairs 15 mm dia CP sower rose, with or without swivel joints any size incl fixing to steel pipes or unions etc, complete all as specified and directed .

S&F in repairs 20 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F in repair 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed .

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repair chromium plated fancy type mixer for mixing hot & cold water for WHB 15 mm dia screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated fancy type wall mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated fancy type Sink mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 40 mm bore waste coupling, complete all as specified and directed .

S&F in repair plate rack 1 mm thick stainless steel sheet of size 600x900mm fixed with washer complete all as specified and directed

S&F in repairs for 75/100 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementt, complete all as specified and directed .

S&F in repair Low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

Taking up or down 100mm bore of CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe, complete all as specified and directed .

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.

Ditto- all as per item no.96 above but 75mm bore pipe, complete all as specified and directed .

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.

Ditto- all as per item No 45 above but 75mm bore pipe, complete all as specified and directed by Engr-in-charge.

S&F PVC bends (any radius) of 110mm dia.

S&F PVC bends (any radius) of 75mm dia.

S&F PVC cowls of 75mm dia.

S&F PVC cowls of 110mm dia.

M & L for Disconnecting and taking down exhaust fan and blades any size or sweep after dismantling and removal to trade workshop for repair, complete all as specified and directed.

M & L for strip opening and cutting of old burnt copper winding of exhaust fan and rewinding of exhaust fan motor of any sweep with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, re-assembling, testing and connecting for satisfactory run, complete all as specified and directed.

M & L for Ball bearing of exhaust fan of any size/make as per the existing, complete all as specified and directed.

M & L for servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.

Supply and fiixing of Heating element for geyser of cap 1.5KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed.

Supply and fiixing thermostat for Geyser of capacity 25/50/100 ltr (long size) with temperature setting adjustment range from 40 to 85°C, ISI Marked, complete all as specified and directed.

Supply and fiixing Geyser Syphon Assembly Set suitable for 25 ltr capacity geyser, fixed in replacement, complete all as specified and directed.

S & F Rubber gasket for water heater storage type of any capacity fixed, in replacement and suitable as per the existing, complete all as specified and directed

Taking down old unserviceable plug top from geyser connection and Supply and Fixing in replacement plug top 15/16 Amps for Geyser, complete all as specified and directed.

Supply and replacement of safety valve for geyser of 25/35/50 litre capacity, complete all as specified and directed

Supply and replacement of non return valve 15mm dia for geyser of 25/50 litre capacity, complete all as specified and directed.

Supply and replacement of heavy duty PVC connector 600mm long 15mm dia with PTMT nut for geyser of 25/50 litre capacity, complete all as specified and directed.

M & L for disconnecting and taking out geyser of capacity 25 litre and replacement of copper/SS inner tank and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.

S & F in Energy efficient LED street Light Luminaire 35 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded from LT over head line / junction box to the connector of fitting, complete all as specified.

S & F in repairs of tube light fitting 1x 22 watts 4 feet with LED batten with aluminium housing and integrated electronic driver in cluding LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed.

Supply and fixing in replacement of switch socket Combination piano type 15 Amp, flush type , ISI marked Complete all as specified and directed.

Supply and fix Capacitor of of 2.5 MFD for ceiling fan, complete all as specified and directed.

Please Enable Macros to View BoQ information