CO PWD Colony Type V Qtrs. At Nabha under ESD.I SH Providing E.I there PWD colony 4 No. sets parking lift.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole. Cat-A.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

8 way , Double door

6 way , Double door

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 50/63 A 'C' curve

Supplying and fixing following way, CRCA sheet steel enclosure, IP 30 - Metal Door, RAL9003, powder coated, suitable for surface and flush mounting, with provision to mount MCB/Isolator/RCCB/RCBO and other modular devices, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator etc.)

MCB Enclosure 2/3 or 4 way

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 10W

LED Batten Light 20W

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make

Square/round LED Panel Light 6/7W Surface

Square/round LED Panel Light 10/12W Surface

Square/round LED Panel Light 15W Surface

Square/round LED Panel Light 18/20W Surface

Square/round LED Panel Light 24W Surface

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

10 Liter capacity water heater (Cat-A)

25 Liter capacity water heater (Cat-A)

Supplying and fixing fancy Pendent type light with single lamp holder of superior quality & make complete with all accessories/Chain etc. as required complete with holder including connections etc. as required:-

Supplying and fixing fancy Pendent type light with three lamp holder of superior quality & make complete with all accessories/Chain etc. as required complete with holder including connections etc. as required:-

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Armoured cable 120 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips,Syska, GE, Crompton, Bajaj, C&S, Panasonic, Surya, Havell's or any other approved by Engineer-in-Charge.

LED Bulb 7/9 watt

Supplying and fixing electrical switch board, having 3 No. of 5 amp. modular switches and socket on suitable size of modular G.I box of 205mm X78 mm X 50 mm deep ( nominal size) on surface or in recess with suitable size modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection, painting etc.as req. (For light plugs)

Supplying and fixing of bulk head fitting of all sizes and shapes, complete with all accessories but excluding LED fitting including making connections, testing etc. as required.Make: ,Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.,

Bulk head LED fitting 9 watt

Providing and installation of Light duty, plastic body, ventilating fan of following sizes in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havell's, Bajaj, Crompton Greaves, Usha, Kahitan etc.

Ventilating Fan, Light duty, (Plastic body) 200 mm

Providing and fixing following rating and breaking capacity 3-Pole MCCB 63 Amp THERMAL RELEASE HAVING (O/L & S/C) PROTECTION WITH SPREADER TERMINAL & ROH, in the existing cubical panel board including drilling holes in the cubical panel, making connections, etc. as required. Make: L&T, Schneider, Siemens, ABB, C&S etc.

63A 3-Pole MCCB

Providing and fixing Size II Enclosure suitable for DU / DH MCCBs, 63A 3-Pole etc. as required. Make: L&T, Schneider, Siemens, ABB, Legrand, C&S etc.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical sub L.T Panel. The Panel shall be compartmentalized type having space and Arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall beFabrication in 1.6MM. CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. . Aluminium E-91 Grade Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt,Washer ,Hardware etc.125A. Aluminium E-91 Grade Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt,Washer ,Hardware etc. Approximate size of panel . All busbar links,copper solid/ copper flexible wire interconnection busbar to MCCB/MCB to field side for cable termination shall be covered/ insulated with heat shrinkable sleeves of coloured coated Red, Yellow, Blue& Black. Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. & labour etc, gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,as per specification.The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

Outging :-MCCB 63A 3P 25KA TMR With O/L & S/C Protection To Lift (1 No.),Spreader Terminal MCCB 63A 3P (1 No.), Space for KWH Meter Single Phase(8 No.),Space for KWH Meter Three Phase (2 No.), Backalite Sheet 6MM for KWH Meter Fixing (10 No.)

Fabrication/Painting & Assembly

Fabrication charges of cubical type,Indoor type, Single door, Wall mounted, fixed type, free standing single front, dust proof & compartmentalized Distribution Board made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specification

Assembly Charges of 200A 4Strip Aluminium Busbar (Horizontal/ Vertical) & Earth strud (current density of Aluminium Busbar shall be 1mmx1mm=1.00 Amp.) Aluminium shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembly Charges of Aluminium solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables

Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc.

Assembly Charges of Accessories like Gasket, Doorlocks, Total Above Job Mention Copper flexible door earth, legend plates etc.

Kumar Enterprises

MANOJ KUMAR BANSAL

Sharma and Company

Kalra Hardware and Electric Store