Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.2 L
Closing Date
18 Aug 2026, 3:00 pm
Improvement to passenger amenities at JKNI Halt station, Major improvement work like extension of PF no.2, water supply pipeline and sanitation & Provision of RCC OHT (50000 Gallon) with 01 no. deep tube well (900') etc. at SDDN in LJN Division, Major improvement work like raising of PF no.2, Existing PP shelter, Provision of RCC OHT (50000 Gallon) with 01 no. deep tube well (900'), Imp. of toilet water supply, pipeline and sanitation at BLP in LJN Division, Proposed dismantling & extension of existing foot over bridge from platform No. 02 to platform No. 01 at Lucknow City station of Lucknow Division, Development of Goods platform surface ,fencing etc. at PD & approach road widening etc. at BKT , S&T Work in connection with Provision of New PP Shelter at PF no. 2, 3, 4 & 5 due to existing infringement of SOD in old PP Shelter and providing galvanized sheet PF No. 1 & 6 of LJN Station in section of SSE/W/LJN. Provision of Telecom facilities for 2nd entry gate (South side) at SDDN in LJN Division. Improvement of platform surface on PF no. 1 to 6 with improvement of Concourse Area, Passenger Hall, waiting hall and water supply pipeline, Toilets and circulating area at LJN station.
56of2026
56of2026
Open
Works - General
180 Days
Lucknow, Uttar Pradesh
₹0
₹3.2 L
22 Jul 2026
22 Jul 2026
4 Aug 2026
A-Telecomm(Supply & Execution)
Supply of single sided digital clock Suitable for Office Complex with GPS Synchronization in Standalone Mode (Color of LED: Amber) as per RDSO Specifications RDSO/SPN/TC 62 2008 Revision 4.1 or latest. Inspection: Consignee Above/
Supply and laying screened wire twin core(24/76 copper conductors) PVC insulated cable for connecting loudspeakers with GI support wire for connecting loud speakers (PVC channels / PVC conduit pipews/GI wire required for carrying the screened PVC cable shall be supplied and fixed by the contractor, however GI pipe for road crossing shall be supplied by the railway, if required any where. Inspection: Consignee Above/
Supply and installation of Solid state Amplifier with minimum specification as 400 W power output, =<2dB output regulation,50-15000Hz frequency response, SN ratio 60dB,Tone control- Bass,Treble, Outputs-Preamble 200 mV/600 Ohm, line1V/1K Ohm, Speaker output- 4 Ohm, 8 Ohm,70V & 100V for each zone along with one small stand. Inspection: Consignee Above/
Supply, Installation of column speaker with line matching transformer complete & , 4 fixing in the shaded/ unsheded area with suitable iron plates for hanging and fixing of the speakersas per direction of Rly's Engineer.Supply and cutting of iron plates,fixing of plates to the angle of Railpole/GI pipes with nuts and boltswill be done by the contractorsNote: All the required materials including iron plates/angles for installation the speakers to besupplied by the contractors.As per item no 1 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply of 30 watts Industrial Horn speaker with 5,10,15,20,25 watt tappings, matching transformer and driver unit.As per item no 2 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply and Installation of Dynamic microphone with flexible goose neck and ON/OFF switch provided with 6 meters mic lead along with suitable connectors. As per item no 3 of technical Specification attached Schedule) Inspection: Consignee Above/
Supply and fixing of PVC conduit pipe 25 mm with accessories such as bend,tee, coupling, elbow,saddle, clamp, screw, PVC/wooden plugs etc. on walls,angle or on rail of platform 7 shelter etc. at an interval of 1 mtr. MS clamp made of 3 mm MS flat to be manufactured and supplied and fixed to clamp the PVC pipe or angle/ rail run of platform shelter. The clamp should be painted with red oxide primer over which two coats of aluminium paint to be given. Where ever necessary jumper holes to be made in wall and above PVC pipe threaded and wall to be repaired to its original condition. . All the fixing material required shall be supplied by the contractor. Inspection: Consignee Above/
SITC of GPS Based double face platform Digital clock as per RDSO Spec No. RDSO/SPN/TC /62 /2008 Rev 3.0 or latest With LED of Blue/Red/White Colour and Size Approx. 762x381x228 mm it also include all fitting Arrangement. (Colour to be decided by the Railway) Inspection: Consignee Above/
Supply of STP (Shielded twisted pair) CAT-6 Cable as per EIA/TIA-568-B Specification or latest. Inspection: Consignee Above/
Supply of power cable 3 Core, 2.5 Sq mm, multi strand (36/0.3mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for railway electrification area, shall be of reputed make. Inspection: Consignee Above/
Supply, installation, testing and commissioning of 2 KVA on line UPS 120 Minutes backup with suitable battery stand as per specification attached.As per item no 4 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply & Testing of high speed LAN extender 30 mbps 2/4 wire. As per item no 5 of technical Specification attached Schedule) Inspection: RITES Above/
"Supply of 2 Mbps leased line modem as per specification no. RDSO/SPN/TC/80/2020 Rev. 2.0 or latest each pair consisting of one G-703 & V-35 unit. Inspection: Consignee" Above/
Dismantling/Raising/Reinstallation of CGDB Pole with Reinstallation of CGDB Board in open area.As per item no 6 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site.As per item no 7 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply of 40/33 mm outer dia/inner dia . PLB HDPE duct as per RDSO Spec. No.RDSO/SPN/TC/45/2013, Rev 2.0 or latest with all accessories like end caps, collars, bends,couplers etc. Inspection: Consignee Above/
Laying of PLB HDPE pipe in trench/open space, fixing and clamping of HDPE pipe on wall or structure and sealing of the duct after laying with proper fixing material. All the accessories like couplers, end caps/plugs to be provided by the contractor within the same cost and its protective work as per directionof site engineer. Inspection: Consignee Above/
Laying and drawing of data/OFC /Power cable through PVC Pipe,Casing Capping & conduit Pipe as per Instruction of Engineer Incharge.As per item no 8 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply & installation of wall mounted 6U networking rack having power distributiion board Fan,cable manager and front lockable door with glass.As per item no 9 of technical Specification attached Schedule A( Telecom) Inspection: Consignee Above/
Supply OFC single mode 6 fiber armoured cable Specification No.IRS:TC55-2006 Rev.1 or latest. Inspection: Consignee Above/
Cutting of all types of platforms/road crossing and trenching and excavation to width 21 and depth of 300 mm x 300 mm , laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it after wards as per original condition. Inhard rocky ground area, cables will be laid normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench. The cutting to be filled and finished with cement/concrete as per theRDSO drawing no.SDO/Cable laying/008,issued vide RDSO document no.RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. Inspection: Consignee Above/
Supply of UTP CAT - 6 cable,having bare Copper Conductor of dia meter 0.5 mm, Suitable for Gigabit Ethernet . Inspection: Consignee Above/
Supply ,laying, testing & commissioning of twin core screened cable 0.9 Sq. mm annealed tinned copper conductor confirming to IS-694/90 . Inspection: Consignee Above/
Supply, installation and commissioning of maintenance free earthing system which consists of supply of earthing kit 1 set consisting of (1) Earth electrodes of copper clad steel alloy of min.10 feet (3 meter) long,17 mm dia and copper thickness of 250 microns-01 No. (2)RDSO 24 approved Earth enhancing compound in3 0 Kg. pack - 01 No. (3)Copper tape of 25 mm X6 mm X 150 mm with 99 % purity-02 Nos. and another of 25 mm X6 mm X 300 mm to terminate on earth electrode. (4) This include supply of 35 sq mm/ 16 sq mm/10 sq mm multi strand single core PVC insulated copper cableas per IS:694 for connecting Main Earth Electrode to the Equipment. The Earthing material shall be supplied as per RDSO specification RDSO/ SPN/ 197/ 2014 Ver. 1.0 or latest.As per Technical Specification attached Schedule A( Telecom) item no. 10 .Inspection: RDSO for supply, Consignee for installation Above/
Supply and Installation PA Wall Speaker with Volume control.As per Technical Specification attached Schedule A( Telecom) item no. 11 Inspection: Consignee Above/
Supply & Installation of layer-2 switch (minimum 8 +2 manageable ) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 base X SM SFT port with optical modules complete with all accessories etc. as per RDSO specification no. RDSO/SPN/ TC/65/2021version-6 or latest Inspection: Consignee Above/
Supply of STP/UTP RJ-45 Connectors as per site requirement. Inspection: Consignee Above/
Supply of SFP Optical / Electrical 1 Gbps or 100/1000 Mbps Electrical as required.As per Technical Specification attached Schedule A( Telecom) item no. 12 .Inspection: Consignee Above/
Supply of OFC patch cord cable (10 m long with APC/FC/LC/SC/-SC/LC/FC/APC or as per site requirenment connector Patch cord). Inspection: Consignee Above/
Supply of 12 port loaded LIU rack mountable, LIU should be provided for terminating 30 the optical fiber cables. It shall provide minimum bending radius and splice trays shall function as a splice cover for Pigtail Splicing. Cable gland sshall be provided for secure anchoring of incoming cables. Rubber grommets shall be provided at the cable entry point fortight sealing. The splice tray should be made of ABS materials, or better.As per Technical Specification attached Schedule A( Telecom) item no. 13 .Inspection: Consignee Above/
Installation, Testing & Commissioning of rack mountable 12 port Loaded LIU. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Inspection: Consignee Above/
Supply, installation, testing and commissioning of Media Converter fiber to Ethernet 100 base T Signal mode fiber with all required accessories including AC 230 V to DC Power adapter, as per Clause No. 16 of RDSO Spec. RDSO/SPN/TC/65/2016 (Rev.4.0) or latest. Inspection: Consignee Above/
Supply, Installation, Testing & Commissioning of 5 KVA On Line UPS with isolation transformer as per RDSO spec no. RDSO/PE/SPEC/0023-2001(rev 0.0) amnd 2.0 or latest suitable for single phase AC input & single phase AC output,floor mounted type backup time 120 minutes. This also includes supply of one battery rack and one set (for input and output) compatible MCBs complete with cover & fixing materials. Inspection: Consignee Above/
Supply of 19" 6U Rack with all accessories like Electrical fitting, Fan tray, Patch Panel, cable manager, spike buster for housing IP storage unit. Inspection: Consignee Above/
Supply, installation and commissioning of Router [02 x 10/100/1000 LAN +08 x02 Mbps [V.35] WAN +08 x 02 Mbps [G.703]Ports; 300 kbps] as per RDSO specification no.RDSO/ SPN/ TC/ 84/2008,Rev. 0.0 or latest. Inspection: Consignee Above/
Supply and fixing of PVC casing caping of size 1" as per instruction of consignee and officer incharge. Inspection: Consignee Above/
"Supply and installation of FDMS and termination of IN and OUT 24 fibre SC type OFC cables as per GR No G/FDM-01/02 April-2007 of TEC or latest. [with all connecting materials] routing/dressing fibres as per direction of engineer/incharge. this work includes testing of fibres in the section/block. As per Technical Specification attached Schedule A( Telecom) item no. 14 Inspection: Consignee" Above/
Supply of Power Board (3 No's 5 Amp & 1 No. 15 Amp socket total -4 points) Inspection: Consignee Above/
Horizontal direction drilling (HDD)/Trenchless digging/machine drilling without damage to surface road /track for laying/insertion of DWC/GI/HDPE pipe. The bore shall be done of 39 min. diameter 120 mm & at the depth of minimum 1400 mm from the ground level.The ground level shall be considered ignoring the bank height of the bank of the road/ track. Note:- DWC/HDPE/GI Pipe supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cables shall be laid cautiously so that these should not get damage due to rough handling & pressure on cable. Payment of boring shall be made only after laying of DWC/HDPE/GI pipein the bore. Inspection: Consignee Above/
Supply of 24 fibre armoured ofc cable conforming to specification no. irs-tc- 55/2006(ver1) amdt3 with latest amendment . Inspection: Consignee Above/
Excavation /Trenching on pucca road/Plateform upto depth of 1.20 mtr. & 30 cm. 41 wide and refilling with soil including levelling of trenches and repairing to the original condition . The responsibility of obtaining permission from civil authorities like - Municipality. PWD, Forest etc.rest with tenderer (All the materials required for repairing of road / platform shall be supplied by the contractor).As per Technical Specification attached Schedule A( Telecom) item no. 15 .Inspection: Consignee Above/
Excavation/trenching of cable trench of 1.20 mtr depth and 30 cm width in all kind of soil ,back refilling after laying of 6 Quad cable /OFC at 1.20 meter depth ramming & I consolidation of soil in trenches as well as disposal of soil if any.This includes all preventive works & all material supplied by contractor if required .As per Technical Specification attached Schedule A( Telecom) item no. 15 .Inspection: Consignee Above/
Laying of 6 QUAD Cable /PIJF Cable/Signalling Cable of different sizes as per cable route plan approved by Railway. The cable Laying includes Laying of cable in trenches, through pipes etc.As per Technical Specification attached Schedule A( Telecom) item no. 15 .Inspection: Consignee Above/
Dismantling/Reinstallation/Commissioning of CGDB board on angle in covered area.As per Technical Specification attached Schedule A( Telecom) item no. 16 .Inspection: Consignee Above/
Dismantling/Reinstallation/Commisssioning of camera with Reinstallation of CCTV camera As per Technical Specification attached Schedule A( Telecom) item no. 17 .Inspection: Consignee Above/
Dismantling/Reinstallation & commissioning of SLDB Board As per Technical Specification attached Schedule A( Telecom) item no. 18 .Inspection: Consignee Above/
Installation, Testing & Commissioning of 19" 6U Rack. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Inspection: Consignee Above/
Supply of 2 core screened/shielded multi strand PVC insulated wire (24/0.2 mm dia) for speaker load line. Inspection: Consignee Above/
Supply of networking Gigabit switch 24 port POE+ having 4 Uplink fiber ports Min. Switching capacity 128 Gbps.As per Technical Specification attached Schedule A( Telecom) item no. 19 .Inspection: Consignee Above/
Cutting of the platform with tile/rockcutting machine or manually to 30cm depth and 12 cm width approximately(includes cutting of tiles neatly if provided) by removing slabs/tiles if anyand laying of catches/pipe as supplied by railways and refilling the trench after laying of HDPE pipe and repairing the platforms as existing shape.Platform/paccka area only cutting with marble cutting machine. Inspection: Consignee Above/
Supply of data communication cable and pvc pipe as per technical specification .As per Technical Specification attached Schedule A( Telecom) item no. 20 .Inspection- RITES Above/
Supply of LED matrix board with Red SMD LED competable for LJN stationAs per Technical Specification attached Schedule A( Telecom) item no. 21 .Inspection: Consignee Above/
PDC Daughter Card for LJN stationAs per Technical Specification attached Schedule A( Telecom) item no. 22 .Inspection: Consignee Above/
Supply of Controller card for Coach Guidance Display Board for LJN station As per Technical Specification attached Schedule A( Telecom) item no. 23 . Inspection: Consignee Above/
Supply of Controller card for PFD for LJN stationAs per Technical Specification attached Schedule A( Telecom) item no. 24 Inspection: Consignee Above/
Supply and installation of 4 port Router for Tier-3 locations loaded with (02x10/100/1000Mbps LAN Ports, 4ports- 2 Mbps V. 35 WAN Ports along with 4nos of V.35 DTE cables cables as per RDSO Specification No. RDSO/ SPN/ TC/84 /2008 Rev 0.0 or latest. Inspection: Consignee Above/
Supply & Testing of 4 port Ethernet LAN Extender As per Technical Specification attached Schedule A( Telecom) item no. 25 .Inspection: Consignee Above/
Supply, Installation, Testing & Commissioning of Professional LargeFormat LED Video Display Unit, 55"(inches) or larger, Full HD 1920 x 1080,Brightness: 350 cd/m, contrast ratio1100:1, HDMI & DVI port, Including wall mount kit. as per clause no. 9.0 of RDSO/SPN/TC/65/2021 Rev. 6.0 or latest . Inspection: RITES Above/
Work pertaining to Horizontal Direction drilling ( HDD) Boring and trenchless cabling .It includes supply,transportation and insertion of self lubricated HDPE pipe and laying of cables in boring under the track/road by using self lubricatedHDPE pipe 50 mm inner dia and 63mm outer dia in the bore and the laying of cables in the bore under the track/road .The depth of horizental boring should be minimum 1.2 metre from rail flenge/road level. Inspection: Consignee Above/
Supply of single mode single fibre optical media converter supports wavelength division multiplexing (WDM) upto 20 KM, wavelength supported 1310 & 1550 nm, 10/100/1000(Giga)RJ-45. Inspection: Consignee Above/
Supply and installation of OFC patch cord 2 mtr long (SC- SC/SC-LC) as per site requirement Inspection: Consignee Above/
Supply, installation, testing, wiring & commissioning of Layer-2 managed Switch (24 ports 10/100/1000 BASE-Tports, 4x 1G SFP+ ports) as per RDSO Specification No RDSO/SPN/TC/65/2021Version 6.0 or latest Inspection: Consignee Above/
Supply of 14 inch LCD/ LED based UTS-PRS [Universal] fare repeater with fare facility of QR code display.As per Technical Specification attached Schedule A( Telecom) item no. 26 .Inspection: Consignee Above/
Supply and installation of 19" 42 U Rack with all accessories like Electrical fitting,Fan tray, Patch Panel, cable manager,SPD for housing IP storage unit. All the fixing material shall be provided by the contractor. Installation as per instructions of officer incharge Inspection: Consignee Above/
Supply of Terminal Server( TS), with 16 Terminal ports with 1500 V AC isolation on each terminal port ,each unit supplied one AC power cord & one user manual, & specificationAs per Technical Specification attached item no. 27 Inspection: Consignee Above/
Supply of 63 mm HDPE pipe outer dia. It Shall comply with TEC/GR/FA/CDS- 008/04/AUG-19 (TEC72030:2019) with latest amendments Version with all required accessories. Inspection: Consignee Above/
Supply and Installation of PA Wall speakerAs per Technical Specification attached Schedule A( Telecom) item no. 28 .Inspection: Consignee Above/
Supply and installation of stand alone indoor wireless access point.As per Technical Specification attached Schedule A( Telecom) item no. 29 .Inspection- RDSO for supply, Consignee for installation. Inspection: Consignee Above/
Supply, Installation, Testing and Commissioning of Full HD Fixed Bullet type IP Color Camera along with128 GB or Higher SD Card,housing and mount and all accessories required for installation purposes as per RDSO Spec No RDSO/SPN/TC/65/2021,Rev 6.0 or latest. Inspection: Consignee Above/
Supply of Optical Fiber Loss Test set, 01 Set Consist 02 items. (01)560XL optical power meter with 1030 ST-PC Fibre optics connector adaptor (02)570XL-ST 850-1300 nm LED source with built in ST-PC connector interface As per Technical Specification attached Schedule A( Telecom) item no. 30 Inspection: Consignee Above/
Supply of OFC Joint closure (TEC specification No. TEC/GR/ TX /OJC-002/03/APR 2010. & RDSO Spec.RDSO/SPN/ TC/68/ 2014 Revision 1.0) along with latest amendment & making straight through joint for 24 fibre cable & end testing. This includes splicing & making pits etc. and work will be done as per technical supplement.As per Technical Specification attached Schedule A( Telecom) item no. 31 . Inspection: Consignee
B-Signal( Supply & Execution)
PVC insulated wire 16/0.2 mm flaxleble cord copper conductor,sihgle core nomonal area of cross section 0.5mm2 to IRS:S:76/89 AMENDEMENT-3 colour as specified in coil 100meters, 650/1100 volt grade. Inspection: Consignee & Officer Incharge of the work Above/
Fitting of LED Signal with all acessories and its wiring as per direction of site Engineer. All Material required for fitting and wiring except LED Signal aspect and pvc wire shall be supplied by the contractor as per item no. 1 of Schedule B-Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Excavation and Casting of Apparatus Case Single foundation in Casting ratio 1:3:6 3 with contractor's own materials includin gcement and galvanized anchor bolts of standard size. The required scaf folding Ferma etc for Casting of Casting foundation will have to be brought by the contractor at his own cost. The item also includes additional masonry work as well as earth work if required on bank where there will be possibilities of foundation sinked, fallen ortilted. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. as per item no. 2 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Excavation and Casting of Apparatus Case Half foundation in Casting ratio 1:3:6 with 4 contractor's own materials includin gcement and galvanized anchor bolts of standard size. The required scaf folding Ferma etc for Casting of Casting foundation will have to be brought by the contractor at his own cost. The item also includes additional masonry work as well as earth work if required on bank where there will be possibilities of foundation sinked, fallen ortilted. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. as per item no. 2 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply of Earthing material and provision of Earthing as per RDSO (Conventional earthing) as per item no. 3 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply and fixing of MS Flat of size 32mmX5mm as earth lead on location boxes and interlocked lc gate. All required materila will be supplied by the contractor. Inspection: Consignee & Officer Incharge of the work. Above/
Termination of Signalling Cable as per item no. 4 of Schedule B-Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/ Square
Supply and installation Cable termination board as per item no. 5 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Excavation of cable trench of 100 cm depth and 30cm width at level /track crossing and platfarm as per cable route chart to be given by Engineer at site and its refilling same excavated soil consolidating by ramming to the level of 20cm above the ground level over the trench as per item no. 6 of Schedule B-Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Laying of Signalling Cable/quad cable as per item no. 6 of Schedule B-Signal Technical Specification. Above/
Laying of HDPE PIPE as per item no. 7 of Schedule B-Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply of 4 conductor disconnect terminal block for test and measurement 0.08mm2- 2.5mm2 centre marking with test slot for test plug 2mm/0.079 in and 2.3mm /0.91 in carrier rail din 35 front entry cage clamp connection grey WAGO or similar as per item no. 8 of Schedule B-Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply of end and intermediate plate 2.5 mm/0.098 in thick WAGO or similar as per item no. 8 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply of screw less end stops 10/0.394 in wide carrier rail din 35 grey WAGO or similar as per item no. 8 of Schedule B- Signal Technical Specification. Inspection: Consignee & Officer Incharge of the work Above/
Supply of steel carrier rail 35x7.5 mm, 1 mm.0.039 in thick unslotted, yellow with CROME WAGO or similar, as per item no. 8 of Schedule B- Signal Technical Specification. Above/
Supply of Marker Strip inspection: consignee & officer incharge of the work. Above/
Painting of Apparatus case single including supply of paint as per item no. 9 of Schedule B-signal technical specification. Inspection: Consignee & Officer Incharge of the work Above/
Painting of Apparatus case half including supply of paint as per item no. 9 of Schedule B-signal technical specification. Inspection: Consignee & Officer Incharge of the work Above/
Horizontal direction drilling [HDD]/Trenchless digging/machine drilling without damage to surface road /track for laying/insertion of HDPE/GI/DWC pipe. The bore shall be done at the depth of minimum 1400mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. i.DWC/HDPE/GI Pipe Supply is not covered under this item. 19 Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. The Bore should be capable enough for insertion of 120 mm dia DWC pipe.ii.Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Payment of boring shall be made only after DWC/HDPE/GI pipe is laid in the bore.iii.The rate is inclusive of all materials equipments nad labour required for doing trenchless horizontal boring under the railway track. To this extra shall be admissible on any account than the rates as per above. Payment shall only be done after laying of DWC/HDPE pipe in the bore. Inspection by:-Consignee. Above/
Supply of Double Walled Corrugated (DWC) HDPE Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non flame propagating type and of size 120 mm outer dia,& 103.5 mm inner dia. (The 20 manufacturers,suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipe ssupplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified. Inspection: RITES Above/
Cutting of all types of platforms/road crossing and trenching and excavation to a 21 width and depth of 300 mm x 300mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it after wards as per original condition. In hard rocky ground area , cables will be laid normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench. The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no.SDO/Cable laying/008, issued vide RDSO document no. RDSO/SIG/2010 Version 1.1 dated 04.02.2014 or latest. Inspection: Consignee & Officer Incharge of the work. Above/
Fabrication and supply of Powder Coated MS channel of size for 830mmX457mmX75mm with 50mm collar both side having 3 holes both side for fixing of fastner. Inspection: RITES Above/
Supply of MS fastner suitable to fix MS channel of size for 830mmX457mmX75mm with 50mm collar both side having 3 holes on wall. Inspection: Consignee & Officer Incharge of the work. Above/
Transportation and fixing of MS channel on wall. All fixing materials nut bolts & washer etc will be supplied by contractor & work shall be done as per the direction of Site Engineer. Inspection: Consignee & Officer Incharge of the work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechSpec_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].