PROVN OF LPG CYLINDER STORAGE ROOM VEHS REPAIR BAY SHED AUGMENTATION OF WATER SUPPLY PIPE LINE SPLIT AC 09 X GEYSERS 12 X EXHAUST FAN LADIES TOILET SENTRY POST WITH PPGI SHEET CERTAIN UINTS UNDER AGE BR II AT BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Spreading and levelling of soil received from item no. 2.00 here-in before after RF&R in layers n. exc. 25cm thick and well ramming including watering as required complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation of pole, stay, filling & mass concrete complete including formwork if required all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 23.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS angle and tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and directed.

M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.for post (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre-painted coloured plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for sand filling under floor or in foundations in layes n. exc 25 cm thick including watering and consolidation all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in flooring, finshed even and rough for receiving floor finishes cement complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

Supply only plastic dividing strips 1.5mm thick and 38mm wide complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed mortar 20mm thick in CM 1:6 complete all as specified and directed.

Ditto all as per item No.42.00 here-in-before but as in riser, dado, steps & skirting etc. including 10mm the rendering as backing coat in cement mortar (1:4)

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with gray cement and pigment complete all as specified and directed.

M&L precast PCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar 1:4 including formwork if required complete all as specified and directed. (Note : Precast man hole covers shall be casted on platform as approved by GE, and curing shall be carried out in water tank continously for 14 days, the cost of temp tank and plat form is deemed to be included in this item )

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for (350mm x 450mm) x 7 to 8mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick of CM 1:3 on ceiling surfaces other than fair faces of brick work and surfaces finished even and smooth without using extra cement complete all as directed

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed. (Pidiproof of Dr.fixit or equivalent)

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F 100 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 250mm size Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or rubber gasket in squares not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 4.00 mm thick frosted glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F for Steel window with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in steel ventilator with top hung shutter including hinges steel peg staycomplete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement, etc complete all as specified and directed.

M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authoriesed applicator of the membrane manufacturer with the following specificatons, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/Sqm manufacturec by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on te prepared dry surface. (b) Laying 3mm thick APP modified water proofing polymeric menbrane reinforced with non woven polyester fibre using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Applying one coat of solar reflective bituminous aluminum paint @ 0.10 Kg/Sqm over APP membrane complete all a specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Preparation of new surface of wall and applying two coat of emulsion distemper over a coat putty alongwith one coat of primer all as specified and directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of white wash on wall complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of colour wash on wall complete all as specified and directed.

M&L for preparing new plastered on ceiling and applying two coats of white wash complete all as specified and directed.

S&F white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan european type (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and also including cast iron S trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. (Make: Hindware/Cera/Parryware)

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints laid in trenches or in floor complete all as specified and directed.

S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F 110mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) 'P' or 'S' trap complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

S&F 75mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and as directed.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F shelf PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F Salt-glazed stoneware gully traps, square or round mouthed of size 150x150mm, (type 'P' or 'S') setting and jointing to drains with cement mortar 1:1 complete all as specified and directed.

S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F in 15 mm Stop valves, cast copper alloy with chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Pillar taps, 15mm bore dia of pipe, fancy type (long neck) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar(1:1) 150mm internal dia of pipe complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for One light point or one fan point /lightpoint/ bell point controlled by one switch

Ditto all as per item No. 109 here - in - before but One 3 pin socket outlet, 5 Amp independent

Ditto all as per item No. 109 here - in - before but One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including modular swtch boards concealed type, readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

S&F switch socket outlet combination 3 pin 5/6 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 6 pin 5/15 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 5Amp, 230 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed.

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F Building security LED light luminaire fitting 1X15 W new generation energy saving & envoirmental friendly long life versalite pressure die-cast aluminium IP66 roadway luminarie with high power LEDs as light source and electronic driver with 1.5m long and PC cover having top openning opreate driver compartment all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F ceiling fan 3 star 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.

S&F Exhaust Fan of Size 300mm sweep, 230Volts AC, metal body, heavy duty including frame and louvers and connection from existing ceiling rose including cutting hole and making good distrurbed surface and necessary fixing arrangement complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 8 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F MCB 'C' series SPN 20 to 32Amps, breaking capacity 10KA complete all as specified and directed. Make:- LEGRAND/L&T/ C&S/ Indoasian

S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F street light bracket made out of GI tubing medium grade size 32 mm bore 1.00 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair MS flat iron 50mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unservicable all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part I including necessary excavation and earth work in any type of soil PCC (1:3:6) type C-1 chamber with 40 mm thick pre cast RCC (1:2:4) type B-1 cover slab with TMT bar 8mm dia 150mm long reinforcement, watering funnel, 40mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for protection of cable, laid in trenches / road cossing incl necessary clamp, bolt/nut if any all as specified and directed. (Note: Excavation, earth work shall be measured and paid separately)

M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit 25mm bore ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

Cutting out existing CI pipe line of any size, inserting tee including necessary lead joint- 03 Nos complete all as directed. (Note :- CI fitting will be measured and paid seperatly).

S&F pipe ductile Iron, S/S including specials, Class “K-9” ,100 mm (4”) dia laid in trenches all as specified & directed. (Make: Electrosteel or Equivalent).

S&F pipe ductile Iron, S/S including specials, Class “K-9” ,150 mm (6”) dia laid in trenches all as specified & directed. (Make: Electrosteel or Equivalent).

S&F PPR (Poly Propylene random) pipe size 110mm OD, IS-15801, 3 layer (Green/Black/Ehite colour) fusion welded grade PN-16 SDR-7.4 (Pressure nominal 16 Kg/Sqm) having thermal stability for hot & cold water supply with and including bend, socket fittings, laid in trenches complete all as specified & directed. (Make: Reliance/Finolex/Savoir faire manufacturing Co. Ltd) (NOTE:- Contractor shall give 7 years warranty certificate of any manufacturing defect and leak proof material & 50 years product life certificate will be submited before RAR process.)

S&F flange set (Socket with 'O' ring) size 110mm with connected items complete all as specified and directed.

S&F sluice valve cast iron confirming to IS : 14846 both end flanged with S/S spindle with nut class PN - 1.0 ISI marked complete with hand wheel nuts, bolts, washers & rubber gusket etc for the size 100 mm bore complete all as specified and directed. (Make - Upadhya/Venus/Hazra/Kirloskar)

S&F sluice valve cast iron confirming to IS : 14846 both end flanged with S/S spindle with nut class PN - 1.0 ISI marked complete with hand wheel nuts, bolts, washers & rubber gusket etc for the size 150 mm bore complete all as specified and directed. (Make - Upadhya/Venus/Hazra/Kirloskar)

S&F Cast Iron Air release valves conforming to IS 14845-2000 with tamper proof arrangement of size 100 mm bore incl taking down of old unsv one all as specified and directed.(Make - Upadhya/Venus/Hazra/Kirloskar)

S&F bends (any type, radius and angel) tapers any type (straingh, bend, increasing, decreasing or double socket etc) tee pieces single brancehs 'Y' junction double branch, cross (all socket or socket and spigot) collars, caps and plugs for Upto 150 mm bore of pipes all as specified and directed.

M&L for run lead joints for CI pipe of 80mm bore of pipe with spun yarn and complete testing all as specified and directed.

M&L for run lead joints for CI pipe of 100mm bore of pipe with spun yarn and complete testing all as specified and directed.

M&L for run lead joints for CI pipe of 150mm bore of pipe with spun yarn and complete testing all as specified and directed.

M&L for construction of brick masonry valve pit of size 1200x1200x1200 mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, and 15mm thick rendering in cement mortor (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3 mm thick MS sheet/plate, welded with 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embeded in PCC 1:2:4 type B-1 (20mm graded aggregate) block of size 230 x 200 x 100mm and provision of hinges, handle and locking arrangement including two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer and necessary excavation and earth work in soft/loose soil including dismantling of existing valve pit complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 15mm dia all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA, Model Mystry or equivalent model of V-Guard / Recold / Havells / Bajaj)

Supply, install, testing & commissioning of hi wall, split-type Air Conditioner Unit of capacity 2.0 TR based on Inverter Technology comprising of indl indoor & outdoor units complete with cordless remote control unit & with in-built air ionizer & plasma filter for better indoor air quality with minimum 5 star rated incl electric connection complete all as specified and as directed. NOTE : (i) The Air Conditioner shall be initial filled / charged with refrigerant of specified quantity & the refrigerant to be used shall of Non-CFC type & as per the latest technology. (ii) The cost of additional refrigerant pipes required (if any) is deemed to be included in the unit quoted rates. (iii) Suitable piping of adequate length & size 5/8" for drainage of condensate water from indoor unit shall be provided & the cost of the same is deemed to be included in the unit quoted rates. (iv) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 4.0 KVA incl electric connection complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug socket with double pole one MCB of 20 amp complete all as specified and directed.

Prahalad Rai

SHRI S K BHATTACHARJEE

M/S KAR CONSTRUCTION

M/S CONTRACTS

MUKHERJEE ENTERPRISE