Construction of Working Womens Hostel G 4 floors for 466 Nos. Capacity with development works at Tambaram Sanitorium in Tambaram in Chennai city on behalf of Tamil Nadu Working Womens Hostel Corporation Ltd

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

2.2) Sand Gravel Mix

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) S&F of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

39) M.S Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) S & F 20 mm dia Alu. Hanger Rod

47) S & F Alu Towel rail 75 cm long

48) S & F 5 pin Coat stand

49) S & F chromium plated 8 gauge Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52) PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

Electrical arrangements 78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

112) S & F of Exhaust Fan 300 mm dia

238) Anticorrosive treatment for steel grills

ANNEXURE 1.5.1) Earth work excavation for Open foundation (excluding refilling) c. 3 to 4 mt.

d. 4 to 5 mt.

1.15.1) Engaging the JCB on Hire Basis for Shifting the Existing damaged /Condemned Vehicles nearer to the site incl.hire Charges, Fuel Charges, driver charges etc.

2.1.1) Filling C.S. sand

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.2) Brick work in C.M. 1:5 using Fly Ash bricks of size 23 x 11 x 7 cm in Foundation and Basement

8.2.4.2) Standardised concrete Mix M25 Grade Concrete a. In Foundation and basement

b. Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In Fourth floor

g.In Fifth floor

9.2.2) Brick work in C.M. 1:6 using Fly Ash bricks of size 23 x 11 x 7 cm a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

f. In Fifth Floor

10.2.2) Brick partition work in C.M. 1:4 using Fly Ash bricks of size 23 x 11 x 7 cm 110 mm tk (B.P.) a. In Foundation and Basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

g. In Fifth Floor

11.2.2) Brick work in C.M. 1:4 using Fly Ash bricks of size 23 x 11 x 7 cm 70 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

14.2.I) Precast Cupboard slab 20 mm tk.using standardised concrete mix M25 a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

14.2.II) Precast cupboard slab 40 mm tkusing standardised concrete mix M25 b. In Ground floor

c. In First floor

d. In Second floor

e. In Third floor

f. In Fourth floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a. Door size 1.200m x 2.100m (Single Leaf)

b. Door size 0.900 m x 2.100m (Single Leaf)

c. Door size 0.750 m x 2.100m (Single Leaf)

21.5.6.2) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1.80 m x 2.10m (Double leaves)

b) Door size 1.50 m x 2.10m (Double leaves)

22.1.8) Supplying and fixing of TW door with shutters of size 900X2100mm with aluminium fittings (Single leaf)

22.3.2) Providing MDF board (18mm thick) double leaf shutters with TW frame for cup board/ ward robes.including cost of labour two coats of varnish etc.,

22.6.3) Providing Teak wood glazed openable french window shutters and 5.5mm thick plain / colour glass for panels a) 1500mm x 2000mm (Doubles leaves with brass fittings)

22.7.1) Providing Teak wood glazed openable french window shutters and 5.5mm thick plain / colour glass for panels a. 2000 x 2000mm (Doubles leaves with Alu. fittings)

b. 1800 x 2000mm (Doubles leaves with Alu. fittings)

22.8.1) Providing Teak wood glazed openable french window shutters and 5.5mm thick plain / colour glass for panels a. 1200 x 2000mm (Single leaf with Alu. fittings)

b. 900 x 2000mm (Single leaf with Alu. fittings)

c. 750 x 2000mm (Single leaf with Alu. fittings)

23.2.1) 5.5mm thick pin headed Glass panels with Aluminium beedings

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

31.5.1) Finishing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.2.1) Plastering in C.M. 1:5, 12 mm tk.

34.2.1) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3,10 mm tk.

36.1) Cement mortar Border in C.M. 1:5,12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.3.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.6) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C.1:3:6, 450 x 300 x 150 mm

50.3.7) Supply of Korean lawn and laying in position.

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

52.1.2) Supplying and laying of 40mm dia PVC ASTM pipes AGL

52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

52.9) Supplying and delivery of 50mm dia M.S clamp set for erection of submersible pumpset in wells

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) S & F of 15mm dia half turn CP long body tap

54.2.1) S & F of 15mm dia half turn CP short body tap

56.3.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using Fly Ash bricks of size 23 x 11 x 7 cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal Tee

b. 160 mm dia PVC Equal Tee

64.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Controlled by Modular switch 6A-1W)) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

64.2.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) controlled by modular switch a. Light point with ceiling rose

65.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. Controlled by Modular switch 6A - 1W)

66.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (Controlled by 6 A Modular swtich - 2W)

67.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 6 amps 5 pin Universal socket point @ Switch Board Itself. ( Modular)

68.2.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 6 amps 5 pin Universal socket point at convenient places.( Modular)

68.3.2) Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 1.5 sqmm FRLS PVC insulated stranded copper conductor cable

69.3.3) Supply and fixing of 16 amps power plug (Modular) socket with switch

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer

77.4.5) Supply and fixing of MS box of suitable size for the terrmination of cable (with in and out arrangements) and with earth connections.

77.4.6) Supply and laying of 25mm PVC rigid pipe concealed in wall and ceiling with necessary junction and openings at required locations for the drawal of communication wire.

77.7) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.1) Supply and fixing of 32A fuse units on suitable TW board with necessary internal connections for controlling the power plug.

82.3) Supply and fixing of 30W LED street light with fittings

82.6) Supply, Installation, Testing and Commissioning of 2 KVA sinewave single phase inverter with exide / equivalent make tubular battery for 30 minutes backup time with suitable rack / trolly for inverter and batteries.

84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.1) Supply and clamping of 4 core 2.5 sq. mm PVC sheathed and armoured copper cable from alternator to the proposed DG panel on wall / in the hume pipe with necessary glands and crimping at both ends.

88.1.1) Providing Shahabad stone flooring in C.M 1:3, 20mm tk

88.3.1) Providing Rajasthan kota stone flooring in C.M 1:3, 20mm tk

93.2.1) Plastering with CM 1:3, 12mm with WPC

96.2.7) Supplying and laying of 83mm thick Rubber Moulded paver block

98.5.1) TW panelled door shutter Door size 2000x2700mm Double leaves with brass fittings

105.3) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand

107.3) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

112.7) Supply and fixing of 375 mm ( 15") sweep light duty / heavy duty AC exhaust fan complete with internal connections in the kitchen.

127) Supplying and laying of 40mm dia PVC ASTM pipes BGL

155.3) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar Incoming: 1 no. 125A TPN 15KA MCCB with all protective devices Outgoings: 9 nos. 63A TPN 15KA MCCB with all protective devices.

156.5) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar Incoming: 1 no. 125A TPN 15KA MCCB with all protective devices Outgoings: 6 nos. 63A TPN 15KA MCCB with all protective devices.

156.7) Supply and erection of 315 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber

171.1.2) Labour charges for the erection of Submersible pumpset in borewell / openwell Upto 5 HP

171.2.7) Supply and Delivery of 2 HP submersible motor Pumpset with ISI mark IS 8034/2002 without Panel Board of capacity 20LPM X 150m of electric motor pump set with accessories at borewell for Single phase operation

171.2.9) Supply and delivery of Open well Submersible pump set (3 HP-125 x 40 lpm x m)

175.1.1) Supply and fixing of triple pole and neutral six way 7 segment 3 tier compartmental type MCB distribution board

175.1.5) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board

175.1.6) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess a) 40 A TPN 10 KA MCB

b) 10/20/32A DP 10 KA MCB

c) 63A TPN 10 KA MCB

180.1.1) Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required

180.1.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral

180.1.4) Supply and run of 2 of No.8 copper wire for earth connections

184.2.5) Supply and fixing of 2' 10 W batten( mirror light) LED fitting complete with all accessories on wall / ceiling with PVC unsheathed copper leads from terminal to the fitting

207.3.1) Two coats of Plastic Emulsion PAINT including primer for inner & outer walls

207.4) Painting the ceiling with one coat Plastic Emulsion paint incl.primer

213) Supply and fixing of SFRC manhole cover with frame with locking arrangement a. 600mm x 600mm

b. 300mm x 300mm

213.2) Supplying and delivery of 9" dia MS Borewell cover for pumpset

238.1) Anticorrosive treatment for window grills

255.6.2) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.7.2) Supply and fixing of LED bulb suitable for fixing it to pendent / backlite battern holder b) 12 watts LED

255.7.6) Supply and fixing of fancy type AC / DC 76 mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with modular type push switch

255.8.3) Supply and fixing of 12 W surface / recess mounted down lighter complete ( ceiling fixture ) with 12 watts LED bulb and necessary connection

255.8.4) Supply and fixing of 2 x 2' square type recessed / surface mounted fitting with 36 W LED bulbs and with necessary connection

257) Providing Barbed wire fencing using 10 gauge barbed wire- two ply & four pronged (Galvanised)

343.1.3) Suppling and fixing of 0.47mm thick Galvanium sheet plain & ornamental sheet including all labour charges, fixing screw, washer nails

344.2) S&F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Concrete designer tiles flooring

361.2.2) Antiskid Nano Polish Vitrified Flooring with 1st Quality homogeneous tiles in C.M 1:4 incl. pointing with Latricrete or Equivalent make Epoxy Stain Free (SP-100) grout with spacers (min.2mm)

361.2.3) Supply and Laying of Nano Polish Virtified tile Flooring with 1st Quality homogeneous tiles in C.M 1:3, 20mm Thick incl. pointing with Latricrete or Equivalent make Epoxy Stain Free (SP-100) grout

365.1) Supplying & fixing of Stainless steel Hand Rails for Staircase

367) Providing wooden Melamine polish for new wood work

379.7.1.3) Supply and laying Granite Tile wall cladding using 10mmtk (Ruby Red) tile in C.M 1:2, 10mm tk .

379.7.1.4) Supply and fixing of Granite tiles Jet black C.M 1:2, 10mm tk for Staircase wall portion

379.7.1.5) Supplying and laying Granite tiles cladding in CM 1:3, 10mm tk using sathali steel/ grey for Staircase portion

379.8.6.2) S & F of Granite slab of size 4'x2', 18 to 20mm Thick For kitchen arrangements (jet black) C.M 1:3, 20mm tk a. In Ground floor

383.2.1) Providing double nosing to the edges of Granite slab

383.4) S&F of PVC flushing cistern

383.4.2) Supply and fixing of Stainless steel wash hand basin of size 3.75 x 0.60m

384.4.4) S&F of stainless steel sink 600 x 600 x 200mm

448.2) Providing PVC Tee with end cap

450) Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark

450.1.1) Supply and Fixing of CP Angle cock tap

450.8.1) Providing one coat of Wallputty for new plastered surface

450.8.2) Supply and Fixing of CP Shower Arm with Overhead shower rose

451.3) Supply and Fixing of CP two way bib cock with health faucet

453.2) Supply and Fixing of Brass chromium plated soap tray of size 150mm x 100mm

504) Supply and delivery of 12mm thick nylon rope including cost of materials and labour charges etc., complete as directed by the departmental officers.

513.1) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe. (For Computer earthing)

528.1.1) Supply and fixing of perforated cable trays of sizes as given below made out of 14 SWG CRCA sheet steel and hot dip galvanized with supports a) 150 x 50 mm

609.6.1) Supply and delivery of following casing pipes as per IS 12818 /11992 of approved quality for borewells with average wall thickness a) 200mm OD of PVC casing pipes (6kglcm2)

b) 150mm OD of PVC casing pipes (6kglcm2)

609.6.2) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2) as per IS 12818 11992 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes a) 150mm dia casing pipes assembly

b) 200 mm dia casing pipes assembly

615.3.1) Supplying, delivery and fixing of 15 Amps DOL starter with three phasing preventor with ammeter conforming to IS 13947 with auto restart facility

615.3.5) Supplying and fixing of MS fabricated DOL panel control board

616.4.1) Supplying and delivery of 32mm dia HDPE pipe

619) Supplying and delivery of following GM specials & plumbing fittings required for erection of pumpset a. 40mm GM gate valve

b. 25mm GM gate valve

620) Supply and fixing of the following dia stainless steel pipe Nipple of approved make a. 40mm stainless steel pipe nipple

b. 20mm stainless steel pipe nipple.

621) Supplying and fixing of 20mm CP extension nipple Confirming to I.S Specifications including cost materials and fixing labour charges

707.3.1) Supply and laying PVC 3 core 4 sqmm flat type copper cable

724.5) Supply and laying of PVC / XLPEarmoured LTUG cable in a trench BGL From the EB pillar box to the CT metering a) 3.5C x 185 sq mm PVC / XLPEarmoured LTUG cable

724.6) Supplying and clamping of XLPE, aluminium conductor 1.1KV grade armoured ,MV cable of the following sizes on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs, etc a) 3.5 c x 95 sqmm PVC / XLPE LTUG armoured cable AGL

b) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable AGL

c) 4 c x 16 sqmm PVC / XLPE LTUG armoured cabl AGL

d) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable AGL

724.7) Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection. a) 3.5 c x 185 sqmm PVC / XLPE LTUG armoured cable

b) 3.5 c x 95 sqmm PVC / XLPE LTUG armoured cable

c) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 16 sqmm PVC / XLPE LTUG armoured cable

e) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable

724.8) Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. a) 3.5 c x 185sqmm PVC / XLPE LTUG armoured cable

b) 3.5 c x 95 sqmm PVC / XLPE LTUG armoured cable

c) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 16 sqmm PVC / XLPE LTUG armoured cable

e) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable

741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC Plug )

747) Supply, Installation, testing & commisioning of Early Streamer Emission Lightning protection system as per NFC-17-102 standard or equal as per IS-2309 1969, 7689 with all acessories

747.1) Supply and commissioning of lightning arrestor

756.1) Supply and Fixing of Stainless Steel Mosquito Net including cost of aluminium frame, channel, mesh, hinges, stopper, labour charges, transport etc.

756.2) Supply and Fixing of Main Curtain with lining cloth, curtain stitching, curtain rod including fixing

799.1.1) Drilling of Borewell anywhere inculding transportation from one place to another place a) Drilling of borewell in upto 60m

799.1.2) Reaming 140/150mm dia pilot bore to 300mm dia as directed by the departmental officers

799.2.1) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using " DTH Rig" (a) Drilling of borewell in rock area

799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 1 Hours]

829.1.3) Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking - First depth of 2 metre a) Existing Open well (10m to 12m)

829.6) Sinking well in loose soils, light black cotton soil, sandy loam and ordinary soil under water including bailing or pumping charges if necessary etc., complete - First depth of 2 metres a) Existing Open well (8m to 10m)

832.5.2) Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

Sewage Treatment Plant 911.2.1) Supply and installation SS Bar screen, type of screen-Medium, Size: 1.0 m x 1.0 M x 5 MM Thick

911.2.2) Supply and Installation of Fine Membrane diffuser, Size: 90MM dia x 1.0 M Long with retrievable system , MOC: EPDM with inter connecting air Cpvc pipe lines and fitting

911.2.3) Supply and Installation of Coarse Membrane diffuser, Size: 90 MM dia x 1.0 M Long with retrievable system , MOC: EPDM with inter connecting air Cpvc pipe lines and fitting

911.2.4) Supply & Installation of STP - Collection water transfer Submersible Cutter pump with Motor, Type-Cutter, Model JDSK, discharge size : 40NB, Head: 10 Meter, Flow : 50 Kl/hr, Electrical panel: 1 HP / 3 Phase.

911.2.5) Supply and Fixing of Air blower, Capacity-200 M3/hr, Pressure-0.4 Kg/cm2, Make : Everest / KAY / Equivalent with MSEP Inter connecting air distribution pipe line & fitting up to Aeration Tank

911.2.6) Supply & Installation of Blower Motor, Electrical - RPM 1500, 5.5 HP, 3 Phase with Control panel Make Kirloskar / Crompton/ equivalent

911.2.7) Supply and Installation Secondary Clarifier Mechanism, Gear box with Motor, Electrical -1.0 HP, 3 phase, Control Panel providing MSEP Support platform and MS Shaft, scrubber with Internal Accessories

911.2.8) Supply and Fixing of Pressure Sand Filter (PSF), Size: 800 MM dia x 2000 MM Height on straight (HOS) x 6 MM Thick, 50 NB MSEP frontal Pipe Lines with different size Filter Medias – 1200 Kgs

911.2.9) Supply and Fixing of Activated carbon Filter (ACF), Size: 800 MM dia x 2000 MM Height on straight (HOS) x 6 MM Thick, 50 NB MSEP frontal Pipe Lines with under bed Filter Medias – 250 Kgs & Activated Carbon IV 900 –300 Kgs

911.3) Supply & Installation of Chlorine dosing pump, Capacity- 6 LPH @ 4 Kg/cm2, Type: Electronic Metering pump with Suction & Delivery NRV assembly and 5/8” dia PP Hose-10 Meter, with control panel.

911.3.1) Supply & Installation of STP - Sludge recirculation Pump with Motor, Type-Monobloc non clog, discharge size : 40 NB, Head: 35 Meter, Flow : 4 Kl/hr, Electrical : 1 HP / 3 Phase, Control panel Including 50 NB Suction & discharge MSEP Pipe lines, NRV, Control valve with complete accessories

911.3.2) Supply & Installation of STP – Treated water transfer pump with Motor, Type-Monobloc non clog, discharge size : 40 NB, Head: 35 Meter, Flow : 5 Kl/hr, Electrical : 1.5 HP / 3 Phase, control panel Including 40NB Suction & discharge MSEP Pipe line, NRV, Control valve with complete accessories

911.3.3) Supply and Installation of MSEP Interconnecting 40 NB pipes works, including NRV, Valves for all Service line pipes and fittings

911.3.4) Supply and Installation of UPVC Interconnecting 40 NB pipe works including NRV, valves for all drain line pipes and fittings

911.3.5) Supply of MBBR Media for aeration tank

911.3.6) Supplying and delivery of electrical control panel board for the STP all pumps - 11 Feeder

911.3.7) Supplying and Installation of electrical cables and tray for the STP with all pumps

911.3.8) Labour and Plumbing work for all electro Mechanical equipments installation & commissioning work

Fire Fighting: 941) Supply, Installation , testing and commissioning of electric driven Terrace / Mono Block Booster pump suitable for automatic operation and complete in all respect as required.

941.1) Supplying, installation , testing and commissioning of Star Delta starter

941.2) Supplying, installing ,testing and commissioning of FRLS,PVC outer sheated, steel armored, aluminum conductor, 1100v grade power cables with glands etc. a) 4 C x 16 sq.mm. Aluminum cable for Booster pumps

b) 2 C x 2.5 sq.mm Copper armored for Instrumentation

c) 3 C x 2.5 sq.mm Copper armoured cables For start / stop push buttons

941.3) Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS standards. 100 mm Nominal dia

941.4) Supplying, Installing, testing and commissioning CI butterfly valves as per IS standards 100mm Nominal dia

941.5) Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. a) 15mm dia.

b) 25 mm dia

941.6) Supplying, installing ,testing and commissioning of Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / colors / reducers etc. complete.

941.7) Supplying, installing, testing and commissioning of Pressure gauges of 0-20kg/cm2 range and pipe lines for the respective floors near to the flow switches with Ball valves, siphon, Fittings like unions / colors / reducers etc. Glycerine filled pressure gauges to use on pump discharge lines.

942) Supplying, installing ,testing and commissioning of M.S black pipes of class 'C' to confirm IS 3589, 6 mm thick, (Gr.410) a) 100mm Nominal dia

b) 80mm Nominal dia

942.1) Supply and erection of single headed hydrant valve as per IS 5290, made of Gun metal with 63 mm dia instantaneous out & 80 mm dia fanged inlet, Blank cap , chain and hand wheel etc complete. with Orifice plate(SS304 6MM THK) as required to minimize the pressure at discharge point.

942.2) Supply and erection of Double door HOSE BOX with lock and key type

942.3) Providing 2 lengths of 15 M long, 63mm dia RRL hose couplings made of GM with instantaneous couplings and Hoses shall be stored in side the hose cabinet with locking arrangement, Bracket and required accessories.

942.4) Gun metal short branch pipe with Nozzle.

942.5) Supply and erection of Hose reel drum of swinging type with 19mm dia Rubber braided hose of 36M. length with Gate valve (upstream) and Shut off Nozzle, complete.

943) Supply of Hand held Fire Extinguisher - CO2 - 4.5 Kg with suitable Metal Floor stand MS fabricated painted in black colour

943.1) Supply of Hand held Fire Extinguisher - ABC Powder - 4.5 Kg with suitable Metal Floor stand MS fabricated painted in black colour

943.2) Providing safety equipments: CO2 fire extinguisher : 1 No.; 9 ltrs capacity fire buckets: 3 Nos, & rubber mat : 1 No.

943.5) Fire exit signages in self adhesive foam board

944) Supply of 12 zone conventional type fire alam panel along with battery back in power failure condition

944.1) Conventional type Heat Detector

944.2) Hooter

944.3) Manual call point

944.4) 2 x 1.5 sqmm Armoured cable

EPABX 949) Supply of NEC SL2100 digital EPABX System System Configuration :  06 Trunk (P & T Line) Ports  32 Station Ports  01 Key Telephone System

949.1) Installation & Programming Charges

949.2) Supply of Panasonic Basic Telephone TS-500

949.3) Supply and laying of 2 pair pvc 0.5mm Telephone cable including labour charges

949.4) 100 PAIR KRONE BOX WITH MODULES

NETWORKING 950) Supply and Installation of DLINK 10/100/1000 24 PORT GIGABYTE ETHERNET SWITCH

950.1) Supply and Installation of DLINK 24 Port Patch Panel

950.2) Supply and fixing of cable Manager

950.3) Supply and fixing of Power Manager

950.4) Supply and Installation of 32U Networking Rack with, Trey & Accessories

950.5) Supply and Installation of D-Link Patch Card (01 Mtr)

950.6) Supply and Installation of D-Link Patch Card (02 Mtr)

950.7) Supply and Installation of D-Link I/O Box-single

950.8) Supply and Installation of D-Link I/O Box-DUAL

950.9) Supply and laying of f D-Link Cat6 UTP Ethernet cable including labour charges with all Accessories 74.00 725 Mtrs 53,650.00

950.9.1) DLINK OUT DOOR CELINNG ACCESS POINT

950.9.2) Installation & Termination Charges for net working switch, rack patch chord etc.,

957.9.7) Providing & fixing of flush water supply arrangements using CPVC pipes (Above GL) a.)20mm dia CPVC pipes AGL

b.) 25mm dia CPVC pipes AGL

957.9.8) S & F of flush water supply arrangements using CPVC pipes c.) 40mm dia CPVC pipes from STP to OHT below GL

957.9.9) Supplying, laying and fixing of 32 mm dia CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11 abest

958.4) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity Passenger lift with out machine room. (G+4 floor)

958.4.1) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity Passenger lift with out machine room. (G+3 floor)

960.3) Supply, erection, testing and commissioning of 125 KVA Diesel Generator set complete with all accessories

960.3.1) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

960.3.2) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.

EXHAUST PIPE: 960.3.3) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete.

960.3.4) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

960.3.5) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.

960.3.6) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

Approval from CEIG / CEA: 960.3.7) Provision for approval by CEIG for commissioning the lift

960.3.8) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set

960.3.9) Towards Fabrication, supply and installation of of CT metering box for availing the power supply from TANGEDCO

960.4.5.1) Supply and fixing of 4' 18 watts LED Tube Light (Crystal glass)

Numbering and Lettering: 961) Supplying and fixing of Aluminium TNPHC Emblem of 30" height

961.1) Supplying and fixing of following height aluminium letters a) 12" height aluminium letters

b) 6" height Aluminium letters

961.2) Supply and fixing of plastic foam name plate with vinyl cutting letter with approved colours etc., complete as directed by the departmental officers a) 24" x 8"

961.4) Providing Texture Finish over the Existing Plastered wall Surface using Duracast crosstex with desired pattern (Rainfall, vertical, Horizontal of 2 to 2.5mm thk)

961.5) Providing ornamental border design for button shape works (9" x9") 25mm thick Projection /Stapay works as per the drawing including cost of materials like cement and labour charge and as directed by the departmental office .,all complete.

CCTV: 970) Supply Of HIKVISION Dome WDR (Wide Dvnamic Ranqe) lP Gamera Sensor Size:1/3 inch, Minimum 4 Mega Pixel, Lens Size/ Focal Length :3.6mm,

970.1) SUPPLY OF HIKVISION NVR (Netword Vldeo Recorder) : 16 channele NVR. No. of camor.ls eupported l6 chantrel Comprossit>n Format: H.264, H 265 MJPEG,

970.2) SUPPLY OF DLINK - 24 Port Rack Mountable POE - Managed switch

970.3) SUPPLY OF DLINK - 8 Port POE - Managed switch

970.4) LG - 55 inch HD Display Screen: Size: 55 inch',: HDMI - 2 and VGA, USB, 178 degree x 178 degree Operating Condition 24 Hours.

970.5) Hard Disk - 4 TB Surveillance Hard Disk

970.6) HDMI CABLE -15 MTRS

970.7) DLINK CAT6 UTP CABLE

970.8) HDMI SPLITER 2 Way

970.9) RJ6 Video AV Cable

Solar Water heater arrangements: 980) Supply and Installation of 1000 LPD Solar water heating system FPC type Stand alone models should work up to 5 Bar pressure

980.1) Providing 2HP pressure pump to pump the cold water from the OH tank to the Solar Water Heater, outdoor type with proper cover to protect it from rain

Solar Power Plant: 980.2) Solar Photo voltaic module as per MNRE

980.3) Solar on Grid /Grid tie inverter as per MNRE

980.4) Roof top mounting structure and electrical accessories, mounting structure design to with stand wind velocity upto 150km/hr.

980.5) Supply and commissioning of control panel with acessories installation of AC DB and DC DB with 10 sqmm 4 core cable

980.6) UG cable work LT 10sqmm copper, 4 core copper cable, AC DB to main distribution panel

980.7) Liazoning work for solar net meter from State Electricity Board for obtaining Netmeter.

980.8) Supplying & fixing of electrically operated sanitary Napkin incinerator / destroyer 200 nos per day to top door opened, wall mounted in the toilets and easily operated incl.. Cost of ash collection tray, smoke outs etc., all complete.

983.4) Supply, Installation, of PUBLIC ADDRESS SYSTEM a) Amplifier 250 watts

983.5) 6 watts wall mount speaker

983.6) 2 x 1.5 sqmm Armoured cable

983.7) Goose neck mic

KITCHEN Arrangements 990) FUME EXHAUST CABINET TYPE BLOWER with 5 hp 3 phase, 777 rpm, 4 pole Centrifugal Motor

990.1) G.I. DUCT FOR EXHAUST with m.s. angle frame, G.I. straight duct, happer,tapper, collar piece and cowl.

990.2) FRESH AIR CABINET TYPE BLOWER with 3 hp 3 phase, 410 rpm, 4 Pole Centrifugal Motor

990.3) G.I. DUCT FOR FRESH AIR with m.s. angle frame, G.I. straight duct, happer, tapper, collar piece.

990.4) DOUBLE SIDED REFLECTED FRESH AIR GRILL

990.5) S.S. EXHAUST HOOD 288" X 40"X 24" with hood support piece, s.s. angle for s.s. hood joint.

990.6) S.S. GREASE FILTER WITH HANDLE

990.7) ERECTION MATERIALS AND ERECTION CHARGES FOR EXHAUST G.I. thread rodd, G.I. channel patti, G.I. bolt and nut, washer,rivets, asbestos rope, silicon paste,

990.8) ERECTION MATERIALS AND ERECTION CHARGES FOR FRESH AIR G.I. thread rodd, G.I. channel patti, G.I. bolt and nut, washer,rivets, asbestos rope, silicon paste, self thread screw, self drilling screw anchor fastner bolt and nut.

990.9) EXHAUST BLOWER BED - MS STRUCTURE as per site condition for fixing.

991) FRESH AIR BLOWER BED - MS STRUCTURE as per site condition for fixing.

991.1) S.S. L- ANGLE DRAIN CHANNEL FRAME bottom support made of S.S. angle 304 grade. SIZE: 288" X 8" (24 FEET)

991.2) S.S. DRAIN CHANNEL gratings top made of S.S. 3/4 X 3/4 square pipe 304 grade 1.6 mm thickness.SIZE: 288" X 8" (24 FEET)

991.3) S.S. DRAIN GRATINGS BOTTOM FILTERS

991.4) S.S. DOUBLE DOOR VERTICAL FREEZER CAPACITY: 380 LTRS SIZE: 27X27X78

991.5) S.S. HEAVY DUTY GRINDER , CAPACITY: 10 LTRS TILTING MODEL

991.6) S.S. HEAVY DUTY GRINDER, CAPACITY: 7 LTRS TILTING MODEL

991.7) HEAVY DUTY MIXER

991.8) Gas Line Material and Installation Charges for Dosa Plate, Single Range, Bulk Single Range & Idly Box

PTM PROJECTS PVT LTD

Johnsun Engineering Contractors

Bidder Name

PTM PROJECTS PVT LTD

Johnsun Engineering Contractors

Unic Associates