REPAIRS TO ROOF SHEETS, FALSE CEILING, JOINERY, BRICK WORK AND OTHER MISC WORKS AT HEMA LINE, THIMMAYA LINE, ROBERT BARRACK, MES COLONY AND OTHER LOCATIONS UNDER GE (MCTE) MHOW

Amount

Dismantling of Plain or corrugated steel / AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,complete all a specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Plain, galvanised, mild steel sheeting thickness 0.63mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 ,complete all a specified and as directed.

Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed.

S & F Mild Steel work confirming to Fe - 290, Grade E-165 as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs ,complete all a specified and as directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595x595x6 mm thick E-Board Designer ceiling fixing 600mmx 60mm x 6mm grid( Frame work) etc complete all a specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required ,complete all a specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty , complete all a specified and as directed. directed by Engr-in-Charge .

M&L for preparing new surfaces of walls and applying two coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L preparation of old plaster surfaces of ceiling and applying one coat of white wash ,complete all a specified and as directed.

M&L preparation of old plaster surfaces of ceiling and applying one coat of distemper ,complete all a specified and as directed.

M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.,complete all a specified and as directed.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface,complete all a specified and as directed.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls upto any height.(Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping of distempered and painted surface old plastered / decorated surface and applying one coat wall care putty and papering for smooth finished of the surfce and applying two coat of distemper oil emulsio over a coat of primer complete all a specified and as directed.

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M&L for preparation of old surface of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying one coat of Premium Acrylic smooth exterior paint complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M&L preparation of old plaster surfaces of wall and applying one coat of white wash all as directed by Engr-in-Charge .

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- all as per item no 26 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- all as per item no 28 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- all as per item no 30 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300 x 200 x 7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm/ 300X 600X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15 mm thick screed bed in CM 1:6 ,complete all as specified and directed.

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.,complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.

M &L for Cement concrete type B2, 1:4:8 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M & L coloured Rubber Moulded Chequred Cement Concrete tiles 300 x 300 x 30 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15 mm thick screed bed in CM 1:6 ,complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand,complete all as specified and directed.

M&L for providing Precast cement concrete in type B-1 , 1:2:4 (20mm graded aggregate) in Kerbs and edging to road , divider and foothpath etc incl necessary earthwork with plain fair faces, incl chamfered whethereing, throating etc and setting in cement mortar 1:4 complete with joints to match,complete all as specified and directed.

M&L for PCC 75 mm thick type B2 (1:2:4) using 40 mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for preparation of new concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint compete all as spcified and directed.

S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S & F in repair Vitreous china urinals, Half stall type,white complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws , with grating and union for discharge pipe incl 40mm waste coupling, 375mm long pvc connection and waste pipe complete all as specified and directed.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed

S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook,complete all as specified and directed.

S&F in repair 110 mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in repair stainless steel kitchen plate rack size 600 x 900 x150 mm of approved pattern made out of stainless steel sheet 0.63 mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. .

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions,complete all as specified and directed.

S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions,complete all as specified and directed.

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall ,complete all as specified and directed.

S & F in repairs Hand shower 1.5 m CP Flexible SS Tube , 5 flow Hand Shower , adjustable wall hook , rubbit cleaning system all as specified and directed.

S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets complete all as specified and directed.

S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets ,complete all as specified and directed.

S& F in repairs Flush Pipe of polyethylene of low or high density or PVC , 32 mm dia, for low level cistern ,complete all as specified and directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones,complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden / steel window in square n exc 0.5 Sqm in each pane,complete all as specified and directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane,complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all as specified and directed.

M & L in fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work ,complete all as specified and directed.

S&F in repair PVC water tank covers premium quality fitted to tank . Make - Syntex or equivalent water tanks of Cap 500 ltrs to 1000 ltr complete all as specified and directed.

S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part I ,complete all as specified and directed.

S&F in repair 500ltr capacity rotational moulded polythyiene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tankall as specified in SSR Part-I,complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 ,complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60x1mm mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60x1mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.complete all as specified and as directed.

M & L PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door framed ,complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed.

S & F 35 mm thick second class hardwood rail and style , Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:- (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall – 06 No per window.

S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and directed.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy,complete all as specified and directed.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.,complete all as specified and directed.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.,complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type,complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type,complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using old size bricks , complete all as specified

Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.Note. (i) cleaning shall be the responsibility of the contractor for the entore period of contract.

Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.Note. (i) cleaning shall be the responsibility of the contractor for the entire period of contract.

S&F, Solid PVC wall panelling consisting of 5mm thick wood grain painted PVC sheet fillet of wight 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.. (Incl: Cutting,welding,drilling holes in existing floor and welding ends on existing RCC columns.)

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres complete all as specified and directed.

M&L for 10 mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement ,complete all as specified and directed.

M&L for PCC 25 mm thick (1:2:4) type Bo using 12 mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting /making proper slope on roof/chhaja and roof kerbs/benching complete all as specified and directed.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface.NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer,complete all as specified and directed.

BHATIA ASSOCIATES

Sudarshan Associates

Chitragupta Construction

Jamna Constructions

ms shrilaxminarayan and sons

NIDHI CONSTRUCTION