General fund 2023-2024

Amount

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia 304 grade Stainless Steel pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with 304 grade Stainless steel pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Supply and fixing of stainless stell slide bench has 8 feet Chute length 5.25 feet length 18 " width sliding chute on 8 feet length using 304 grade 24 gauge stainless steel plate reiforced with 18 gauge sheet riveted togeather with including cost and conveyance of all materials and all labour charges and Transportation charges fixing on site with earth work excavation leveling course and foundation concrete and Vibrant enamel coated painting etc complete

Supplying and fixing of Spring Rider ( Elephant ) using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete

Supplying and fixing of HIP Press Rotator using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete

Supplying and fixing of Duck Meri Go round using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete

Supplying and fixing Out door Walker exercise using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete

Providing 3 seater back slope ouble polish finish black Granite sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size granite slab side walls, 1500x450x100mm size bench slab and back rest slope slab including cost and conveyance and fixing in position etc complete

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. FOR DRAIN &CULVERTS

Supply and filling crusher stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

seenuvasun c s