Name of the work:-1) Telecom arrangement in connection with augmentation / upgradation of freight wagon maintenance infrastructure facilities at KZJ / C&W/ Depot. 2)KZJ-BZA Section : Upgradation of COPs with new sheeting( SS gutter,new sheeting) & Provision of additional PF under ADEN/S/KZJ (KDM,NKD,GLA,YGL,CLE,TAA,GUU). 3) KZJ-BZA Section :Construction of additional COP under ADEN/MDR Section (IRS Type COP at CKN,BKL,YP and Bus type shelters at CKN,BKL,MTMI,TNGM,GNN,CVV). 4) KZJ-BZA Section- Proposed construction of Limited height subway(LHS) New Bridge No. 559(A) km 421/33-35 in lieu of closed Level crossing (Tresspassing Location) at Kesamudram station yard as precast RCC Box of size 1x3.00x2.65m by AIR pushing method. 5)PDPL-KRMR section: Telecom arrangements in connection with Four laning of Karimnagar-Warangal section Of NH-563 from Design Ch.48.860 km (near SH-I Ch. 170.400 km) at Manakondur bypass to Design Ch. 116,875 km (existing Ch. 144.050 Km) at palvelpulla near Hanamkonda (Design Length 68.015 km) in the state of Telangana on Hybrid Annuity Mode under Bhartrnala Pariyojana Construction of four lane RUB at Rly.chainage km 29/12-13 between Peddapalli Karimnagar stations on Peddapalli-Nizamabad section of Secunderabad division at Km.51,/225 on NH563 - Shifting of Underground OFC Telecom Cables at RUB. 6) KZJ-BZA Section - proposed Construction of New Bridge No. 548 (Additional vent way) (UP & ON line portion) as precast RCC box of size 16.00x3.OOrt1 at km 418/2-4 between Intekanne and Kesamudram stations BY AIR PUSHING METHOD USING 20.40m RH GIRDER. 7) KZJ-BZA Section proposed Construction of New Bridge NO. 550A (Additionalvent way) (UP & DN line portion) asprecast RCC box Of size 1 x6.00x3.OOm at km 418/4-6 between Intekanne and Kesamudram stations BY AIR PUSHING METHOD USING 20.40m GIRDER. -------14) DKJ-MUGR: Telecom Portion for Proposed Manning of existing 4 unmanned LC gates on lead line of KTPS siding. (14 WORKS)

Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )

Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.

Defination of Similar Work :- Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking/ Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking and Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic Interlocking stations. OR Zonal Signalling/Telecom works Indoor or Outdoor works or both.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.