Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹44.5 L+₹3,597 (0.08%)Rejected-Finance VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹45.0 L+₹53,531 (1.20%)Rejected-Finance SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L3 | Rejected-Finance Higher rate quoted | |
| 4 | L4₹45.1 L+₹68,091 (1.53%)Rejected-Finance | L4 | Rejected-Finance Higher rate quoted | |
| 5 | L5₹47.4 L+₹2.9 L (6.55%)Rejected-Finance | L5 | Rejected-Finance Higher rate quoted |
Tender Value
₹49.0 L
EMD Value
₹98,500
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_542824_1
8400-838/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹98,500
Yes
15 Nov 2022
3 Aug 2022
2 Sept 2022
3 Aug 2022
31 Aug 2022
17 Aug 2022
60 days
Amount
Surface excavation n.exc 30 cm deep and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed.
Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for hard core of broken boulders or stone gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface of broken stone complete all as specified and directed.
M&L for morrum/red bajri filling in floors or pavings, laid in layers n.exc.15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in foundation and mass filling complete all as specified and directed
M&L for fly ash brick straight or curved on plan.exc 6 mtr mean redious built in CM (1:6) complete all as specified and directed
M&L for fly ash brick straight or curved on plan to any radius, in half brick walls built in CM (1:4) complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed
Removing excavated surplus material (Soils) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; (horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed
M&L for formwork to sides and soffits of floor or roof beam,beam hauchings, girders, bressummers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams, chajja etc complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per item No 14.00 mentioned here-in-above but 6 to 8 mm dia complete all as specified and directed.
All as per item No 14.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L for rendering 15mm thick in cement and sand mortar (1:6) (Internally) on brick or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement and sand mortar (1:4) (Externally) mixed with water proofing compound @ 3% by weight of cement on brick or concrete surfaces including finished surfaces even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be meaured and paid seperately)
Supply only integral water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for rendering 5mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified and directed.
M&L for cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 sqm in floors laid over and including 15mm thick (1:6) cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.
M&L for glazed ceramic colour joint free tiles tiles in verticle surface 300x450x7mm/ 300x600x7mm thick set and jointed in neat cement slurry over and including 10 mm thick (1:3) cement mortar plaster and pointed in coloured cement to match complete all as specified and directed.
M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) 75mm thick as in sub base for receiving floor finish complete all as specified and directed
M&L for cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) 75mm thick as in plinth protection complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coat of oil bound distemper over a layer of 1.5 mm thick (minimum) wall care putty complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar)
Preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed
S&F,steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.
Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F CP bib taps 15mm dia, with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fency type complete all as specified and directed
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.
S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed
S&F vitreous China squatting pan, 'Orissa patteren, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S&F 15mm bore piller taps cast copper alloy,with capstan heads, chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT orCOLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets complete all as specified and directed.
S&F stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified.
M&L for concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, complete all as specified.
M&L for reinforced concrete pipes 150mm , class NP2 laid and joinded complete wirh collar complete all as specified and directed.
S&F waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) complete all as specified and directed
S&F waste pipe 32mm dia, complete all as specified and directed.
S&F tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed
S&F 15mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed
S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
M&L for PCC 1:3:6, D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and directed
M&L for brickwork with fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:4) with old size bricks complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified and directed
Reinforced concrete pipes, class NP2, laid and jointed complete with collars 600mm dia complete all as specified
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair complete all as specified and directed.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified.
Excavation in post holes n.exc 0.50 cum, getting out, returning filling in and ramming earth, watering and removing surplus soil n.exc 50 m in soft/loose soil complete all as specified and directed
M&L for steel work in tubular trusses Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.
M&L for chequred cement tiles 300X300x25mm thick set and jointed and pointed in neat cement slurry with gray cement and pigment and over and including 15 mm thick screed bed in cement mortor 1:6 complte all as specified.
M&L for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Excavation in trenches n.exc 1.5m wide and exc 1.5m but n.exc 3.0 m in depth for foundation etc. in soft / loose soil complete all as specified and directed.
M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in foundations, footings, foundation beams, plinth beams, bases of columns and mass concrete complete all as spcified complete all as specified and directed.
M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in columns, pillers, piers, post and struts complete all as spcified complete all as specified and directed.
M&L for M-25 (using 20mm graded stone aggregate), design mix in in Beams, cantilevers, chajja, lintels over 1.5m span complete all as specified and directed
M&L for formwork to sides piller post, struts, and columns and similar work for rough finished surfaces of concrete complete all as specified and directed
M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed
M&L for preparation of white wash on plastered surfaces of wall including preparation all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded coarse aggregate) in flooring complete all as specified and directed.
Machine cut Kota stone slab flooring 20-22 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete all as specified and directed.
Kota stone slab 20-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.
S&F factory made 35 mm thick 2nd hardwoord plain framed panelled shutters( two panel) with lock rail and panel of 9mm thick B.W.P commercial ply . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specifed.
S&F 125 mm aluminium handles, cast type, anodised complete all as specified and directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and slidibg bolts of extruded section or cast-aluminium alloy complete all as specified and directed.
S&F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.
M&L for PCC(1:3:6) type C1(using 20 mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.
S&F rolled mild steel in plates channel (plain or chequred) square cut or notched (ordinary and counter shunk)forming holes, withpout any attachment of quality FE 410-W (Gde-E-250)quality-A complete all as specified and directed
S&F roof trusses (framerd), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, anglke, channel or flat sections) including distance pieces,cleats etc of quality FE 410-W (Gde-250)quality A complete all as specified and directed.
M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes complete all as specified and directed.
M&L for PCC type B2 1:2:4 (using 40mm graded stone aggregate), in foundations, filling and mass concrete complete all as specified and directed
M&L for 200 mm thick Kankar or laterite, spread, rolled and consolidated to gradient and camber required complete all as specified and directed
M&L for 100 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ when thickness of concrete slab is 100mm complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in kerb including necessary form work complete all as specified and directed
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coat of cement based paint over a coat of cement primer over new surfaces complete all as specified and directed
M&L for preparation new surface of roof and applying two coat of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage /seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. (Notes- 1. As per description of the items minimum two coats of polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by the as per manufacture instruction.pl note no price adjustment shall be made,if more coats of (PU)acrlic based water proofing liquid compound & primer are required for roof treatment. 2. Quoted rate shall be deemed to be included for work in building/structure of any height).
M&L for rendering 10mm thick in CM (1:4) finished even and fair using with water proofing compound complete all as specified and directed
M&L for soakage wells 1.2 M dia X 3 M effective depth with excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as shown in CE's TD drawing complete all as specified and directed
Demolition of cement concrete (Unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above Ground level) including rubbish off the materials upto 100 from the site complete all as specified and directed
M&L for 75 mm thick, plain Cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in pavings, hardstandings and similar work complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation and complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with mixture of grey cement and pigments complete all as specified and directed
S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge complete all as specified and directed
S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 2000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge.
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 112.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 112.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessary connection complete all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F ventilating exhaust fan 230 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
M&L for conduit point wiring for one light point/fan point/power point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size (ERW) steel conduite heavy grade and fittings, including pressed steel terminal switch boxes and top cover (suitable for flame proof point wiring) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
S&F switch flameproof weather proof 10 Amp single pole ON/OFF complete all as specified and directed. (Make: M/s Sudhir/M/s Bajaj / M/s Crompton Greeves)
S&F Flame proof weather proof LED tube light fittings fixture 1 x 18 W, 4'ft long complete all as specified and directed. (Make: M/s Sudhir/M/s Bajaj / M/s Crompton Greeves)
S&F flameproof exhaust fan of 18" complete fixture complete all as specified and directed. (Make: M/s Sudhir/M/s Bajaj / M/s Crompton Greeves)
S&F flameproof exhaust fan louvers for 18" complete all as specified and directed. (Make: M/s Sudhir/M/s Bajaj / M/s Crompton Greeves)
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB single pole and neutral 5 to 32 amps 240 volts 10 KA , C curve complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed. (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
M&L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc complete all as specified and directed.
S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
UNIVERSAL TRADING
Hooghly Construction Co.
KAZI SAHABUL ALAM
HIGH HILLS INFRA
ROY ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .