Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹52,900
Closing Date
30 Jun 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Ramanna
Supply, Erection, testing and commissioning of 3Nos, 20 mtrs High Masts in RTPS.
KPCL/2025-26/PS/WORK_INDENT3058
KPCL/2025-26/PS/WORK_INDENT3058
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer PPS Office RTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
Intending Bidder should have satisfactorily completed as a prime contractor, at least one similar nature of work of Supply, Erection, testing and commissioning of high mast in any thermal power stations in India of value not less than Rs.13.23 lakhs, in the preceding five Financial years (2020-21, 2021-22 ,2022-23,2023-24 & 2024-25).As a proof of this the bidder shall upload work order and relevant work done certificate issued by a competent authority. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year).
Intending Bidder shall be Class-I or above electrical contractor. As a proof of this, valid Electrical license issued by Govt. of Karnataka shall be furnished.
The intending bidder in his name should have achieved an average financial turnover of Rs 26.46 lakhs in at least two financial years during the last five financial years (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25).As a proof of this, the bidder shall upload copies of profit & loss account statement or turnover certificate duly certified by chartered accountant.(Financial turnover for previous years will be given weightage of 10% per year to bring them to the present price level of the financial).
₹670
₹52,900
14 Jun 2025
14 Jun 2025
2 Jul 2025
23 Jun 2025
Supply, Erection, testing and commissioning of 3Nos, 20 mtrs High Masts in RTPS.
Fabrication, Supplying, Erection, Testing and Commissioning of 20 mtrs long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) th...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fixing hallogen / MH fittings/SVL/IL/LED floodlight fitting over existing pole/ wall ceiling including providing& fixing clapms, Bolt & nuts and wiring using suitable capacity wires.
Civil foundation for 20 Mtrs high mast including pavement all around the mast 4x5 Mtr as per details mentioned in the drawing.
Digging of trench of 0.6m deep*0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete a) In soil (ordinary)
Digging of trench of 0.6m deep*0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete a) In soil (Hard)
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.
Supply and laying of bricks in the existing trench as per the directions of site engineer.
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
SUPPLY OF 1.1 kv XLPE or heat resistant PVC insulated, PVC exutruted inner seath armoured LTUG cable as per IS-1554 (part-1) or IS - 7098 part-1, armouring strip thickness and resistivity as per IS...
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required On wall /Structure 25 sqmm to 75 sqmm
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).19/20mm.
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).32 mm.
Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm.
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm.
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Fabrication , Supplying and fixing of OUTDOOR timer panel board in 16 gauge CRCA steel duly finished with the seven tank process of siemens grey powder coated and fitted with 63A 4 pole MCB, auto manu...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint....
Analog Timer for lighting system.
Supply,Testing of Portable Welding Machine Single With all accessories.Phase:Main Voltage: 230V,1 50/60Hz,Fuse:25A,Primary current:43A,Voltage/current range(DC):8A/20V-180A/27V,Power Factor at max cur...
Sheet Metal/Deep Drawn LT Metering box with wiring arrangement for Modem and DLMS meter without CTs.
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. 63 A
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document high mast PDF FINAL.pdf
Tender Document • 0.72 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .