REPAIRS TO JOINERY ROOF PLUMBING AND SANITARY INCLUDING CONNECTED WORKS IN MD ACCN IN THE AREA OF AGE BR I UNDER GE WEST DELHI CANTT 10

Amount

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each.

S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and including 12mm dia square bar for guard bars @ 125c/c horizontally complete all as specified and directed.

All as per item No. 4 above but without glazing bars and grill.

S&F powder coated(minimum thickness of powder coating 50 micron) aluminium for three track window and aluminium section weighing more than 0.4kg/Rm of sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.

S&F powder coated aluminium frame for windows, ventilators and sliding tracks, beading for grill with one or more rebates including joining cleat for fixing etc. complete all as specified and directed (min thickness of powder coating 50 micron).

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S&F solid PVC door frame of size 50 x 47mm made out of 5mm wood grain printed PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick for hold fast. confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded pre-laminated PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined suitable PVC sheet beading and joined together with solvent cement and provision of partially louvered frame supply and fixing in the frame at site. Complete all as per specification & sample kept in GE office and as directed.

S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces as complete all as specified and directed.

S&F gauged skelton door shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc (without sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides as shutter of cupboard complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane including hacking out old broken glass all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/stainless steel wire stapple with screws complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of new surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10CM, including preparation of surfaces. complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges medium weight fixing with stainless steel screw complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked

S&F 300mm long Aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast- aluminium alloy and fixed complete all as specified and directed.

S&F hasp and staple size 75mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified.

S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane complete all as specified and directed.

S&F with 4.8mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack/stainless steel wire stapple with screws to wooden beads to wooden joinery, Cost of wooden beads / flat iron beads included in the rate, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc.and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

All as per srl item No 31 above but except brick.

M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all specified and directed.

M & L Rendering 15mm thick in Ready Mix Mortar on brick work or concrete surfaces of wall and finished even and smooth without using extra cement as a whole or in patch work as per manufacturer instruction complete all as specified and directed .

M & L Rendering 10mm thick in Ready Mix Mortar on concrete surfaces of Ceiling and finished even and smooth without using extra cement as a whole or in patch work as per manufacturer instruction including taking down old plaster complete all as specified and directed .

M&L for 10mm thick rendering in cement mortar (1:3) on ceiling surfaces of any description, finished even and smooth complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over primer and 1mm thick wall care putty all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of primer on external surfaces all as specified and directed.

M&L preparation of old plastered surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer all as specified & directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M&L preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and sopping of surface and applying two coats of oil emulsion distemper over primer and 1mm thick wall care putty complete all as specified and directed.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in repair vitreous china white european type WC with "P" or "S" trap including connection to drain pipes, traps and PVC flushing cistern with pipe 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified

Dismantling floor, hearth or wall tiling incluidng cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premishes.

M&L in repairs Glazed ceramic tiles joint free coloured of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L in repairs Non skid ceramic coloured joint free tiles 400mm x 400mm 6 to 7mm thick (square/rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L in repairs Non skid ceramic coloured joint free tiles 300mm x 300mm 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

M&L 20mm thick screed bed in cement mortar 1:6 as in sub base for Udaipur green marble complete all as specified and directed.

M&L for Machine cut Udaipur green slab 15 to 18 mm thick laid over Kitchen cooking platform and jointed in grey cement slurrry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round (Stone slab shall fixed as in one piece) complete all as specified and directed.

S&F in repairs stainless steel sink of 0.8mm thick kitchen or loboaratory with plu, washer and wates, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX16mm complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair 15mm dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.

S&F 32mm dia CP waste coupling suitable for wash hand basin and sink complete all as specified and directed.

S&F in repair CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste, complete all as specified and directed.

S&F 32mm dia flexible waste pipe 1.20 m long complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling existing water tanks capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm any grade to walls and ceiling or laying in floors

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length including fixed with cement solvent with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length including fixed with cement solvent with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) 150 mm bore rain water pipes single socketed in any length with rubber ring joints fixed to walls / spout pipe complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110mm size stack clamp made out of 25 mm X 3mm flat iron and 12mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof complete all as specified and directed.

S&F in repair 75mm size stack clamp out of 25 mm X 3mm flat iron and 12mm dia round iron stays incl bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.

Disconnecting existing tanks for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. upto 500 litre complete all as specified and as directed.

M&L for flush pointing to bricks laid flat or brick tiles in pavings / roof in C:M 1:3 mixed with 5% crude oil by weight of cement including rackiing out of existing joints of brick tiles complete all as specified & directed.

M&L for 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted in CM 1:3 and including flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska including dismantling old brick tiles complete all as specified & directed.

All as above but except new brick tiles

Demolition of cement concrete (unreinforced) of any description and in any position not other specifically provided for and removal of rubbish outside MoD land complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping, kerbs, bed plates incl weathering slightly rounded or chamfered angle and throating complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 121645.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

M/S Yamin