MTPS I CA CWS II Unit III and IV Reconditioning of released FRP fan blades 2 Sets for Cooling Tower ID fans of stage II

Amount

Charges for loading, unloading of 1 Set of FRP fan blades (Cooling Tower ID fans of stage-II) from MTPS-I central stores to outside workshop for reconditioning works and return back the same from outside workshop to MTPS-I central stores after completion of reconditioning works. (2 sets = 16 Nos)

Charges for cleaning of blades with wire brush and acid washing. grinding and removing of existing resin, putty and chopped strand mat over the arm and blade surface of entire blade.

Charges for smooth leveling by grinding and sander machine, applying putty on the arm and blade surface, smooth leveling by emery sheet. After that the chopped strand mat to be wounded on the blade and arm surface area mixed with Isobathic resin, catalyst, Accelerator & pigment as recondition work. [Cost of Isobathic resin, catalyst, accelerator and pigment are on contractor scope]

Charges for applying two coats of Isobathic resin for smooth finishing over the entire surface of blade, weighing of blade should be maintained 65 Kgs+/- 0.5 and marking the weight. [Cost of Isobathic resin on contractor scope]

Charges for painting with two coats of epoxy grey Paint over the surface of the FRP blades.

Cost of Putty for Sl.No.3

Cost of Chopped strand mat for Sl.No.3

Cost of FRP compound [Isobathic Resin] for Sl.No.3&4

Cost of Accelerator for Sl.No.3&4

Cost of Catalyst for Sl.No.3&4

Cost of Pigment for Sl.No.3&4

coat of Epoxy grey paint for SL.No.5

Cost of Epoxy Thinner for SL.No.5

Hire charges for Transporting (Vehicle charges)

Consumables & T & P's charges for S.No.1 to 5

SS ENGINEERING CONTRACTOR (BID ID -1469679)