Facelift of toilets at Puducherry Airport. SH Civil and Electrical works

Amount

SH: CIVIL WORKS Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kind of soil.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a) For thickness of tiles 10 mm to 25 mm.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. a) In cement mortar

Dismantling and taking away of W.C., urinal Pan, Urinal partition, Wash basin etc., of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling and taking away of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling and taking away angle valve, Health faucet, Pillar cock, Bib cock, Bottle trap etc., in toilets as per the directions of EIC.

Dismantling and taking away doors, windows and clerestory windows (steel or wood or PVC) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.

Dismantling granite slab laid in cement mortar including stacking of serviceable material and disposal of unserviceable material with all leads and lifts

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : a) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Providing and laying PVC in sewer line, vent pipe conforming to IS. Joining as per standards as directed by EIC with required adhesive special etc. complete as per the direction of Engineer-in-charge. 110mm dia (working pressure 6kg/sqcm).

Providing and laying PVC in sewer line, vent pipe conforming to IS. Joining as per standards as directed by EIC with required adhesive special etc. complete as per the direction of Engineer-in-charge. 160mm dia (working pressure 6kg/sqcm)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including cutting and making openings for fixing the wash basins and nosing of edges of granite slabs at all exposed edges all complete as directed by the EIC :-Granite of any colour and shade. Area of slab over 0.50 sqm (Sample of granite stone shall be approved by the Engineer in Charge)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Non-Skid Vitrified Tile (Sample of tiles shall be approved by the Engineer in Charge) a) Size of Tile 600x600 mm.

Providing and laying Vitrified tiles in different sizes (minimum thickness 9.6mm), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, dado, walls over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. (Sample of tiles shall be approved by the Engineer in Charge) a) Size of Tile 600x600 mm.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing wall mount type water closet (European Type) of make "KOHLER" (Code 8752IN-S-0) or equivalent with seat cover all complete as per the directions of EIC

Providing and fixing white vitreous urinal of approved make of KOHLER (code 4978IN-ER-O) or equivalent with fittings, clamps all complete including cutting and making good the wall and floor wherever required etc complete as per the directions of the Engineer-in-charge.(Without sensors)

Providing and fixing below counter oval shaped wash basin (code 2210IN-0), brass pillar taps of make KOHLER (code 11568IN-4-CP), 32 mm C.P. brass waste of standard pattern of approved make like KOHLER or equivalent of white colour including cutting wherever required etc complete as per the directions of the Engineer-in-charge.

Providing and fixing inwall tank (European Type) of make "KOHLER" (code 77027IN-M-NA) all complete as per the directions of EIC

Dismantling of white metropole flush valve near the site and disposal of unserviceable materials within 50 metre lead

Providing and fixing KOHLER make flush cover (Code: KLR-SW-8854) CP Bevel in wall tank face plate to the existing KOHLER make water closet (European Type) with necessary fittings complete as per the direction of EIC

Providing and fixing Bottle trap of made "KOHLER" (code 7314IN-CP) or equivalent all complete as per the directions of EIC

Providing and fixing C.P brass angle valve of make "JAQUAR" (code OPP-CHR-15053PM) -15 mm Nominal bore complete as per the direction of EIC

Dismantling of uplasticised PVC connection pipe 45 cm length-15 mm nominal bore with brass unions near the site and disposal of unserviceable materials within 50 metre lead

Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length 15mm nominal bore

Providing and fixing Pillar cock of made "JAQUAR" (code PSR-CHR-031) or equivalent all complete as per the directions of EIC

Providing and fixing C.P brass health faucet of make "JAQUAR" (code ALD-CHR-573) with 1m flexible hose complete as per the direction of EIC

Providing and fixing of urinal sensor of make "KOHLER" (Code 24199IN-C01-CP) as per the directions of the engineer-in-charge

Providing and fixing C.P brass bath grip of make "JAQUAR" (code WAC-SAP-BAD090CS) complete as per the directions of EIC.

Providing and fixing C.P brass toilet paper holder of make "JAQUAR" (code ACN-CHR-1151N) complete as per the direction of EIC

Dismantling of toilet paper holder C.P. brass near the site and disposal of unserviceable materials within 50 metre lead

Providing and fixing of soap dispensers of capacity 1000ml of make "DIVERSEY" as per the directions of EIC

Dismantling of 100 mm Stainless steel grating for gully trap near the site and disposal of unserviceable materials within 50 metre lead

Providing and fixing S.S floor gratings of make "VIKING" of size 150 mm X 150 mm with garting opening size 100 mm dia as per the directions of EIC

Dismantling of fixing beveled edge mirror of superior glass 5mm thick with 6 mm thick hard board near the site and disposal of unserviceable materials within 50 metre lead

Providing and fixing 6mm thick beveled edge mirror of make SAINT GOBAIN or equivalent with 6 mm thick plywood backing fixed to walls with stainless steel studs of adequate size etc complete as approved by the EIC.

Providing and fixing of urinal partition of make "JAQUAR" (Code JSE - CHR - 810US450X) as per the directions of EIC

Providing and fixing white vitreous china water closet squatting pan (Indian type) : a) Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. a) 10 litre capacity - White

Providing and fixing C.P.Brass two way Bib cock of jaguar (OPP-CHR-15041PM) or equivalent ,as per the direction of Engineer-in-charge. a)15 mm dia

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: a) White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Flexible pipe - 32 mm dia

Dismantling of P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings Flexible pipe 32 mm dia near the site and disposal of unserviceable materials within 50 metre lead.

Providing and fixing Stainless Steel towel rail Jaquar make (ACN-CHR-1111SM) or Equialent complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Dismantling of Stainless Steel towel rail 600 mm long towel rail near the site and disposal of unserviceable materials within 50 metre lead.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). a) Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) Second class teak wood a) 35 mm thick shutters

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

SH: ELECTRICAL WORKS SH: I - Internal Electrification works Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet ( Shutter type) and 5/6 amps modular switch, connection etc., complete as required (Make: As per List of Preferred makes).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 15/5A modular socket outlet (Shutter type) and 15/5 A modular switch with indicator, connections etc., complete as required (Make: As per List of Preferred makes).

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)

Supplying and fixing following modular switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 A Switch

Supplying and fixing 6-32 A, 10kA, "C" curve, Single pole, single Phase miniature circuit breaker suitable for operation on 230 +/- 10% , 50 Hz, AC supply in the existing MCB DB, interconnections, testing and commissioning etc., complete as required (Make: As per List of Preferred makes).

Supply of Recess mounted, 18W (Min), 4000K, IP ≥ 20, CRI 80 (Min), Warm White LED round adjustable down lighter fitting with COB LED including electronic driver, clear diffuser, Aluminium heat sink, aesthetic finish, suitable for operation on 230 V +/- 10%, 50 HZ AC supply etc., complete as required and meeting technical specification (Make: As per List of Preferred makes).

Supply of Recess mounted, 15W (Min), 4000K, IP ≥ 20, CRI 80 (Min), Warm White LED round adjustable down lighter fitting with COB LED including electronic driver, clear diffuser, Aluminium heat sink, aesthetic finish, suitable for operation on 230 V +/- 10%, 50 Hz AC supply etc., and meeting technical specification (Make: As per List of Preferred makes).

Supply of Recess mounted, 12W(Min) 4000K, IP ≥ 20, CRI (Min 80), Warm White LED round adjustable down lighter fitting with COB LED including electronic drive, clear diffuser, Aluminium heat sink, asthetic finish, suitable for operation on 230 V +/- 10%, 50 Hz AC supply etc., and meeting technical specification (Make: As per List of Preferred makes).

SITC of 15W (Min)/ mtr, IP ≥ 20, Flexible LED Strip with electronic Driver suitable for providing Indirect Lighting in surface/Ceiling including fixing LED strips on smooth, clean and dry surfaces with 3M adhesive mounting Tape. LED strip should have minimum 120 No's LED per Meter or as PER OEM specification and LED strip colour shall be as approved by EIC and suitable for operation on 230V, 50HZ power supply etc., complete as required.

INSTALLATIONS OF LIGHT FIXTURES Installation, testing and commissioning of pre-wired, LED fitting with driver complete with all accessories directly on ceiling/ wall/ surface including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc., complete as required.

SITC of fully automatic Hand drier, aesthetic finish, body of material shall be Stainless steel/ABS, Water splash proof, drying time <20 secs complete with single/twin blower, Heater coil, infra red sensors etc of power consumption >2000 W capacity suitable for operation on 230 V +/- 10 V, 50 HZ, AC supply etc., complete as required (Make: As per List of Preferred makes).

SH: II - Automatic Sliding doors Supply, Installation, testing and commissiong of Automatic Sliding Door Operator, Touchless Non Contact Switch for Special Rest Room package, 3075mm operator, suitable for operation with Single Sliding Panel of width 1200mm, height 2400 mm and compliant with European/Indian/OEM standards, as approved by EIC and meeting technical specifications, suitable for operation on 230V + /- 10%, 50Hz, AC supply etc., complete as required (Make : Dormakaba Automatic ES 250 PRO EASY / Equivalent)

Supply and fixing of Plywood wooden door of size 1200 X 2400 X 35mm (appx.) with 1mm thick Sunmica finish etc., complete as required including complete integration with automatic sliding door operator etc., complete as as required.

J.P.M. Building Construction and Interior Works (BID ID -761976)

RECHI CONSTRUCTION PVT LTD (BID ID -761930)

M/S SRI MARUTHI CONSTRUCTIONS (BID ID -760561)

S.Srinivasan (BID ID -760753)

CREATORS ENGINEERS AND INTERIORS PVT LTD (BID ID -762036)