LED isation OF CONVENTIONAL SECURITY LIGHTS BLDGS LIGHTS AT AKHNOOR

Amount

Taking down carefully including fixtures and fittings any size any type such as tube light fittings, bulk head fitting, and holder etc, complete all as specified and directed.

Supply and fixing integral surface mounted box type sleek LED fitting fixture (4 feet length), with polycarbonate LED Rod 18 watt with integral electronic driver complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size cable incl testing after fixing all as specified and directed by Engr - in-charge . The specification of the light fitting should meet the following:- (a) Housing of Light fitting : Aluminium batten with polycarbonate LED rod (b) Operating voltage : 180V to 270V (c) Operating temperature : -0 to 45 degrees (d) Lumen efficacy : 130 lumen per watt (e) system lumen : Not less than 1800 lumens (f) Colour temperature : Not less than 5700-6500k (g) Surge voltage protection : Up to 2 KV (j) Ingress protection : IP20 (k) Total harmonic distortion : not less than 20% (l) Power factor : not less than 0.90 (m) Input Frequency : 50 HZ (n) Line protection : Under/ Over voltage protection

Supply and Fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete incl testing after fixing all as specified and directed by Engr-in-charge.The specification of the light fitting should meet the following:- (a) Housing of Light fitting : aluminium Extruded (b) Operating voltage : 150 v to 240v (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) System lumen : Not less than 900 lumens (f) Colour temperature : Not less tha 5700k (g) Surge voltage protection : Up to 2 KV (h) Ingress protection : IP20 (j) Total harmonic distortion : not less than 20% (k) Power factor : not less than 0.90 (l) Input Frequency : 50 HZ (m) Line protection : Under/ Over voltage protection

Supply and Fixing of 36 watt 2x2 panel Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/ Grid ceiling Delivers excellent illumination & comfort in high ceiling areas Long life, High transmittance PMMA opal diffuser for glare free symmetric light distribution.Powered by an Built-In electronic driver (SMPS based constant current supply) complete, making connection and testing after fixing all as specified and directed by Engr-in-charge .The specification of the panel light fitting should meet the following:- (a) Housing of Light fitting : CRCA Powder Coated white after phosphochromate treatment. (b) Operating voltage : 150 V to 240V (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : Not less than100 lumen per watt (e) System lumen : Not less than 4250 lumens (f) Colour temperature : Not less tha 5700K (g) Surge voltage protection : Up to 2 KV (h) Ingress protection : IP20 (j) Total harmonic distortion : not less than 10% (k) Power factor : not less than 0.90 Line protection : Under/ Over voltage protection (l) Input Frequency : 50 HZ

Supply and Fixing of 10 watt Bulkhead Designed with beautiful aesthetics using new generation technology in LED to enliven your outdoor and indoor areas in perfect synchronization with functionality and aesthetics. Family of bulkhead Lights designed to compliment thegeometry of the area with modern design complete, making connection and testing after fixing all as specified and directed by Engr-in-charge.The specification of the panel light fitting should meet the following:- (a) Housing of Light fitting : Die cast Aluminium (b) Operating voltage : 140V to 270V (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) System lumen : Not less than 900 lumens (f) Colour temperature : Not less than 5700K (g) Surge voltage protection : Up to 4 KV (h) Ingress protection : IP65/IP66 (j) Total harmonic distortion : not less than 20% (k) Input Frequency : 50 HZ

Supply and Fixing of LED Lamp retrofit type 12 watt B22 base holder with polycarbonite body and heat sink type complete all as specified and directed by Engr-in-charge . The specification of the LED bulb should meet the following:- (a) Housing of Light fitting : Polycarbonate (b) Operating voltage : 150V to 300V (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) System lumen : Not less than 1200 lumens (f) Colour temperature : Not less tha 6500 k (g) Surge voltage protection : Up to 2.5KV (h) Ingress protection : IP20 Base B22 (j) Total harmonic distortion : not less than 20% (k) Power factor : not less than 0.90 (l) Input Frequency : 50 HZ (m) Line protection : Under/ Over voltage protection

Supply and Fixing of Inverter based LED tube light fitting, 20/22 watt, indoor decorative high lumen batten and connecting up with twin core twisted flexible copper wire complete and testing after fixing all as specified and directed by Engr-in-charge . The specification of the fitting should meet the following:- (a) Housing of Light fitting : Aluminium Extruded (b) Operating voltage : 150 v to 270v (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : Not less than 95 lumen per watt (e) System lumen : Not less than 1900 lumens max (f) Colour temperature : Not less tha 6500k (g) Surge voltage protection : Up to 2 KV (h) Ingress protection : IP20 (j) Total harmonic distortion : not less than 20% (k) Power factor : not less than 0.90 (l) Input Frequesncy : 50 HZ (m) Reachargeble battery : 2600 mAH (n) Battery Backup up to 3 HRS (o) Line protection : Under/ Over voltage protection

Taking down carefully copper/aluminum submain wiring any size/ any type from switch board to connected fitting/fixture, complete all as specificed and directed

Sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through existing recessed rigid PVC conduit of size 20 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and Chiselling ,complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing, complete all as specified and directed.

Point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting GI box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.2mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface for One light point/fan /bell point controlled by one switch, complete all as specified and directed.

Supply and Fixing in Modular type switch 6 amps, single pole , 1 way, 1 module , 240 V, ISI marked, complete all as specified and directed

Supply and Fixing in Ceiling rose, 3 terminal ,PVC/polycarbonate body, ISI marked, complete all as specified and directed

Dismantling/Taking down old conventional light fittings/lamps/bldg lights of any type and making good to the disturbed surfaces all as specified.

Taking down UNSV brackets for street /bldg lights of any size and shape including all accessories all as specified and directed.

Supply and fixing of 25 watt street light Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management,sturdiness, excellent corrosion resistant,New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07, isolated electronic LED driver (SMPS based constant current supply) complete, making connection and testing after fixing all as specified and directed by Engr-in-charge. The specification of street light fitting should meet the following:- (a) Pressure die-cast aluminium alloy for housing (b) Operating voltage : 150V to 270V (c) Operating temperature : -10 to 45 degrees (d) Lumen efficacy : Not less than 95 lumen per watt (e) System lumen : Not less than 1900 lumens (f) Colour temperature : Not less than 5700K (g) Surge voltage protection : Up to 4 KV (h) Ingress protection : Not less than IP65/IP66 (j) Total harmonic distortion : not less than 10% (k) Power Factor : not less than 0.90 (l) Average Life :-50000 hrs (m) Line protection : Under/ Over voltage protection

Supply and fixing of 48 watt street light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10 KV Built-in Surge Protection Device lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07, isolated electronic LED driver (SMPS based constant current supply) complete in making connection and testing after fixing all as specified and directed by Engr-in-Charge . The specification of street light fitting should meet the following :- (a) Pressure die-cast aluminium alloy for housing (b) Operating voltage : 150V v to 270V (c) operating temprature : -10 to 45 degrees (d) Lumen efficacy : >not less than 100 lumen per watt (e) system lumen : Not less than 4800 lumens (f) Colour temprature : Not less tha 5700 K (g) Surge voltage protection : Up to 4 KV (h) Ingress protection : IP66 (j) Total harmonic distortion : not less than 10% (k) Power Factor : not less than 0.90 (l) Average Life :-50000 hrs (m) Line protection : Under/ Over voltage protection

Street light bracket for street light fittings made to shape as directed of G.I. pipe light grade 32mm bore 1.5 m long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size, complete all as specified and directed.

Deduction to be made from BOQ for Sch 'A' Part-II (Schedule of credit) Amont of Rs. 931624.00 during AOC. Note: Tenderers shall not quote for this schedule.

Electromechanics Engineers & Contractors

JCC ENGINEERS PRIVATE LIMITED

M/S SURINDER KUMAR MAHAJAN

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

R D Bansal

M/S KAPIL KUMAR KHATTAR

MOHAN LAL AND SONS

kailu construction co

PROACH ASSOCIATES BUILDERS & ENGINEERS