REPAIRS TO CERTAIN ROADS AND ROAD FURNITURE AT AF STN ARJANGARH UNDER GE AF GURGAON

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, exceeding 50 mm deep but not exceeding 100 mm deep, in area not exceeding 400 Sqm stacking complete all as specified and directed.

M&L 150 mm thick (Compacted thickness) Water bound macadam (WBM) in two layers with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), using granite, trap or basalt, spread, watered and rolled with 8 to 10 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.

All as per Srl item No 2.00 here in before but except materials.

M&L preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L 30 mm thick consolidated thickness Bituminous Premixed semi dense ashphaltic concrete with 5.5% binder content by weight of total mix laid with self propelling mechanical paver and hot mixed plant, rolled and compacted to required camber and gradient with power roller using paving bitumen VG -30 over and including a tack coat of bitumen VG-10 (paving) applied evenly @ 10kg/10 Sqm to unsurfaced WBM surface complete all as specified and directed. Note:- (a) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the contractor and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% givne herein above shall be provided. (b) The premix semi-dense asphltic concrete shall be procured form computerized hot mix plant as approved by GE. ( c) The vintage of sensor paver shall not be more than 05 years.

M&L preparing black top surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Repairs to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal (including supply of road metal) rolling and well ramming surface of road and apply a tack coat of Bituminous Primer @ 5 Kg/ 10 Sqm of grade VG 10 for laying semi dense complete all as specified and directed.

M&L 30 mm thick consolidated thickness Bituminous Premixed semi dense ashphaltic concrete with 5.5% binder content by weight of total mix laid with self propelling mechanical paver and hot mixed plant, rolled and compacted to required camber and gradient with power roller using paving bitumen VG-30 over and including a tack coat of bitumen VG-10 (paving)applied evenly @ 5kg/10 Sqm to existing black top surface complete all as specified and directed. Note:- (a) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the contractor and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% givne herein above shall be provided. (b) The premix semi-dense asphltic concrete shall be procured form computerized hot mix plant as approved by GE. (c) The vintage of sensor paver shall not be more than 05 years

M&L premix bituminous macadam using paving bitumen grade VG-30 with bitumen content @ 4% by weight of total mix using hot mix plant and mechanical paver laid/rolled and compacted to required gradient and camber with 8-12 ton power road roller and rolled to a uniform smooth surface (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for Road marking Strips, lines, dashes, arrows, letters etc of 2.5mm thick (reflective type) on new road / pavements and the like surfaces, exceeding 10cm wide with hot thermo plast material @ 5kg / Sqm of white or golden yellow, by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface, complete all as per MORTH Specifications and as directed.

S&F road stud of size 100 x 100 x 20 mm height / 100 x 90 x 18.65 mm height reflector size 69.34 x 23.85 mm as per IRC -67 (cateyes) globe with ABS plastic body, panel of bio-convex panel 45 special glass Reflectors Elements, fixed with approved adhesive and nails in true alignment, complete all as per manufracuture instructions complete all as specified and directed.

S&F solar road stud as per IRC -67 (cateyes) of size 136mm dia and 65mm height with led (red/white) made of polycarbonate material with twin moulded shanks, fixed with high intensity grade retro reflective lens, battery and solar panel complete all as per manufracuture instructions complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface complete all as specified and directed.

S&F Solar Metal-Pipe-Delineator as per IRC-67 with pole made of powder coated MS tube of 50mm dia and 3.65mm thick, height of pole 1000mm, solar body made of ABS plastic of size 75x80mm, fixed with bolts / epoxy glue as per manufacturers instructions and complete all as specified and directed.

S & F Fixed delineator as per IRC-67 made of powder coated MS tube 75mm dia and 3.65mm thick, height of pole 750mm, base 200mm with 3 Nos reflective strips fixed with bolts / epoxy glue as per manufacturers instructions complete all as specified and directed.

M&L Cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate for foundations, fillings and mass concrete complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep in hard/dense soil and getting out concrete complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and directed.

M&L for 25 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for coloured, pressed machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 100 mm thick, M-50 grade to match with grey cement and pigment etc complete all as specified and directed.

M&L for factory made pre-cast Kerb stones of cement concrete 1:2:4 (20mm graded stone aggregates) size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface pointed and jointed in CM 1:4 etc complete all as specified and directed.

M&L for preparing new concrete surface and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed.

Fixing only road stud of size 100 x 100 x 20 mm height / 100 x 90 x 18.65 mm height reflector size 69.34 x 23.85 mm as per IRC -67 (cateyes) globe with ABS plastic body, panel of bio-convex panel 45 special glass Reflectors Elements, fixed with approved adhesive and nails in true alignment, complete all as per manufracuture instructions complete all as specified and directed. (Note:- Road Stud to be supplied through Schedule B)

Fixing only solar road stud as per IRC -67 (cateyes) of size 136mm dia and 65mm height with led (red/white) made of polycarbonate material with twin moulded shanks, fixed with high intensity grade retro reflective lens, battery and solar panel complete all as per manufracuture instructions complete all as specified and directed. (Note:- Solar Road Stud to be supplied through Schedule B)

Fixing only Road saftey convex mirrors 1000mm made up of Polycarbonate mirrors, body of ABS/Fiber/Plastic, material suitable for indoor/outdoor use with hood complete with mounting hardware including necessary excavation and PCC 1:2:4 (20mm thick aggregate) work, complete all as specified and directed. (Note:- Road saftey convex mirrors to be supplied through Schedule B)

M/S SURINDERAS CONSTRUCTION CO.

UNIQUE BUILDERS

Som Builders

M/S Rohit Enterprises

PBS Construction Co

R K GOEL ABHEY KUMAR JAIN

M/S Parshant Associates

s r enterprises

MOHIT ENTERPRISES

Ish Engineers and Contractors

PAWAN KUMAR