PROVN OF STORE ROOM AT ENGR REGT, PROVN OF PARKING FACILITIES NEAR MAIN OFFICE COMPLEX AND MT AREA OF CIB AT NORTHERN POCKET AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and exc 1.5m but n.exc 3.0 m in depth for foundation etc. in soft / loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in foundations, footings, foundation beams,plinth beams,bases of columns and mass concrete complete all as specified and directed

M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in columns, pillers, piers, post and struts complete all as spcified.

M&L for M-25 (using 20mm graded stone aggregate), design mix in in Beams, cantilevers, lintels over 1.5m span complete all as specified and directed

M&L for formwork to sides concrete foundations , bases of coumns , sides and soffits (if any) of foundation and plinth beams, and similar work complite all as specified for flat rough finished surface complete all as specified and directed.

M&L for formwork to sides piller post ,struts, and columns and similar work complite all as specified for flat rough finished surface complete all as specified and directed.

M&L for formwork to sides and soffits of beams lintel over 1.5m span for flat and rough finished surface of concrete

M&L for TMT deformed steel bars 10mm dia & over, cut to length, bend to shape required including cranking, bending and binding with and including mild steel wire annealed n. less than 0.9mm dia complete all as specified and directed.

M&L for TMT deformed steel bars 5mm dia & over upto and including 10mm dia in stirups, spacers and binders cut to length bent to shape required including cranking, bending and binding with and including mild steel wire annealed n. less than 0.9mm dia.or securing with clips complete all as specified and directed

M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed

M&L for fly ash brick straight or curved on plan.exc 6 mtr mean redious built in CM (1:6) complete all as specified and directed

M&L for 15mm thick rendering in CM (1:6) on internal surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed (Note: water proofiing item to be paid separately)

Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for moorum filling in floors or pavements, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded coarse aggregate) in flooring complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-22 mm thick, laid over & including 20 mm thick cement mortar (1:6) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete all as specified and directed

M&L for kota stone slab 20-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F plain, framed, panelled shutters 35 mm thick of 2nd class hardwood (two panels), with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part- I) kiln seasoned and chemically pressure treated and supplied and fitted to chowkats as directed by the Engg-in-charge.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality with oil putty in square n.exc. 0.5m in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of 100mm long complete all as specified and directed

S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and slidibg bolts of extruded section or cast-aluminium alloy complete all as specified and directed.

M&L for framed work such as grills ,grating,etc,with ends of bars shouldered and or riveted or forged into spike ;framed guard bars for windows and iron gate conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F mild steel flat iron as in hold fast clamps small articles conforming to Fe -290, Gde -E- 165 complete all as specified and directed.

S&F rolled mild steel in plates channel (plain or chequred) square cut or notched (ordinary and counter shunk)forming holes, withpout any attachment of quality FE 410-W (Gde-E-250) quality-A complete all as specified and directed

S&F roof trusses (framerd), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel, or flat sections) including distance pieces,cleats etc of quality FE 410-W (Gde-250) quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces and as all specified

S&F pre painted galvatume aluminium zinc coating 150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with self tapping screws complete all as specified and directed

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed

S&F pre painted galvatume aluminium zinc coating 150 GSM GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded coarse aggregate) in plinth protaction finished even and smooth with out using extra cement complete all as specified and directed

S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated soil n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

S&F aluminium anodised snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed by Engr-in-charge.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for non asbestos 6mm thick designer fibre cement building boards fixed in ceiling or laid/inserted to timber/GI/Aluminium framework with screws as per manufacture instruction all as specified and directed by Enger in Charge.

Removing excavated surplus soil exc 250 mtr but n.exc. 500 m and depositing where directed complete all as specified and directed.

M&L for machine pressed prepainted polished precast concrete interlocking paver block any hape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade complete all as specified.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for providing, cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for preparation on newly plastered surfaces on wall and applying two coats of cement based paint over priming coat of alkali resistant priming paint ,complete all as specified and as directed.

Excavating over areas, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for PCC (1:4:8) 100 mm thick Type D2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing cement concrete surface for receiving floor finishes complete all as specified and directed.

M&L for PCC (1:2:4) 100 mm thick Type B1 (using 20 mm graded stone aggregate) used as in floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.

M&L for fixing PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Taking down Chowkhats or frames with shutters n.exc. 1.5 sqm each complete all as specified and directed

Taking down Chowkhats or frames with shutters exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed

S&F coloured Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the direction of Engg-in-charge.

S&F coloured powder coated anodised three track aluminium window shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for framed work as in MS window grills, gates of angle or other section Fe 410 -W (Gde-E- 250) quality- A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

S&F 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work complete all as specified and directed.

M&L for finishing walls with Distempering walls with 02 coats of Oil Bound Distemper over a coat of alkali resistant priming paint including preparation of newly plastered surface of concrete complete all as specified and directed.

S&F factory made UPVC white colour casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Note: Glass shall be paid separately).

M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

M&L for machine pressed prepainted polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigments complete all as specified and directed.

M&L for PCC (1:2:4) Type B0 (using 12.50 mm graded stone aggregate) used as in copings complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

E/M PORTIONS Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 77.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 6 Amps, one way complete all as specified.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F 20 W LED ultra slim light fittings, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as directed.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. (Make - Bajaj/Crompton/Phillips)

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCCB 4 pole, 3 phase, 415 volt of capacity 63 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed. (Make :- L&T or eqvt).

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F XLPE insulated armoured cable, 16 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed .( For Same Board only)

S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

S&F Bell push , flush type , 5 amp complete all as specified.

S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

S&F socket outlet modular type 2/3 pin , two module, single phase with MCB 32 Amps, complete all as specified and directed by Engineer-in-charge.

S&F modular power unit, 25 Amps, ISI marked, 240 Volts complete all as specified.

S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

S&F in repair 01x 20 W LED batten light fittings, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed.

S&F in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

S&F in repair wall mounted type decorative Havells sana LED light with LED 9 watts bulb, Havells SANA , 50Hz complete with all accessories complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.

S&F LED bulb 7 watts, inverter type with 4 hours backup, 240 volts, ISI marked complete all as specified.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F in repairs MCB SP, 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 18 KA complete with proper copper thimbles, copper reducer etc all as directed.

S&F heavy duty metallic Exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface as per existing surface complete with fixing connected with twin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed

Taking down ceiling fan for repair unserviceable parts bush, bearing, burnt rewinding replace with new copper rewinding. After repair hanging ceiling fan at same place complete all as specified and directed.

S&F XLPE insulated armoured cable, 35 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.

SAIBABA ENTERPRISE

subash chander bahl

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

FRIENDS CONSTRUCTION