Providing lighting and power outlets for walking track at Dhyan Chand Sports Ground in MANUU Campus Gachibowli, Hyderabad

Supply of the following sizes of armoured XLPE insulated Aluminium conductor cable of 1.1 KV grade confirming to IS 7098 (Part I) 1988 & part II amended up to date with ISI mark complete as required. 4 X 16 sq. mm

Supply of the following sizes of armoured XLPE insulated Aluminium conductor cable of 1.1 KV grade confirming to IS 7098 (Part I) 1988 & part II amended up to date with ISI mark complete as required. 4 X 6 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and fixing of weatherproof four (04) module MCB enclosure box including fixing of one four pole 40A D-Curve MCB with IP65 protected, Bottom entry type complete with internal wiring and connection, as required.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. (For mounting 04 module MCB Enclosure Box)

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Shifting and Erection of existing round G.I. pole set complete in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.