Rehabilitation of different reaches of various canals of Sidhmukh Irrigation project sub-project. District Hanumangarh

Amount

Uprooting Juli Flora /sarkanda Uprooting Juli Flora /sarkanda, pahari kikar or arrows upto 0.50m. depth below ground level.

Bush or jungle clearance from side slopes of lined channels with Khurpa.

Collection of kattals, brick bats etc. from bed including stacking of collected material out side of the canal.

Construction of Bench Mark muttam of size 30x30x75 cms in cement concrete (1:3:6) with 750 mm long 25x25x4 mm. MS angle iron embedded including cost of material, curing, transportation and fixing at site with all leads and lift complete.

Dismantling upto 1.5m in foundation and/or 1.5m above ground level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [MoRTH Specification clause 202] Removing hume pipes class NP3/NP4 Above 900 mm dia

Dismantling upto 1.5m in foundation and/or 1.5m above ground level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [MoRTH Specification clause 202] Dismantling Brick/Tile work In cement mortar

Dismantling of lining and disposing of the material with in 1/2 km lead double tile lining

Earth work excavation in ordinary soil for main canal and branches having discharge 10 cumecs and above; Kassi work undressed.

Earthwork rehandling undressed, Kassi work.

Add extra for earth taken from private land, land to be arranged by the contractor through private negotiations. Item applicable on certification by Ex. En. that no earth is available within canal boundary. for uncommand area

Dressing of earthwork.

Extra on earthwork for laying in 15 to 25 cms layers including Dressing and Watering as per specifications (Water to be made available by the department at one place of work site).

Compaction of earthwork by mechanically operated Vibro-Compactor/ any other mechanical means to attain a density 95% of Maximum Dry Density.

Rubbing and clearing the surface of existing brick/ tile lining to be used as subgrade both in bed and side slopes by means of wire brushes water/ air applied under pressure through nozzle to get rid of dirt, sand etc. deposited on it, complete in all respect, as per specifications and the instructions of the engineer incharge for preparation of surface.

Providing and Laying M15 Grade Single PCC Block (30x15x5 Cms.) Lining consisting of :- (i) 12mm thick plaster in CM (1:6) on subgrade. (ii) 16mm thick sandwich plaster in CM (1:3) over the plaster at item no. (i) above. (iii) 50mm thick Blocks in CM (1:3) with 6mm thick CM layer including curing upto completion of lining section as per design and specifications. On Side Slope including dressing of sides, scafolding and template allowance, Pummping charges of water to lining heading from source and curing upto 28 days.

Providing, Laying and spreading of HDPE geomembrane confirming to IS specifications, on sub grade including jointing and cost of jointing material. HDPE 300 Micron

Earthwork in foundations trenches, lift upto 1.5 m. stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15 cm. layers when required into sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 30 m. (For Dowel Earthwork) In ordinary soil like sandy loam, soft clay etc.

Providing and Laying in position cement concrete for Canal Dowel foundation, including curing, compaction and cost of centering and shuttering in grade M10, 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

Providing and Laying in position cement concrete for Canal Dowel, including curing, compaction and cost of centering and shuttering in grade M15, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.

Dressing of dowels in addition to payment for dressed earthwork if top width of dowel is less than 1 metre.

S & F in position precast R.C.C. stone (M-15 mix) of standard IRC design including finishing in cement sand mortar 1:3, painting with enamel paint, printing letters and numerals etc. complete (MoRTH specifications clause : 800) Guide stones

Supply of informatory reflective sign boards made out of 2 mm thick M.S. sheet, stove enamelled paint as per IRC - 67 (latest revision) fixed on angle iron of size 65 x 65 x 6 mm of 3 m long. 600 x 600 mm size parking sign

Providing and Laying Brick masonry for Canal Dowel with brick of class designation 75, in Cement Mortar 1:4

Carriage of Bats Ballast, Kankar, Sand, Bajri, Stone, Grit, Murram, Soling Stones For Road, Water, Good Earth. 1 KM Katcha

Earth work in excavation for foundation of structure complete with all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250mm layers, ramming, watering and disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth as per MoRTH specification Clause 301 to 305 In ordinary soil Depth upto 3 metre

Providing and laying Structural Cement concrete (Design mix) for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1000, 1500, 1700 & 2100 including form work at any level. P.C.C. grade M15

Item: Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)

DAMP- PROOF COURSE AND PRECAST COPING Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of waterproof compound complete as per specification 50mm thick.

FORMK WORK Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

STEEL REINFORCEMENT: Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)

CAST-IN-SITU CONCRETE: Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

P & F 1st quality Vitrified tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick .

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) : Flush / Ruled/ Struck or weathered pointing.

Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint M. S. Sheet 22 S.W.G. (0.63 mm thick)

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of pin headed glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots brass handles/ peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable)

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer

Providing and fixing Square bars or other flat welded to window, ventilatiors etc.

P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :- (Internal work) Medium Duty Pipes Exposed on wall 15 mm dia nominal bore

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400 grm,15mm nominal bore.

P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 400 gm. 15mm nominal bore.

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore.

P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) Size 510 mm

P & F WVC Foot- rest (IS : 2556 Mark) including cutting and making good the floor. Size 250x125x25 mm

P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231

P&F rigid PVC Pipe (IS:4985 mark) class II (4 Kg /Cm2) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia

P&F rigid PVC Pipe (IS:4985 mark) class II (4 Kg /Cm2) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Reducer 110 X 75 mm 110mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Tee 110mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.50 110mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Socket plug 110mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: W.C. connector bent type 110mm dia

Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 90 Cm & 10 to 12 Mtr deep.

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace (at all floors), making connection etc. complete of approved design. 1000 Litre capacity

CEMENT CONCRETE (CAST-IN-SITU): Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Short point (up to 3 mtr.) 010201.2 Group 1

Medium point (up to 6 mtr.) 010303.2 Group 1

Long point (up to 10 mtr..) 010203.2 Group 1

6 x 2.5 sq.mm 040111.3 Group 2

3 x 4 sq. mm. 040114.2 Group 1

40 A to 63 A rating 060113.4 Group 3

40 A 63 A rating 060132.2 Group 1

S and Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 150711 50mm x 6mm copper strip<br>150711.2 Complete Rate

Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size: 170102 more than 457 mm and up to 610 mm<br>170102.1 Labour Rate

Fixing of fresh air fan/exhaust fan up to size of 300 mm on ply/ poly board of 6.0 mm in existing window frame including cutting of hole in ply. Nut bolts etc. as required. 170200.1 Labour Rate

P and F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet and Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd. 171801 Up to 380 mm size, above 380 mm size, Group - 1

Silt Clearance/ Removal of blown sand/ Berm Unloading undressed with combined lead upto 50 m. for lined canal section. For FSD more than 1 m. upto 2 m.

Earthwork excavation for Lip Cutting in ordinary soil for disty. and minors having vertical height above 0.75 m., kassi work including rehandling with dressing of earthwork. (with extra two initial leads)

Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :12mm thick

S &amp; F in position precast R.C.C. stone (M-15 mix) of standard IRC design including finishing in cement sand mortar 1:3, painting with enamel paint, printing letters and numerals etc. complete (MoRTH specifications clause : 800)Boundary pillars

Supply of traffice cone made out of 1.25 mm thick M.S. sheet, height 1.0 m having upper dia., 8 cm, and lower dia. 30 cm with base plate of size 40 x 40 cm two hooks are to be provided for linking M.S. sheet chain 12 mm dia., whole body is processed in orange stoving enamel paint and one reflective band of 200 mm on it, complete in all respect with one chain 3 m long with each cone.

Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Dismantling of lining and disposing of the material with in 1/2 km lead single tile lining

Providing, laying &amp; fixing in position RCC spun or hume pipes ISI marked with proper jointing in required slope packed in the gasket of hume or spun yarn and neatly finished with rich grout of cement moratar 1:3 or having flexible rubber ring joint made with prefectly air and water tight including testing of joints as per MoRTH Specfication : Clause : 1000 &amp; 2900 NP - 3 600 mm dia

Cement plaster with cement sand mortar (1:3) including racking of joints, smooth finishhing and curing etc., 25 mm thick in 3 coats.

Earthwork excavation for Lip Cutting in ordinary soil for disty. and minors having vertical height upto 0.75 m., kassi work including rehandling with dressing of earthwork.

Providing and Laying M15 Grade Double PCC Block (30x15x5 Cms.) Lining consisting of ; (i) 5 cm. thick blocks laid in 1:5 Cement Mortar Over 10mm thick cement mortar 1:5 on subgrade (ii) 16mm sandwitch plaster in CM 1:3 over first layer of blocks (iii) second layer of 5 cm. thick block laid in CM 1:3 with 6mm thick CM 1:3 over sandwitch plaster including curing upto completion of lining section as per design and specifications. On Side Slope including dressing of sides, scafolding and template allowance, Pummping charges of water to lining heading from source and curing upto 28 days.

Providing and Laying Cement pointing (flush or ruled) for Canal Dowel in cement mortar 1:3 on new brick work with Bikaner bajri complete in all respect.

Refixing in position of APM block made of CI as per standard specification with adjustable arrangement and required dismentaling adjoing brick massonary, cleaning, and rearrnging dimesion of ABM block fixtures including transportation to site, second stage concreting in (CC 1:2:4) centering, shuttering, painting with red oxide finishing etc. complete in all respect excluding cost of APM Block (all size).

Supply and fixing in position of APM blocks made of CI as per standard specification with adjustable arrangement and required fixtures including transportation to site second stage concreting in (CC 1:2:4 ) centering ,shuttering, painting with red oxide finishing etc complete in all respect cost of APM Block (all size) per block.

Supply and fixing of sluice/ regulator gates using MS plates , channels , tees, angles, girders of given size and design having suitable brass / gun metal lining , rubber seals etc and desired rod length , capston head , clamps keys, wire ropes , ladders , supports , etc complete ( excluding civil works) including painting with red oxide paint and delivery at site ( size upto 1 sqm).

Add extra if worm gears are to be provided in the capston.

Add Extra if the opening size is greater than 1 Sqm but upto 3 sqm (Drawing and design shall also be supplied by supplier, for gates having size more than 1.00 sqm).

Brick masonry work in cement mortar 1:3, with mechanical mixer in foundation (at any level) complete, including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300

Providing and fabricating steel reinforcement at any level including cutting, binding, placing in position and binding complete in foundation as per drawing and technical specification as per MoRTH Specification : Section: 1600 TMT/ HYSD Steel reinforcement

Providing and laying Plain cement concrete mix with stone aggregate 20mm nominal size mechnically mixed and vibrated in foundation upto a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level as per MoRTH specification : clause 1000, 1500 &amp; 1700. R.C.C. grade M-20 in superstructure upto 4.5 mtr. from ground level excluding cost of steel reinforcement but including the cost of centering &amp; shuttering

Providing and laying Expansion Joint complete as per drawing and technical specification With corrugated copper plate, compressible fibre board, pre-moulded joint filter and joint sealing compound as per MoRTH Specfication section 2600 Providing and fixing 20mm thick compressible fibre board in expansion joint complete.

Providing and laying first class brick masonry work (minimum 10.5 MPa) up to a depth of 1.50 meters below ground and above 1.50m from Bed/ground level complete including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300 Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/ Bed level as per MoRTH Specification : Clause 1000, 1500 &amp; 1700 P.C.C. 1:3:6 mix with crushed stone aggregate 20 mm nominal size.

Dressing of bed for preparation of sub-grade for lining including removal of irregularities upto 7.5 cm depth.

Dressing of side slopes for preparation of sub-grade for lining including removal of irregularities upto 7.5 cm depth.

Providing and Laying M15 Grade Single PCC Block (30x15x5 Cms.) Lining consisting of :- (i) 12mm thick plaster in CM (1:6) on subgrade. (ii) 16mm thick sandwich plaster in CM (1:3) over the plaster at item no. (i) above. (iii) 50mm thick Blocks in CM (1:3) with 6mm thick CM layer including curing upto completion of lining section as per design and specifications. In Bed including dressing of bed, Pummping charges of water to lining heading from source and curing upto 28 days.

Providing and Laying Brick masonry for Canal Dowel with brick of class designation 100, in Cement Mortar 1:4

Earth work excavation in ordinary soil for distributaries and minors having discharge less than 10 cumecs; Kassi work undressed.

Filling of open joints of STL and DTL in C.M 1:3.

Dismantling upto 1.5m in foundation and/or 1.5m above ground level including T&amp;P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [MoRTH Specification clause 202] Concrete Prestressed/ reinforced Cement Concrete grade M-20 &amp; above (By Mechanical means)

Earth work in embankement construction, side slopes etc. from already excavated earth in stockpiles including breaking of clods and dressing with all lead and lift but excluding watering and rolling by manual means

Providing and Laying in position cement concrete for Canal Dowel, including curing, compaction and cost of centering and shuttering in grade M15, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.

Structural Cement concrete (cast in situ/ precast/ PSC) upto a height of 5m for reinforcedconcrete (Design mix) in uperstructure complete including steel formwork, scaffolding etc. as per drawing and technical specification as per MoRTH Specification 1500 &amp; 1700 M 35 grade solid slab superstructure

Pointing with cement mortar (1:3 ) on brick work in substructure as per MoRTH Specification: Clause 1312.3

Supplying and fixing tar paper bearing over the pier/ abutment cap as per MoRTH specifiacation including overlap and wastage if any as per the direction of the Engineer in charge

Providing laying spreading and compacting specified graded sand, gravel (crushed graded stone material ) as per Table 400-1, 400-2 or any other coarse material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MoRTH specification : Clause 401]. By mechanical means with all lead For Grading II Materia

Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-9 &amp; 400-10 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404 &amp; 112] (by manual means) with all leads (compacted thickness as specified to be measured) Using Stone Screening Grading no.1 (63-45mm) crusher broken with stone screening Type B

Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-9 &amp; 400-10 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404 &amp; 112] (by manual means) with all leads (compacted thickness as specified to be measured) Using Stone Screening Grading no. 2 (53-22.4 mm) crusher broken with stone screening Type B

Providing and laying first class brick masonry work (minimum 10.5 MPa) up to a depth of 1.50 meters below ground and above 1.50m from Bed/ground level complete including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300 Cement mortar 1:3 (1 cement : 3 coarse sand)

SARAN BUILDWELL PVT. LTD. (BID ID -3056245)