Repair and renovation grass mandi dhramshala and 32 no Pulli School, ward no 46 Est Cost Rs. 10.71 lacs dt 22/23.06.2026

Dismantling concrete Cement concrete plain1:2:4 mix

Dismnatling brick work tile, masonry or tile lining in cement

LOADING AND UNLOADING By Mechanical Means stone(buildingorpitching)Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brickbats, Brick ballast and Stone metal

Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stoneboulders, Kankar andbuilding rubbish, Earth. 5.0 km

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixingbymechanicalmeansusingconcrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

PLASTERING & POINTING 12.5 mm thick cement plaster 1:4

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). Size 800x800 mm