Special repair work of Type 4 house number B 22 located in SSP Compound Meerut

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). (DSR15.56 )

Scraping old painted surface inculding disposal of all scraped material to distance of 30 Meters (200 ft) as dirceted by Engineer in charge (DSR.N.13.88)

Supply & fixing of Indian Commercial flush shutters 35 mm. thick including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings also including their supply and including painting with two coats of black Japan on all iron fitting if necessary.(DSR.N.9.21.1)

Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) (DSR.N.9.7.1)

Brick work with common burnt clay(non modular)bricks of class designation 7.5 in cuperstructure above plinth level all shapes and size including all materials labour T & P as DSR.N.6.4.1

12 cm thick plaster with cement and corse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (DSR.N.13.4)

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats (DSR.N.13.8)

Supply and fixing Galvanized Mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of of C.P. teak wood batten 8 cmx1cm.(3''x3/8'')/Flat iron 25 mmx4mm and including supply of all materials labour Tool & plants etc. required for proper completion of the work.(DSR.N.9.51.1)

providing and fixing ISI marked flush door shutters conferming to IS:2202 part -I, decorative type coreof block board construction with frame of 1st class hard wood well matched teak 3 ply veneering with 25 mm thick (for cuoboard) all same as DSR.N.9.20.3

Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of (SI No 9.88)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR.No 9.100.1)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or byed to required colour or shade with necessary screws etc complete (DSR.N 9.97.1)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (DSR.N.11.41.2)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work(DSR.N.13.99.1)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats)(DSR.N.13.81.1)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface(DSR.N.13.111.1)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.DSR,11.37

Providing and fixing water closet squattaing white Vitreous china Orissa pattern W.C. pan of size 580x440mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required (DSRN.17.1.1)

Supply and fixing of CP brass bib cock/stop cock including supply of all material labour T&P etc complete (DSR.N.18.49.1)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR17.7.1)

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required Range of three squatting plates with 10 litre P.V.C (DSR 17.6.3) automatic flushing cistern

Providing & Fixing Satinless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets, and stainless steel plug 40mm including painting the fittings and bracket cutting and making good the walls wherever required. Kitchen sink with drain borad 510x1040mm bowl depth 250mm (DSR No. 17.10.1.1)

providing and placing on terrace (at all floor levels)polyethylene water storage tank.IS:12701 marked with cover and suitable locking arrangement and making necessary hole for inlet,outlet and overflow pipe but without fittings and the base supports for the tank as DSR.N.18.48

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed bythe Engineer-in-Charge a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent (DSR No 8.2.1.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.2)

Supply and fixing of 110 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.2)

Supply and fixing of 75 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.1)

Providing and fixing 15mm dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (DSR-17.22b)

Reinforced cement concrete work in beams,suspended floors,roofs,having slopes up to 15degree landings in 1:1.5:3 cement ,coarse sand and 20m size stone aggregate all same as DSR,No.5.3,same but excluding shuttering,centering and renforcement etc.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.DSR.N.5.22A

Providing corrugated G.S.sheet roofing including vertical/curved surface fixed with polimer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washersor fiiied with white lead,inchuding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required(1mm thick with zinc coating not less than 275gm/m^2,DSR.N.12.1.1

Please Enable Macros to View BoQ information