SPECIAL REPAIRS TO UPGRADATION OF SEWAGE LINE AND PROVISION OF CHAIN LINK FENCING AND CHEQUERRED TILE PATH UNDER GE GOLCONDA

Amount

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep and getting out in any type of soil.Complete all as specified and as directed.

Excavation in trenches n.exc 1.50m wide and depth exc. 1.50 m but n. exc 3 m and getting out in any type of soil.Complete all as specified and as directed.

Excavation in post holes (or simlar holes) each n.exc 0.5 cum, in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) for foundation.Complete all as specified and as directed.

M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc Complete all as specified and as directed.

Returning filling including spreading levelling watering and well ramming in layers not exc 25 cm each in soil.Complete all as specified and as directed.

Removal of surplus soil to a distance exc 50M but n exc 100M complete all as specified and directed by Engineer-in-Charge.

S&F MS work as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets,nuts & bolts (for securing wiremesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc Complete all as specified and as directed.

Supply only MS galvanised chain link fencing, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

S&F MS Screw bolts hot dip galvanized machine made with hexagonal or square heads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut 5 to 10mm dia meter of neck exc 5cm but n exc 10cm long all as specified and directed.

M&L for preparing of new steel surface of any description not otherwise described over 10cms width or girth and applying 2 coats of synthetic enamel paint over one coat ofred oxide primer complete all as specified and as directed.

S&F 8mm dia and over MS plain bars, cut to length bent to shape required, including cranking, bending and binding with MS wire(annealed) not less than 0.9 mm dia all as specified and directed

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete,Fe 410-W(Gde E-250) Quality A.Complete all as specified and as directed.

M & L for brick work with fly ash brick subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and directed

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M & L for three coat of white wash on new surface of wall including preparation complete all as specified.

Demolition of brick work or stone masonary, built in cement mortar.

M & L for brick work with fly ash brick subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and directed

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in coping Complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in benching in manholes and finishing of exposed surfaces of concrete.Complete all as specified and as directed.

Exta for forming fair finished drain or channel of 30 cm inner girth in cement concrete using extra cement including all forms, moulds etc.Complete all as specified and as directed.

Demolition of cement concrete of any description in any position (Reinforced).Complete all as specified and as directed.Complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded aggregate) for manhole covers incl necessary form work, set in CM 1:4 complete all as specified and directed by Engineer-in-Charge. Complete all as specified and as directed. (Note :- Reinforcement shall be measured and paid seperately)

M&L for TMT bars, 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm. Complete all as specified and as directed.

M&L for TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm. Complete all as specified and as directed.

M & L Reinforced cement concrete pipes, 150mm bore, class NP2, conforming to IS 458, laid and jointed complete with collars laid in trenches including taking down existing pipe, complete all as specified and directed.

M & L Reinforced cement concrete pipes, 200mm bore, class NP2, conforming to IS 458, laid and jointed with collars laid in trenches including taking down existing pipe etc., complete all as specified and directed.

M&L for concrete bed to drain pipes incl packing under hauching against the side of the pipes after they are laid and tested in PCC 1:3:6 type C2 for 150mm bore of pipe aComplete all as specified and as directed.

M&L for concrete bed to drain pipes incl packing under hauching against the side of the pipes after they are laid and tested in PCC 1:3:6 type C2 for 200mm bore of pipe all as specified and directed.

Rendering 10mm thick in CM 1:4 mixed with water proofing compound, on brick surface, finished even and smooth without using extra cement all as directed by Eng-in-Charge (Note :- Water proofing compound shall be measured & paid seperately as "Supply only")

Supply only integral water proofing compound

Preparing new steel surfaces of small articles such as rungs and handles and applying two coats of black japan paint complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW/AC/PVC/RCC) set in cement mortar, Internal dia of pipe upto 110 mm, etc complete all as spfd and directed.

S & F 110 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as spfd & directed.

S & F 75 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as spfd & directed.

M & L 110 mm bore PVC( SWR ) bend with oval access doors, incl taking down.Complete all as specified and as directed.

All as per item No. 37 above 75mm dia.

M & L 110 mm bore PVC( SWR ) junction single ,(singleT) equal or unequal+, incl taking down.Complete all as specified and as directed.

All as per item No. 39 above 75mm dia.

Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

S&F in repairs salt glazed stone wave gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete Complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as spfd and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base in floors all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cememnt and pigment including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

NAVANAND ENTERPRISES (BID ID -3308003)

SAI RAM CONSTRUCTIONS (BID ID -3310400)

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd (BID ID -3318304)

VACON INFRASTRUCTURES (BID ID -3311935)

BUILDWEL (BID ID -3311917)

Sri Lakshmi Enterprises (BID ID -3312016)

Rallapati siva sai prasad (BID ID -3318648)

S.R.M.K Enterprises (BID ID -3318428)

Squad 7 Projects and Services Pvt Ltd (BID ID -3309979)

rahi consultant (BID ID -3319014)