UPGRADATION OF STADIUM AT CHAGLAGAM, DIST ANJAW (ARUNACHAL PRADESH)

Amount

Supply only Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified (Make : JSW, TATA, Jindal)

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws as specified (Make JSW, TATA, Jindal)

Providing 100 mm thick type B0 1:2:4 (12.5mm graded aggregate) cement in lintels upto 1.5m clear span, cills, steps seismic and other similer bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 040208, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, Hard/ dense soil complete all as specified and as directed

Cement concrete type D2 1:4:8 in foundations, filling and mass concrete as complete all as specified

Supply only Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillers (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work Conforming to Fe-290 Gde E-165 -- (For Chain link fencing Post Angle 65x65x65, 30x5 flat and nut bolt for securing of fencing

Chain link MS galvanised fencing, any size or type

M&L for two caots of synthetic enamel paint on new steel surfaces over one coat of red oxide primer over one coat of red oxide primer over 10cm width of grith including preparation of surfaces

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging, also fastening and fixing complete (For Gates)

Framed work as grill, gratings, etc,, with ends of bars shouoldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work conforming to Fe.290 Gde-E-165 (for Sign Board)

Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high (for Sign Board)

Plain cement concrete Type B2 1:2:4 using 40 mm graded aggregate as in surface channels and drains complete all as specified and as directed (For drainage)

Cutting out bricks, forming toothing for and bonding new into old work incuding value of new materials entering old walls and jointing and pointing in Cement morter in 1:3 (measured on vertical face in contact with old wall only)

100 mm thick Cement concrete Type D2 1:4:8 in foundations, filling and mass concrete as complete all as specified (for interlocking subbase)

25mm thick sand filling under floors or in foundations including watering and consolidation (below interlocking tiles)

Machine pressed precast concrete interlocking paver block coloured with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed

Providing, type B0 1:2:4 (12.5mm graded aggregate cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in heighyt, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Surface excavation n exc 30 cm and averaging 15 cm and getting out in any type of soil

Excaution in trenches n exc 1.5m wide and n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, wells, cessipts, manholes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out soft/ loose soil

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundaiton, filling and mass concrete

M&L for brick work with sub class old size 'B' brick stright or curved on plan exc 6m mean radius built in CM 1:6

M&L hard core of gauge exc 63mm but not exc 100 mm depoted, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface broken stone or boulders

Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point

M&L for randering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and smooth with out using extra cement

M&L for randering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:4 and renderting is to be finish

M&L for two coats of cement base paint on newly plaster surfaced of walls including preparation of newly surface

M&L for two coats of oil bond distemper apint on newly plaster surfaced of walls including preparation of newly surface

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and hevay bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc

M&L for coats of synthetic enamel paint on new steel surgaces over one coat of red oxide primer over one coat of red oxide primer over 10cm width of grith including preparation of surfaces

M&L Vertified ceramice double coloure tiles 10mm thick square/ rectangular) polished area of each tiles exceeding 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed

S&F powder coating of any colour aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing chips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F powder coating of any colour aluminium sliding window and ventilater side hung type without sash bars aluminium saction weighting 0.55 kg/m including necessary joining cleats glazing clips rubber packing rubber packing including all fitting complete all as specified and directed

S&F powder coating of any colour aluminium frame for doors, windows, ventilators with one or more rebate including joining cleat fixing etc. complete all as specified

S&F 3mm thick sheet glass, oridinary quality glazing with oil putty in n exc 0.5Sqm each pane

Supply and fixing 05 KVA CPCB IV+ complaint Genset, efficient CRDI system 02E Series low emission, high efficiency engine. Tech specifications as per Appx 'A'. The Disel Generator Set shall be supplied with a warranty of 2 year. Make :- Cummins/ Ashok Laylend/ Greaves/ Kirloskar/ Caterpillar/ Mahindra/ Eicher/ Escort Engine i.e. Escorts. Note : (i) Initial Testing done by the supplier tat consignee FOR adn cost of the effect is deemed to be included in quoted rate of the Genr Set. Warranty :- The Supplier will give free warranty for engine, alternator, self batteries, control panel and remaining accesories for a period of minimum 24 Months from the date of supply, for generator which do not require commissioning or for a period of minimum one year from the date of commissioning and successful testing for generator which require commissioning, whichever is later

Excavation in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and ramming eart or broken rubble mixed with earth around, in layers not exceeding 25 cm, Hard/ dense soil complete all as specified and as directed

Cement concrete type D2 1:4:8 in foundations, filling and mass concrete as complete all as specified

S&F rolled mild steel roof trusses (Framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm, thick of an colour havihng tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer over one coat of red oxide primer over 10cm width of grith including preparation of surfaces

Supply and fixing LED Solar Street light fitting 12 Watt Including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured separately)

Excaving in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixture with earth around, in layers not exceeding 25 cm, Hard/ dense soil complete all as specified, and as directed

Cement concrete type D2 1:4:8 in foundations, filling and mass concrete as complete all as specified

MANAKSO CONSTRUCTION AGENCY (BID ID -3223331)

SS ENTERPRISES (BID ID -3223378)

AMBIKA ENTERPRISE (BID ID -3221706)

V.S ENTERPRISES (BID ID -3223285)