Construction of Samajik Sabhagruh at Mohili V.P.Maniwali Tal.Karjat Dist.Raigad

Item No.1 - Excavation for foundation in earth soil of all types ,sand gravel and soft murrum including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means

Item No.2Providing soling using 80mm size trap metal in 15cm layers including filling voids with crushed sand grit ramming watering etc. complete.

tem No.3-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No.4-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Item No.5-Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Item No. 6:- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Item No.7 Providing & Laying in Situ / Ready Mix cement concrete in M-20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Columns as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand

Item No.8 Providing & Laying in Situ / Ready Mix cement concrete in M-20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Beam & Lintels as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand

Item No.9-Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No.10- Providing and fixing in position Fe-500 steel bar reinforcement of various diameters for R.C.C.pile caps footings, foundations, slabs,beams,columns,canopies, staircases,newels,chajjas, lintels, pardies, coping, fins, arches, etc. as per detained designs, drawings, and schedules, including, cutting, bending, hooking the bars binding with wires or tack welding and supporting as required complete

Item No. 11:-Providing and laying vetrified matt finish Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Item No.12:-Providing sills of polished kadappa stone 25mm to 30mm thick on a bed of 1:4 cement mortor including filling joints with filler joint with slurry curing, etc. complete.

Item No.13:-Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box

Item No.14:-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Item No.15 Providing and fixing Country cut teak wood single leaf panelled door shutters 35 mm thick style and rail and 19 mm thick T.W. panels as per detailed drawing including wrought iron hold fast stainless steel fixtures and fastening and three coats of oil painting etc. complete.

Item No.16 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.

Item No.17 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Item No.18-Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No.19 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Quality control charges for test a) BASIC TEST OF CEMENT:Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness.

C.C.Cubes m-20 :Compressive strength

Rubble -Comp.Strength

FINE AGGREGATE: Fineness Modulus (Sieve Analysis.) Silt & Clay Content

Add Royalty Charges For Rubble

Add 18% GST

Add 0.5% Labour Insurance Chargs

Add 1% Sqm Visit Charges

Please Enable Macros to View BoQ information