Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
15 Apr 2025, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
10.2.The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where. V=Advertised value of the tender in crores of Rupees. N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turn over. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported byAudited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. b(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows. The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as
Defination of Similar Work :- Supply of Skilled / Semi-skilled Manpower to Government Organizations or Public Sector Units/Execution of any S&T WORK involving Labours.
7 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer has to go through Inspection Clause as stipulated in Annexure - XVII of the Tender Document and comply
Tenderer has to go through the Special Conditions of the contact stipulated in Annexure XVIII of the Tender Document and comply.
As per GCC Clause 14.0 Documents to be Submitted Along withTender. (i)The tenderer shall clearly specify whether the tenderis submitted on his own (Proprietary Firm) or on behalf of aPartnership Firm / Company / Joint Venture (JV) / RegisteredSociety / Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc. The tenderer(s) shallenclose the attested copies of the constitution of their concern,and copy of PAN Card along with their tender. TenderDocuments in such cases are to be signed by such persons asmay be legally competent to sign them on behalf of the firm,company, association, trust or society, as the case may be.
ii) Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (i) All documents in terms of Para 10of the Tender Form (Second Sheet) above. HUF: (ii)A copy ofnotarized affidavit on Stamp Paper declaring that he who issubmitting the tender on behalf of HUF is in the position of'Karta' of Hindu Undivided Family (HUF) and he has theauthority, power and consent given by other members to act onbehalf of HUF. (iii)All other documents in terms of Para 10 of theTender Form (Second Sheet) above. (c) Partnership Firm: (i) Alldocuments as mentioned in para18 of the Tender Form (SecondSheet). (d) Joint Venture (JV): All documents as mentioned inpara 17 of the Tender Form (Second Sheet). (e)Companyregistered under Companies Act 2013: (i)The copies of MOA(Memorandum of Association) / AOA (Articles of Association) ofthe company (ii)A copy of Certificate of Incorporation (iii)A copyof Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of theindividual to sign the tender on behalf of the company andcreate liability against the company. (iv)All other documents interms Para 10 of the Tender Form (Second Sheet) above. (f) LLP(Limited Liability Partnership): If the tender is submitted onbehalf of a LLP registered under LLP Act-2008, the tenderer shallsubmit along with the tender: (v)A copy of LLP Agreement (vi)Acopy of Certificate of Incorporation (vii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (viii)An undertaking by all partners ofthe LLP that they are not blacklisted or debarred by Railways orany other Ministry / Department of the Govt. of India fromparticipation in tenders / contracts as on the date of submissionof bids, either in their individual capacity or in any firm/LLP or JVin which they were / are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (ix)All other documents in terms of Para10 of the Tender Form (Second Sheet). (g)Registered Society &Registered Trust: The tenderer shall submit: (x)A copy of the Certificate of Registration (xi)A copy of Memorandum of Association of Society/Trust Deed (xii)A copy of Power ofAttorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (xiii)A copy of Rules & Regulations of the Society. (xiv) All other documents interms of Para 10 of the Tender Form (Second Sheet) above (iii)Ifit is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having.
As per GCC Clause No.18.10 The tenderer shall clearly specifythat the tender is submitted on behalf of a partnership firm. Thefollowing documents shall be submitted by the partnership firm,with the tender: (i)Anotarized copy of partnership deedora copyof the Partnership deed registered with the Registrar.. (i)Anotarized or registered copy of Power of Attorney (dulyregistered as per prevailing law) in favour of the individual totender for the work, sign the agreement etc. and create liabilityagainst the firm. (ii)Anundertaking by all partners of thepartnership firm that they are not blacklisted or debarred byRailways or any other Ministry/Department of the Govt.of Indiafrom participation in tenders / contracts as on the date ofsubmission of bids, either in their individual capacity or in anyfirm/LLP in which they were / are partners/members.AnyConcealment / wrong information in regard to above shall makethe bid ineligible or the contract shall be determined underClause 62 of the Standard General Conditions of Contract
CERTIFICATE (As per GCC 2022): The tenderers shall submit acopy of certificate stating that all their statements/ documentssubmitted along with bid are true and factual. Standard formatof certificate to be submitted by the bidder is enclosed asAnnexure V (Annexure-V of GCC April 2022). Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid (Clause 6.1 of GCC 2022 PART-I) ( Click here to download Format)
Hyderabad Division: Signalling arrangemens in connection with the works of (1) SC-DHNE Section (UP & DN/SL) - TTR (FS+TWS+CMSC) - 47 Sets, TTR (CS+CMSC) - 6 Sets, (2) SC-DHNE Section - CTR(S) - 15.838 Tkm & TRR(S) - 2.542 Tkm, (3) MUE- SC Section (UP & SL) - TRR (P) - 14.200 Tkm (130 kmph) & (4) MUE-SC Section - CTR(S) - 10.771 Tkm & TRR(S) - 6.842 Tkm.
Y-SG-36-2024-25-20
Y-SG-36-2024-25-20
Open
Works - General
15 Months
Hyderabad, Telangana
₹0
₹2.9 L
15 Apr 2025
19 Mar 2025
31 items across 2 schedules · ₹2,85,16,853 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Track Lead Junction Boxes Fibre Glass as per Drg No. CWM-00597 of FRP material to and Specn IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx 5mm, 0.9m long, two numbers of GI pipes of 25mm Dia, 500mm long along with nuts and bolts and 500mm long (grommet bushes, 60mm ARA terminals-2 Nos). | Numbers | 1050.00 | 1,546 | 16,23,300 |
| 2 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC/DC fully insulated and no-load RPM shall be 1900/1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 Nos. of 7.2mm Dia Bosch MSS drill bit, Drill check Dia 13 mm and drilling Dia in steel 8mm/ 13mm along with packing accessories. | Numbers | 1.00 | 22,602 | 22,602 |
| 3 | Supply of Tool Kit as under - 1) Standard Tool Bag (CANAVAS) - 1 No. 2) Soldering Iron (Make Soldern/ Philips) -60W/230V - 1 No. 3) Digital Multimeter - True RMS Meter (Philips/Fluke/Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4) Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5) Cutting plier 6" (Taparia Make) - 1 No. 6) Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7) Nose plier 6" (Taparia Make) - 1 No. 8) Wire stripper (Taparia Make) - 1 No. 9) Fiber tape 3m length - 1 No. 10) Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11) Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12) Pop spanner wrench 10mm to 30mm (Auto adjustable spanner) of Taparia make - 1 No. 13) Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. 14) Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No.15) Hammer 3.0 lb - 1 No.16) Chisel 6" (for cutting bond wire) - 1 No.17) Poker 8" (for removing bond wire, bond pin) - 1 No.18) Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No.19) Test piece (Point wedge piece) - 1 No.20) Multi colour rechargeable LED torch light - 1 No. 21) Universal key - 1 No.22) Box spanner for 6 way terminals (13mm) - 1 No.23) Nylon brush (for cleaning purpose) - 1 No.24) Sealing plier - 1 No.25) Crimping Tool (1.5 to 16 Sq.mm) - 1 No.26) Feeler gauge - 1 Set27) TSR Meter (for testing condition of track circuit) - 1No.28) Wooden Block (60mm x 60mm) - 1 No.29) Track shorting clips - 1 No.30) Tester - 1 No.31) Flat file 12" length x 1" width - 1 No.32) Clip on meter - 1 No.33) Digital Earth meter - 1 No@46"41@ Meggar - 1 No. | Numbers | 1.00 | 46,332 | 46,332 |
| 4 | Supply of Galvanised Wire rope 6/19 steel, 6 mm Dia with fibre core as per Specn IS 3459/2004 or latest. | Metre | 5200.00 | 80 | 4,16,000 |
| 5 | Supply of Double Walled Corrugated (DWC) HDPE duct of various Diameter of length of 6m as per Specn RDSO/SPN/204/ 2011 Ver.1.1 Amd.1 or latest. The duct shall be supplied along with push-fit type O-ring coupler or end cap. DWC of outer Diameter 180mm and inner Diameter 153mm. | Numbers | 5.00 | 3,827 | 19,135 |
| 6 | Supply of Double Walled Corrugated (DWC) HDPE duct of various Diameter of length of 6m as per Specn RDSO/SPN/204/ 2011 Ver.1.1 Amd.1 or latest. The duct shall be supplied along with push-fit type O-ring coupler or end cap. DWC of outer Diameter 63mm and inner Diameter 50mm. | Numbers | 20.00 | 875 | 17,500 |
| 7 | Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO Drg No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and Specn IRS: S 75-2006 Rev.2.0 (Tentative) or latest, IRS: S 23-88 Amd.1 or latest. | Numbers | 200.00 | 97 | 19,400 |
| 8 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO Drg No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and Specn IRS: S 75-2006 Rev.2.0 (Tentative) or latest, IRS: S 23-88 Amd.1 or latest. | Numbers | 500.00 | 406 | 2,03,000 |
| 9 | Supply of Thermoshrink Jointing Kit for jointing underground 0.9mm dia conductor 6 Quad Cable as per Specn IRS: TC 77-2012 Rev.3 (Amd.1 to Amd.3) or latest. | Numbers | 200.00 | 3,715 | 7,43,000 |
| 10 | Supply of Titanium coated 7.2 mm drill bits of Bosch/Addision make. | Numbers | 500.00 | 146 | 73,000 |
| 11 | Supply of Channel bond pins 7mm dia single groove as per Specn IRS: S 17-75 Amd.1 or latest. | Numbers | 10000.00 | 3 | 30,000 |
| Schedule total | ₹32,13,269 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .