SPECIAL REPAIR TO BLDG NO P-61 OF ARO AND PROVN OF COVERED PARKING SHED NEAR SHOPPING COMPLEX BLDG NO P-298 AND DUTY ROOM WITH ATT BATHROOM FOR DUTY OFFRs AT HQ AADC COMPLEX AT GMS UNDER GE I GOS

Amount

Dismantling of Wall & Ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets. Complete all as specified & directed.

S&F 12 mm thick plain/designer Gypsum Board False Ceiling with GI Frame work including all necessary drilling, cutting to fix electric items. Complete all as specified & directed with following :- (a) GI Grid Channel 30×25×20 mm of guage fixed with rawl plug & screw 450 mm centre to centre along with perimeter walls. (b) GI Channel made to shape 50×40×40 mm of 24 guage placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI Intermediate runners of size 45×10×10 mm of 24 guage fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide & 20 mm guage suspended fixed with steel fastners to roof ceiling & 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP & finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Dismantling of floor, hearth or walls tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off permises all as specified.

M&L for Double chargred Light shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match complete.

M&L for Double chargred Light shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface such as skirtings, dados etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match complete.

M&L for glazed ceramics coloured tiles of size 350x250x7mm/ 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over & including 10 mm thick 1:4 cement plaster on fair faces of brick work or concrete surfaces.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes complete.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as specified and directed

M&L for 550 mm x 550 mm size Pre-polished Machine cut Kota Stone slab flooring 20-25 mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete over & including 20 mm thick screed bed or bedding layer of mortar for laying floor finishes.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement). Complete all as specified & as directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each all as specified.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.0 Sqm each all as specified.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

S&F Powder Coated Aluminium frame (Minimum thickness of Powder Coating 50 micron) for doors, windows, ventilators & partition with one or more rebates including necessary joining cleats for fixing etc, for aluminium partition includes necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading screws etc. Complete all as specified & directed.

S&F 12 mm thick Toughened with acid texture Glass any type of fabricated glass made translucent either for privacy or decorative purposes for aluminium partition. Complete all as specified & directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified & directed.

S&F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified & directed.

S&F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.

S & F in repair Europian WC wall mounted cascade pattern (Coupled WC) with UF soft close seat cover, hinges, fixing accessories set size 370x645x810mm including cistern vitreous china incl all fitting flush pipe etc of specified make complete all as specified and directed.Make Jaguar CAT No OPS-WHT-15751UFS

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F in repair WHB under counter of size 590X420X195 mm make jaguar cat CNS WHT 705 incl waste coupling 32/40 mm full length make jaguar cat ALD 705 L 130 complete all as specified and directed.

M&L in repairs vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

S & F in repair CP hand showar (health faucet) with 1.0 mtr long easy flex tube for 15 mm bore all as specified and directed. Make Jaguar cat ALD 565

S&F in repairs CP anodised toilet Paper Holder recessed type Make Jaguar cat CAN CHR 1551 etc.

S & F in repair Urinal Pot of size 355X345X535 mm Make Jaguar cat N URS WHT 13261 complete.

M&L in repairs Vitreous China Urinal partition white of size 310 X 700mm as specified and directed.

S&F in repair bib tap Chromoium plated , cast copper alloy 15 mm bore complete all as specified and directed. Make Jaguar cat CQT 23037

S&F in repair Pillar cock long neck with aerator Chromoium plated cast copper alloy for 15 mm bore complete all as specified and directed. Make Jaguar cat CON-021KN

S&F in repairs PVC waste pipe of bore 32mm for urinal/WHB etc all as specified and directed.

S & F in repair looking mirror designer type size 900 X1000mm as per sample fixed with brass screw to wall all as specified and directed

S & F in repair looking mirror designer type size 900 X1400mm as per sample fixed with brass screw to wall all as specified and directed

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete aal as specified and directed..

S&F in repair 600 mm long CP anodised tubular towel rail, between flanges etc. Make Jaguar cat CAN 1111NM

S&F in repair CP Soap dish in bathroom make Jaguar cat ARN 7731all as specified and directed

S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Taking up or down or dismantling of 50 mm bore PVC Pipe fixed complete to walls, ceiling or in floor complete all as specified & directed.

S&F 50 mmdia PVC Pipe fixed complete to walls, ceiling or in floor complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs Chromium plated grating doom 100 m dia fixed in floor in CM 1:3 complete all as specified and directed

S & F in repair Brass chromium plated Basin mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed.

S&F in repairs Stainless steel Towel Rack with lower Hangers but with 3 hooks. Complete all as specified & directed. Make-Jaquar Cat Part No.AHS-1581H.

S&F in repairs PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc. Complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stone work & precast concrete article complete.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius built in 1:6 cement mortar. Complete all as specified & directed.

Demolition of Reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc & setting in 1:6 cement mortar complete with joints to match including necessary formwork if required. Complete all as specified & as directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Complete all as specified & as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. Complete all as specified & directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded/chamfered angles & throating with & including necessary formwork use. Complete all as specified & directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Taking down cupboard of any description, any material all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by GE.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm. Complete all as specified and directed.

S&F for 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified.

S&F for 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall or concrete surfaces and applying 2 mm thick wall care putty. Complete all as specified & directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete.

Dismantling wrought iron or mild steel work of any discription not otherwise provided for omplete all as specified and directed.

S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20 mm of the length indicated) of Fe410-W (Gde-E-250) quality-A. Complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240. Complete all as specified & directed.

Dismantlings posts or struts (wood, steel,or RCC) any section including taking out embeded portion and making good disturbed ground etc omplete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, in soft/loose soil, getting out, returning filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering or removing surplus soil to a distance not exceeding 50 m & making good surface. Complete all as specified & directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe410-W (Gde-E-250) quality-A. Complete all as specified & directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Complete all as specified & directed.

M&L for PCC 1:2:4, type B-0, using 12.5 mm graded stone aggregate as in sub base flooring, 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of guage n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. Complete all as specified & as directed. .

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified & directed.

M&L for Excavation over areas, n exc. 1.50 m deep & getting out in soft/ loose soil. Complete all as specified & directed.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate as in subbase. Complete all as specified & directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading.Complete all as specified & directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Complete all as specified & directed.

M&L for forming 12 mm thick expansion joints in 200 mm thick concrete slab, filled with pre-formed bituminous filler & top 30 mm primed & sealed with sealing compound, Grade 'A'. Complete all as specified & directed.

M&L for forming construction joint 90 mm deep × 10 mm wide filled with grade 'A' sealing compound. Complete all as specified & directed.

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

(ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

(iii) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

(iv) Applying two coats of bituminous aluminium paint including preparation complete.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 with liquid water proofing compound @ 200ml per 50 Kg cement (Waterproofing compound should be measured & paid seperately) complete.

M&L for completely removing the existing finishes and applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on plastered wall surfaces.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & as directed.

Dismantling of PVC Panels incl frame all as specified and directed.

M&L for PVC Wall panelling 6 to 8 mm thick, width may vary between 250 to 350 mm incl cutting and fixing of PVC wall panel in panel frame with screws or attaching with glue complete all as specified and directed by Engr-In-charge.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc complete all as specified & as directed.

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC casing caping duly fixed on walls continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor cable for earth continuity wire , MS box including modular cover plate washer & screw and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for One light point controlled by one, one way switch

All as per items no 152 above but One ceiling/ exhaust fan point controlled by one switch.

All as per items no 150 above but One 3 pin 5 Amps socket outlet point on independent board

All as per items no 152 above but One 3 pin 5 Amps socket point on the same board

All as per items no 152 above but One light point controlled by two two way switches

All as per item no 152 above but with cable 4 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole one way.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.(Make : ABB/Crabtree)

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F switch socket combination 2-in-1, 5 pin 5 and 15 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. (Make : ABB/Crabtree)

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.(Make : ABB/Crabtree)

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F ceiling fan regulator electronic step type socket mounting type. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including surface in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit (Cable make Anchor/ Havells /Finolex)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including surface in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit (Cable make Anchor/ Havells /Finolex)

S&F sheet metal enclosure Triple pole and neutral Double door vertical type suitable for MCCB 4 pole as incomer(w/o MCCB) for flush/surface mounting with bus 200Amps rated, 415 V, with neutral link & earth bar ,and taking down unserviceable DB/main switch complete all as specified & as directed.

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fixing MCCB adjustable type 4 pole 415 volts of capacity 100 amps 25 KA all as specified and directed. Make Standard/ Havells/ L & T / MDS/Legrand/HPL

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No BRLEP 25W LED WH (Edge plus series) or its equvalent in Philips, Wipro.

S & F recess mounting LED Endura slim pro plus ceiling light suitable for armstrong/grid ceiling complete capacity 36W, sIze 2'x2' complete all as specified and as directed including taking down the old rusted light fitting. (Make Havells Cat part No : Enduraslimpproplus2x2PLR28/36WLED857MOD & LED DRIVER 36V36WS)

S & F recess mounting LED trim plus ceiling light suitable for armstrong/grid ceiling complete capacity 18W, sIze Ceiling cutout (195x195) mm, height 37 mm complete all as specified and as directed (Make Havells Cat part No : Endura trim plus LHEBGAP5IZ1W018

S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of opening wall/existing location for fixing exhaust fan is deemed to be included in overall rate quoted).

Taking down the existing airconditioning and refixing duly cleaning and servicing complete all as specified and directed.

Supply and fix ceiling fans complete with accessories 230 V , 1200 mm sweep BEE 5 star rated all as specified and as directed. Make : cat part No: Premium Summercool 1200mm (white) of Orient/Crompton

Taking down the exisitng ceiling fan and Refixing duly cleaning and minor servicing of any sweep and cap , applying two coats of synthetic enamel paint incl change of ball bearing complete with connecting accessories and down rod 15mm GI pipe duly modified to embedd the ceiling fan of approx 1.5 mtr heigt from the ceiling complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply and laying & testing and commisioning LT underground cable 3.5 core 35 sqmm 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of following sizes complete all as specified and directed.

M/s MAA BHAIRABI ENTERPRISES

M/s Ats Electricals

M/S SIWALIK AND CO

M/S JAGANNATH SASMAL

M/S. KISHAN ENGINEERING

G.KRISHNA MURTHY AND PARTNERS

M/S S.K GHOSE