Annual Repair of Standard Design Apartment 8 Nos Transit Flats in Officers Colony at Kaithal In Kaithal distt for the year 2020 21

Amount

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in payments, roads, taxitracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132)

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean (HSR 13.14)

Conglomerate floor 40 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.12)

Pvdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.91)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. a) Size of ceramic Glazed tiles 200 X 300mm (HSR 14.92 (a))

12 mm thick cement plaster 1:4 (HSR 15.5)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.7)

Distempering with washable oil bound distemper (of approved manufacture) one coat on old distempered work. (HSR 16.59)

Providing one coats of exterior acrylic emulsion paint. a) 2nd Quality (NS)

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas (HSR 18.30 (b)) Note:- In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

The Avni Co Op l and C Society ltd