COMPREHENSIVE B/R MAINTENANCE TO CERTAIN OTM AND MD ACCN IN OF 322 MED REGT AND 18 ARTY BDE CAMP UNDER AGE B/R-II AT ITARANA

Amount

S&F in repairs Bib taps 15 mm bore Long body fancy type of PTMT high pressure screwed for iron pipe and fixed minimum etc complete all as specified and directed.

S&F in repairs 15mm bore long body bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule etc complete all as specified and directed. Make : Prayag Cat No. 9806 or equivalent make as mentioned in Appendix "D"

S&F in repair 15 mm dia brass chromium plated pillar tap round with fly nut capstan head Long body screwed for 15 mm dia pipeetc complete all as specified and directed. Make : Prayag Cat No. 8702 or equivalent make as mentioned in Appendix "D"

S&F in repairs, 15mm bore angle valve chromium plated, fancy type etc complete all as specified and directed. Make : Prayag Cat No. 8010 or equivalent make as mentioned in Appendix "D"

S & F in repair angle valve two way 15mm bore chromium plated screwed down high pressure with capstan head and flangeetc complete all as specified and directed . Make : Prayag Cat No. 9818 or equivalent make as mentioned in Appendix "D"

S&F in repairs chromium plated brass shower rose with arm etc complete all as specified and directed. Make : Prayag Cat No. BOS-87 equivalent make as mentioned in Appendix "D"

S&F in repairs 15mm bore central hole wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and directed. Make : Prayag Cat No. 9360-N or equivalent make as mentioned in Appendix "D"

S&F in repair 15 mm dia wall mixer for hot and cold water for sink, chromium plated brass fancy type with all connection slieves, capstan head, scrwed down etc complete all as specified and directed. Make : Prayag Cat No. 8055 or equivalent make as mentioned in Appendix "D"

S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for 15 mm bore of pipe etc complete all as specified and directed.

All as per item No.9.00 above but for 20 mm bore pipe etc complete all as specified and directed.

S&F in repair health faucet (Brass) with 1Mtr long tube & hook etc complete all as specified and directed. Make : Prayag Cat No.BEA-41 or equivalent make as mentioned in Appendix "D"

S&F in repair toilet paper holder of of brass, chromium plated fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed. Make : Prayag Cat No. BA-18 or equivalent make as mentioned in Appendix "D"

S&F in repair stainless steel jet for EWC with flexible cord of approved quality etc complete all as specified and directed.

S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 900x600x250mm including fixing with brackets/clamps with screws pattern & design as approved by GE.

S&F in repairs 32 mm bore dia of discharge pipe CP Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) etc complete all as specified and directed.

S&F in repairs 40 to 50 mm bore dia of discharge pipe CP Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) etc complete all as specified and directed.

S&F in repair 32/40 mm dia PVC waste pipe for WHB/Sink of 90 cm long with union etc complete all as specified and directed.

Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal from site etc complete all as specified and directed.

Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal from site etc complete all as specified and directed.

S&F 20 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors etc complete all as specified and directed.

S&F 15 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors etc complete all as specified and directed.

Refixing 20 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) etc complete all as specified and directed.

Refixing 15 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) etc complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe and fixed (min wt 210 gram) etc complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm dia iron pipe and fixed (min wt 142 gram) etc complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450mm long with 2 Nos PVC check nuts with washer etc complete all as specified and directed.

S&F in repairs stainless steel sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm etc complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm et complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in brackets etc complete all as specified and directed.

S&F in repair CI bracket for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets etc complete all as specified and directed.

S&F in repair vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with 'P' or 'S' trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces including L-bend flush pipe etc complete all as specified and directed.

S&F in repairs vitreous chinaware wash down water closet pan Pedestal pattern white including fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket etc complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and aluminium hinging device etc complete all as specified and directed.

S&F in repair CP grating 100 mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair brass chromium plated soap dish etc complete all as specified and directed.

Supply & Fixing in repair towel rail 20mm dia, 60 cm long brass chromium plated with brackets etc complete all as specified and as directed.

S&F in repair of 600 mm x 450mm X 4 mm thick looking mirror mounted on aluminium frame and fixed to wooden plugs with CP screws and washers etc complete all as specified and directed.

S&F in repairs PVC cabinet with looking mirror of and fixed in wall with CP brass screw and cup washer etc complete all as specified and directed.

S&F in repair corner glass shelf 25cm radius with CP bracket and railing of approved quality etc complete all as specified and directed.

S&F in repair glass shelf size (500mmX125mm) with CP bracket and railing of approved quality etc complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 250 to 500 Ltrs capacity of tanks etc complete all as specified and directed. Note : Write date of cleaning and CA No of subject work on water tanks.

All as per Item No.42.00 but capacity exceeding 500 litres but n.exc 1000 Ltrs complete all as specified and directed. Note : Write date of cleaning and CA No of subject work on water tanks.

S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size including dismantling old PVC water tank etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size including dismantling old PVC water tank complete all as specified and directed.

S&F in repairs cover of PVC of capacity 500/1000 ltr water tank etc complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm nominal outside diameter double socketed in any length with rubber ring joints including all fittings/fixtures fixed in trenches or in floor including taking down old existing pipe etc complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, including taking down old existing pipe etc complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius etc complete all as specified and directed.

All as per item No 49.00 above but 75 mm bore etc complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.

Cuttings out old existings hinges any type frm existings steel windows/ ventilators and providings new Pivot/box type steel hinges to fix the old windows/ventilators and making good the etc complete all as specified and directed.

S&F 25mm dia PVC Coated Curtain rod with designer knob fancy type with stainless steel brackets etc complete all as specified and directed.

S&F in repair door closer hydraulically regulated (aluminium extruded body) designation No. 3 universal type suitable for door shutter of 851 to 1000mm width and of weight between 61 to 80 Kg etc complete all as specified and directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed .

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM (1:6), including dismantling old tiles etc complete all as specified and directed.

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) including dismantling old tiles etc complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface 450mmX 300mmX 7mm / 450mmx350mmx7mm mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM (1:4), including dismantling old tiles etc complete all as specified and directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes in CM (1:6) including dismantling old tiles etc complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed.

S&F for Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, ainting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work etc complete all as specified and directed. (Note : New length of frame reputtied shall be measured and paid)

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each etc complete all as specified & directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each etc complete all as specified & directed.

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each etc complete all as specified & directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W Gde E -250 quality 'A' etc complete all as specified and directed.

M&L for mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe 410-W Gde E -250 quality 'A' etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel) etc complete all as specified and directed.

S&F Second class hard wood Palin, solid, straight as in chowk at and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F 35mm thick Flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed

M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8,clause 8.24(a) etc complete all as specified and directed.

S&F 19/25mm thick Flush shutters, solid core construction, with block board ISI marked confirming to IS 1656-2004 with latest amendments & pasted 0.80mm thick mica sheet adhesive used Phenol and pressed by hot pressed on both face of approved shade & colour complete including taking down old wooden shutter of any type etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing etc complete all as specified and directed by Engineer-In-Charge.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings etc complete all as specified and directed.

S&F 100 mm size mild steel butt hinges medium weight cold rolled etc complete all as specified and directed.

S&F 100mm size stainless steel butt hinges medium weight cold rolled etc complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle etc complete all as specified and directed.

S&F 150mm long extruded Aluminium alloy handle etc complete all as specified and directed.

S&F 150mm long Anodised Aluminium tower bolt etc complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy etc complete all as specified and directed.

S&F hasp & staple, safy type aluminium anodised 100mm size including bolts to hinge plate and fixed with screws etc complete all as specified and directed.

S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and dirceted.

S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and dirceted.

M&L for steel ventilators, fixed type shutters, with glazing bars etc complete all as specified and directed.

S&F for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes,MS flats, framed guard bars & similar work etc complete conforming to Fe 290 .Gde-E-165.etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement including taking down old plaster etc complete all as specified & directed.

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) by using scaffolding upto 15m height, surface finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of (1:1:1) shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered including taking down old plaster etc complete all as specified and directed by Engineer in Charge

M&L applying two coats of oil bound distemper on new plastered surfaces on wall including necessary preparation of wall surfaces etc complete all as specified and directed.

M&L applying two coats of cement base paint on walls surface including necessary preparation of wall surfaces etc complete all as specified and directed.

M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces etc complete all as specified and directed.

Dismantling of Stone slabs and tiles laid dry of any description or thickness in floors, aprons, etc complete all as specified and directed.

M&L for chequered pre-polished cement concrete tiles Squared/rectangle 20 to 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors over and including cement screed bedding 15mm thick in cement mortar (1:6) etc complete all as specified and directed.

M&L for 20mm thick granite slab of any colour and shade (table rubbed and polished) including pointing in white cement (1:2) using marble dust , of superior quality set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar 1:4, cutting the edges in bullnosed shaped and polishing of any description or thickness including dismsntling old stone slab complete all as specified and as directed.

M&L for factory made machine pressed precast concrete interlocking paver block coloured glossy finished of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and no pigment over and including 20mm thick sand cusioning etc complete all as specified and directed

M&L for machine cut Kota stone slab flooring 20 - 25 mm thick over 20mm thick screed bed or bedding layer in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling old stone slab etc complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) in benching, coping etc including weathering slightly rounded or chamfered angles including necessary form work and mixing of intergal water proofing compound @ 2% by weight of cement as per manufacture's instruction etc complete all as specified & directed. Note: WPC measured and paid separately

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) .

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base etc complete all as specified and directed.

M&L for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / plinth protections, finished even and smooth without using extra cement incl necessary form work etc complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 12.5mm graded aggregate as in flooring, surface finished fair and even etc complete all as specified and directed.

Demolition of cement concrete (unreinforcement) of any description and in any position not otherwise specially provided for.etc complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required etc complete all as specified and directed. Note : Kerb stone shall be approved by GE.

M&L for applying two coats of synthetic enamel paint on new or old kerb tone surfaces over a coat of primer including preparation of kerb stone surfaces exc 10 cm width or girth, etc complete all as specified and directed.

Demolition of brick work built in cement mortar etc complete all as specified and directed.

M&L for bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:4) etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:6) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) by using scaffolding upto 15m height, surface finished even and smooth without using extra cement etc complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge.etc complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw / 'J' hooks etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screw / 'J' hooks etc complete all as specified and directed.

S&F aluminium powder coated sliding/Openable window made of the following specifications :- (a) Aluminium frame all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 track runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding/openable shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 4 mm thick heat observing glass with suitable EPDM beading and locking clips arrangement. (d) Provn of gauged sliding/openable shutter of size 44 mm x 18 mm x 1.25 mm using Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable stainless screws . Note: Net outer size of window shall be measured.

S&F aluminium powder coated ventilators made of the following specifications :- (a) Aluminium frame powder coated styles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. Note: Net external size of ventilator shall be measured.

Treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Coved fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application over hot blown betumen primer 85/25. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any.

Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The Cost of testing is included in the rates quoted above item No 118.00.

S&F in repair Steel rolling shutters 1.25mm thick laths, with gear operated type with chain wheel and hand chain, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, etc complete all as specified and directed.

S&Fin repair safety lever locks mild steel with 4 levers for rolling shutters etc complete all as specified and directed.

S&F in repair ball bearing for rolling shutters etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide over 10 cm width or girth not otherwise described etc complete all as specified and directed.

Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets etc complete all as specified and directed.

M&L for suspended false ceiling system using 4 mm thick 'E' Board ceiling tiles classic/ designer as approved by GE of size 595 x 595mm (as approved by GE) fixed with and including galvanized iron powder coated GI Grid system suspended from ceiling with provision of galvanized wire 4 mm dia with butterfly clips and wall taping screw i, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, etc complete, all as directed and specified. (a) Size of grid - 600 x 600 mm. (b) Size of main Tee - 39 x 24mm (c) Size of cross Tee - 29X34mm (d) Size of wall angle - 22.20 x 22.20mm

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, etc complete all as specified and directed.

vandana enterprises (BID ID -3086104)

J.J.ENGINEERING (BID ID -3087787)

GAR CONSTRUCTIONS (BID ID -3087422)