Interior and miscellaneous works for augumentation of stundents facilties (Phase-III), Science Block for Hansraj College

Amount

WOOD WORK

Shutter for Under Counter storage

Providing, making and fixing of Shutter for existing under counter area for storage of Labs Area as per drawing enclosed. The Frame is made of of 2nd class teak wood treated with termite resistance chemicals and smooth finish framed partitions as per details comprising of 2nd class teak wood members size 2” × 2” placed vertically and horizontally at a distance not as per existing Granite parition ( Horizontally & vertically) in both direction. Shutter is made up of 18 thick HDHMR board finished with 1mm laminate inside and outside including the cost of S.S.Hinge, Locks & 4" S.S.Handle. All exposed exdges covered by 1 mm thick laminate with suitable adesive. as per direction of engineer. (Front area is measured for payment)

Lockers units

Providing & fixing high wall storage cabinets (Lockers units) in position as per drawing enclosed. The cabinets shall be 24” deep and out of 18 mm HDHRM board. The back and the shutters shall be made out of 18 mm HDHMR board respectively. Shelves & vertical partition to be provided of 18mm thick HDHMR as per requirements inside as per design/ as per drawing. The horizontal shelves & vertical partition width is not more than600mm in both ditrection. All the external and internal surfaces including the edges shall be finished with 1 mm thick laminate. All the necessary fittings like SS hinges, magnetic ball catcher, locking arrangement, S.S. handles,S.S. tower bolts etc. are to be provided and are to be provided as per direction of Engineer-in-Charge / Architect. (Front area is measured for payment)

Under Counter storage for Teacher counter

Providing & fixing storage cabinets 22"x24"x30"in position under the teacher counter. The cabinets shall be 24” deep and out of 18 mm HDHRM board. The back and the shutters shall be made out of 18 mm HDHRM board respectively. One storage with one shelf inbetween having one shutter and one drawers with sliding telescopic channels to be provided inside as per design. All the external and internal surfaces including the edges shall be finished with 1 mm thick laminate. All the necessary fittings like SS hinges, magnetic ball catcher, locking arrangement, 4" SS handles, tower bolts etc. are to be provided as per direction of Engineer-in-Charge / Architect. (Front area is measured for payment)

Bag Storage Unit

Providing & fixing high wall storage cabinets (for bags) in position as per drawing enclosed. The cabinets shall be 24” deep and out of 18 mm HDHRM board. The back shall be of 18 mm HDHMR . The Shelves & vertical partition to be provided of 18mm thick HDHMR as per requirements inside as per design/ as per drawing. The horizontal shelves & vertical partition width is not more than 600mm in both ditrection. All the external and internal surfaces including the edges shall be finished with 1 mm thick laminate. All the necessary fittings are to be provided as per direction of Engineer-in-Charge / Architect. (Front area is measured for payment)

Over Head Wall Storage:

Providing & fixing over Head wall storage cabinets in position as per drawing enclosed. The cabinets shall be 16” deep and out of 18 mm HDHMR board. The back and the shutters shall be made out of 18 mm HDHRM board respectively. Shelves to be provided as per requirements inside as per design/approval. All the external and internal surfaces including the edges shall be finished with 1 mm thick laminate. One Open shelves of 8" wide along the length of storage is to be also provided under the over head storage All the necessary fittings like SS hinges, magnetic ball catcher, locking arrangement, ss handles tower bolts etc. are to be provided and are to be provided as per direction of Engineer-in-Charge / Architect. (Front area is measured for payment)

Low Height Partition

Providing, making and fixing in position high quality 2nd class teak wood treated with termite resistance chemicals and smooth finish framed partitions as per drawing enclosed, as per details comprising of 2nd clas teak wood members’ of size 2” × 2” placed vertically and horizontally at a distance not more than 1½’ c/c. in both directions with 12 mm HDHRM board on both the sides. Partitions shall be finish in laminate (1mm thick) from both the sides of approved colour, finish make and in patterns as shown in the drawing. Partition frame work shall have adequate provisions for the movement of electric/ data cables at desired levels. The complete partitioning work shall be carried out as per approved pattern/ drawing/ design and as directed by the Engineering-in-Charge. (Complete elevation area from one side of the partition to be paid)

Full Ht. Partitions :

Providing, making and fixing in position 2nd class teak wood treated with termite resistance chemicals and smooth finish framed partitions as per drawing enclosed as per details comprising of 2nd class teak members size 2” × 2” placed vertically and horizontally at a distance not more than 1½’ c/c. in both directions with 12 mm commercial ply on both the sides. Alternate member shall reach the ceiling and shall be fixed there to ensure stability of the partition. Partitions shall be finish in laminate (1mm thick) from both the sides of approved colour, finish make and in patterns as shown in the drawing including providing and fixing of 8 mm thick toughened float glasses as per drawing. Provide teak wood moulding of shape and size as shown in the drawing and finish in melamine polish. Partition frame work shall have adequate provisions for the movement of electric/ data cables at desired levels. The complete partitioning work shall be carried out as per approved pattern/ drawing/ design and as directed by the Engineering-in-Charge. (Complete elevation area from one side of the partition to be paid without deductions for glass area)

Edge Moulding:

Providing, making and fixing in position 1 st class teak wood moulding of shape and size (75x30 mm) as shown in the drawing and finish in melamine polish. The complete work shall be carried out as per approved pattern/ drawing/ design and as directed by the Engineering-in-Charge.

Wall panelling (with Laminate ):

Providing, making and fixing in position 2nd class teak wood treated with termite resistance chemicals and smooth finish framed partitions as per details comprising of 2nd class teak wood members’ size 2” × 2” placed vertically and horizontally at a distance not more than 1½’ c/c. in both directions with 12 mm HDHRM board on one side. Members shall reach the ceiling and shall be fixed there to ensure stability of the partition. Partitions shall be finish in laminate 1.0 mm thick on one side of approved colour, finish make and in approved pattern. Provide teak wood moulding of shape and size as shown in the drawing. Panelling frame work shall have adequate provisions for the movement of electric/ data cables at desired levels. The complete panelling work shall be carried out as per approved pattern/ drawing/ design and as directed by the Engineering-in-Charge. (Complete elevation area from one side of the partition to be paid)

Providing and fixing 1.0mm thick laminate over any surface. Laminate to be fixed both on curved and straight surfaces. Laminate shall be of approved shade and pattern including making grooves etc. or as directed by Engineer-in-Charge. For fixing laminate approved adhesive (Fevicol) shall be used. Adhesive shall be applied both on the laminate and on board/ply after proper cleaning/dusting of the surface. Note: For the purpose of payment front area shall be measured.

High Wall Storage:

Providing & fixing high wall storage cabinets in position as per drawing enclosed. The cabinets shall be 22” deep and out of 19 mm HDHRM board. The back and the shutters shall be made out of 18 mm HDHRM board respectively. 18 mm thk HDHMR board Shelves to be provided as per requirements inside as per design. All the external and internal surfaces including the edges shall be finished with 1 mm thick laminate. All the necessary fittings like SS hinges, magnetic ball catcher, locking arrangement, ss handles ( 4"), tower bolts etc. are to be provided and are to be provided as per direction of Engineer-in-Charge / Architect.

Storage Shelves / Partitions:

Providing making and fixing of shelves / partitions. All the shelves / partitions to made out of 19 mm HDHRM board with external surface including the edges laminated with of approved shade of 1 mm thick laminate as per direction of Engineer-in-Charge / Architect.

Table:

Providing making and fixing table of following sizes in 18 mm thick HDHMR Board as per drawing enclosed. Provide drawers and storage cupboards as per design under the table; provide a centrally placed keyboard drawer wherever required below the main tabletop. All the drawers to have bottom of 6 mm and sides of 12 mm HDHRM board. Make necessary cutouts for electrical and data cables wherever required. Provide groove patties, mouldings etc. as per drawings. The teak wood mouldings and lippings on edges to be finished in melamine polish as per instructions. The tabletop, sides and the front portions, inner sides of the table and drawers is to be finished with 1 mm thick laminate of approved shade and quality. All the drawers to have bottom of 6 mm and sides of 12 mm HDHMR board and are to be provided with channels and locks as specified. Provide the necessary hardware like hinges, magnetic ball catcher handles.

Table size 5’6”×2’6”×2’6”height

Table size 4’0”×2’0”×2’6”height

Table size 5’0”×2’0”×2’6”height

Computer work stations 800 mm wide 750mm high with space for CPU and 150 mm high cable alley on table top

Work stations 800 mm wide 750 mm high with 150 mm high cable alley on table top

Table with teak wood frame with melamine polish. The tabletop, sides and the front portions, inner sides of the table to be finished with 1 mm thick laminate of approved shade and quality. 900 mm wide 750 mm high

CPU Trolley:

Providing and placing metallic CPU trolley of size 220 x 250 x 250mm having adjustable width and lockable castors made of 1.2 mm thick steel sheet powder coated with minimum powder coating of 45 microns in approved colour complete as per direction of Engineer-in-charge.

Miscellaneous work

Pin-Up Boards:

Providing & fixing pin-up boards/ notice Boards in the cabins made out of 1 ½” × 1 ½” Teak wood ( 1 st class) members with soft board & approved colour tapestry finished in melamine polish of approved shade complete as per the design.

Blinds

Supplying and fixing manual roller blind of make Vista / Mac or equivalent aproved fabric with all necessary fittings complete in the direction of engineer-in-charge. (Basic rate 4200/-sqm)

Granite work

Providing and fixing 18mm thick Granite stone of any color saw cut, mirror polished, pre moulded and pre polished, machine cut of required size, approved shade, color and texture laid over existing wooden Table of Labs of science block with suitable addesive for fixing of granite and wood work including rubbing, full round edge moulding and polishing of edge to give high gloss finish etc complete at all level or any size as per direction of engineer. ( Basic Price Rs. 250/- sqft.)

Providing and fixing 18mm thick Granite stone ( Sandwich type/ Double ) Shelves ( Horzontally & vertically ) for keping/storing chemical bottles of approved color saw cut, mirror polished, pre moulded and pre polished, machine cut of required size, approved shade, color and texture laid over existing counter of chemistry Labs of science block with suitable addesive for granite fixxing including rubbing, full round edge moulding and polishing of edge to give high gloss finish etc complete at all level or any size as per direction of engineer. ( Basic Price Rs. 250/- sqft.)

Tile Work

Providing and laying Heavy Duty vitrified floor tiles (Stone Grade) Size of Tile 600x600 mm having thickness 16mm with 08mm thick joint ( with PVC Spacer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) complete. including the cost of Grout of joint. (Make -Somany/ Pavit/ Kajaria/ Asian) (The Basic Price Rs. 125- sqft)

Grouting the joints of flooring tiles having joints of 08 mm width x 16 mm depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including use of masking tape, filling/ grouting, cleaning and finishing complete as per direction of Engineer-in-charge for flooring of tile 600x600 mm / 300 x 300 mm .

Providing and laying tactile tile (Linear / Button) (for vision impaired persons as per standards) of size 300x300x15mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make inivory plus shades in for / indoor outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja / sheeting 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight,

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, dash fasteners etc.all complete as per architectural drawings and the directions of Engineer-in-charge. Make:- Hindalco, Indalco, Jindal, Mahavir

For fixed Portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket hinges, tower bolt, sliding door bolt, door stoper door closer etc. required. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge : Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness

S.S Grab Bar (Handrails) of 35mm Dia may be provided in the handicapped Toilet for the support required for the movement of Wheel chair at the height of 750 MM from finish floor including all nessary fitting required for fixing as per Handicapped washroom.

Fume Hood

SITC in position of FUME HOOD :- Outer Dimension : 1800 (L) x 900(W) x 2400-2500(H) mm, Inner Dimension : 1500 (L) x 750(W) x 1220(H) mm Sash Opening : 900 mm Design Basis : Comply to ASHRAE -110 Standard Outer Body : CRCA sheet (20 gauge) epoxy polyester powder coated Inner Lining : Internal lining suitable for acidic fumes Scaffold : Imported (PP) scaffolding racks for fume hood Baffle : Baffle at the back with 3 point suction system (light, normal, heavy fumes) for smooth exhaust of fumes. Sash (Shutter): Vertical rising. Sash movement with counter weight balance mechanism. Made of safety toughened glass.(5 mm) Work Top : 18 mm thick dished black granite top with 12mm thick ply having provision to fix drip cup. Air flow monitor : AFA 1000 Suction : 800-1000 CFM

Electrical Arrangements : NO/NC switch for customer’s blower starter 6/16 Amp. Socket Single Phase, 16 Amp.MCB Single Phase & Respective internal wiring terminated at fume hood top at rear end for further connection–North West Make. – as per client approved make list Fume Hood Utility: Fitted with service valves, color coded knobs, and Services nozzles made from brass materials Nitrogen – 1 nos. Vacuum – 1 nos. Raw water – 1 nos. With PP sink – 1 nos.with round cutting in granite Illumination : Vapor proof LED light with switches Butterfly valve for initial exhaust manual setting. Centrifugal Type Blower: Crompton Make Motor. Housing FRP (1 HP –3 Nos. &. down touch glass SS304 railing type DUCTING: Suitable ducting with fittings

Electrical Works

Wiring for 5 amps light plug outlets with 2.5 sq.mm FRLS PVC insulated stranded copper conductor wires with 1.5 sq mm earth wire in P.V.C. Conduits in ceiling/walls/floor as directed including providing 1no. 6 amps flush type 5 pin socket and 1no. 6 amps switch with cover plate, 5 sided G.I boxes and earthing complete as required. Make: Havells, K K Kable, Polycab, Finolex Conduit Make:- Supreme, Prakash, Setia. Make:- Anchor Roma, North West, Legrand.

Wiring for 5 amps light plug outlets with 2.5 sq.mm FRLS PVC insulated stranded copper conductor wires with earth wire in P.V.C. Conduits in ceiling/walls/floor as directed including providing 2nos. 6 amps flush type 5 pin socket and 1no. 6 amps switch with cover plate, 5 sided G.I boxes for housing switches, sockets and earthing complete as required. Make: Havells, K K Kable, Polycab, Finolex Conduit Make:- Supreme, Prakash, Setia. Make:- Anchor Roma, North West, Legrand.

Wiring for 5 amps light plug outlets with 2.5 sq.mm FRLS PVC insulated stranded copper conductor wires in P.V.C. Conduits in ceiling/walls/floor as directed including providing 3nos. 6 amps flush type 5 pin socket and 2no. 6 amps switch with cover plate, 5 sided G.I boxes for housing switches, sockets and earthing complete as required. Make: Havells, K K Kable, Polycab, Finolex Conduit Make:- Supreme, Prakash, Setia. Make:- Anchor Roma, North West, Legrand.

Wiring for Sockets outlet points with 4.0 sq mm FLRS PVC insulated stranded copper conductor wires in P.V.C. conduit/ wall / ceiling / floor ducts as directed including providing 2nos. 6 amps flush type 5 pin socket with switch and 1no. 16 amps flush type 5 pin socket with switch 2 mm thick M.S. box to house the above duly painted and earthing complete as required. Wire Make: Havellas K K Kable Polycab

Providing and fixing in position suitable 1.6 mm thick G.I. outlet box with 1 No RJ - 45 for Data outlet including crimpling with all fixing accessories as required.

Supply and fixing of 1.6 mm thick G.I Box with Hylum sheet over outlets as required.

Providing and fixing in position suitable 1.6 mm thick G.I. outlet box with 2 Nos RJ - 45 for Data/ voice outlet including Hylum sheet & crimpling with all fixing accessories as required .

Providing and fixing in position the following PVC conduits including all conduit accessories concealed in false ceiling/ceiling as required including 5 sided 1.6mm thick M.S. junction boxes and 3mm thick Perspex sheet cover plate complete with G.I. pull wires in the run of conduit.

20 mm dia conduit

25 mm dia conduit

Race Way

Supply & installation of underfloor raceways of extruded PVC rectangular sections of following sizes inclusive of cutting, chasing & refinish with cement plaster in PCC/ IPS flooring

100 mm x 38 mm x 2 mm thick

Supply & Installation under-floor junction boxes fabricated from 14 gauge CRCA Mild steel, duly epoxy painted / powder coated after 7 tank processes, with screwed recessed top covers, screwed plates on four sides, of the following sizes, as per specifications.

300 mm x 300 mm x 40 mm

Supplying and fixing of Lighting fixtures

Supplying, installation testing & commissioning of following Lighting fixtures complete.

2'x2' Surface light/recesse Led Light 32 watts including all fixture as per approved material list

100MM Dia light/recesse Led Light watts including all fixture as per approved material list

160MM Dia light/recesse Led Light watts including all fixture as per approved material list

Projector Work

Projector Screen

Tech Specs

Screen Housing : Aluminium Case

Motor : Heavy Duty Tubular Synchronous Motor - Quiet, Zero-Vibration

Screen Fabric : Premium Matte White & Premium Grey Beaded

Operation : Electric with Remote Switch

Size : 10'x8'

Approved Make : Telon or equivalent

Projector Screen

Tech Specs

Display system : SXRD panel, projection system

Light Output : 1800 lm

Display elements

Effective display size : 0.61” x 3

Effective pixels Full HD : (1920x1080) x3 6,220,800 pixels

Projection lens

Zoom / Focus Manual (Approx. 1.6 x) / Manual

Throw Ratio 1.36:1 – 2.16:1

Lens shift Manual, V:+/-71% / H:+/-25%

Light source : High-pressure mercury lamp, 215 W type

Screen size 40” to 300”

Reality Creation : YES (Full HD Reality Creation)

Lamp life : 6000h (Lamp mode: Low)

3D capability Yes

3D emitter Built-in RF transmitter

3D glasses TDG-BT500A (RF type : Optional)

Colour correction Yes

Picture modes : 9 modes

Gamma modes : 10 modes

Low latency mode : Yes

Panel Alignment : Yes (Shift / Zone)

Input/ Output

HDMI : Yes (2 inputs)

RJ45 : Yes (IP & Web control) -

USB : Yes (firmware update)

Remote : RS-232C, D-sub 9-pin (female)

IR IN Mini Jack

Acoustic noise 22 db

Approved Make : SONY VPL HW 45 or equivalent

Approved Make : SONY VPL HW 45 or equivalent

Approved Make : SONY VPL - VW 290 ES

Projector Lift

Tech Specs

Teon Projector Lift Model PL 240031M

Providing & fixing the Ceiling Mount Bracket Kit/stand 4 Feet Adjustable ( Maximum Weight Capacity - 50 Kg) of Material Alloy Steel

Portable Ceiling /wall mounted/ projector stand adjustable - 2 ft to 4ft Heavy Duty Steel Projector Stand. 2 ft + 2 ft = 4 ft adjustable with cable can be put through the drop pole very loght and cable of supporting the above mention wide of projector.Complte screws, Universal screw which suit projector

Providing & fixing the Ceiling Mount Bracket Kit/stand 3 Feet Adjustable ( Maximum Weight Capacity - 50 Kg) of Material Alloy Steel

Portable Ceiling /wall mounted/ projector stand adjustable - 3 ft to 6 ft Heavy Duty Steel Projector Stand. 3 ft + 3 ft =6 ft adjustable with cable can be put through the drop pole very loght and cable of supporting the above mention wide of projector.Complte screws, Universal screw which suit projector

CCTV Work

32CH 4 SATA H.265+ 4K Network Video Recorder Up to 32 channel IP camera input Max 320Mbps incoming bandwidth Smart H.265+/H.265/Smart H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 4 SATA HDDs up to 10TB Each, 3 USB Ports (2 USB 3.0, 1 USB 2.0) 2 HDMI / 2 VGA simultaneous video output Support Multi-brand network cameras ONVIF Version 2.4 conformance

8CH H.265+ 4K Network Video Recorder Up to 8 channel IP camera input Max 320Mbps incoming bandwidth Smart H.265+/H.265/Smart H.264+/H.264/MJPEG codec decoding Up to 12MP resolution preview and playback Support 2 SATA Ports up to 10TB Each, 2 USB Ports (1 USB 3.0) HDMI / VGA simultaneous video output Support Multi-brand network cameras ONVIF Version 2.4 conformance

4 MP IP WDR IR Network Dome Camera 1/2.7” 4Megapixel PS CMOS Image Sensor 25/30fps@4M(2688×1520) H.265+ and H.264+ triple-stream encoding WDR(120dB), Day/Night(ICR), 3D-DNR, ROI, AWB, AGC, BLC IR Range of 50 Mtrs, IP67, IK10, Micro SD Card, PoE Support Starlight Technology

4 MP IP WDR IR Network Bullet Camera 1/2.7” 4Megapixel PS CMOS Image Sensor (0.9407 centimters) 25/30fps@4M(2688×1520) H.265+ and H.264+ triple-stream encoding WDR(120dB), Day/Night (ICR), 3D-DNR, ROI, AWB, AGC, BLC, HLC 2.8mm Lens (3.6mm, 6mm Optional) IR Range of 50 Mtrs, IP67, Micro SD Card, IP67, PoE Built-in Mic Support Starlight Technology

6TB HDD Surveillance

9U Wall Mount Rack with PDU 6 Socket with Cooling FAN 2 Nos Wall Mount Rack 9U 630mm deep 19". 1.6mm Vertical Mounting Rail with clear 'U' Marking. 0.8mm CRCA Sheet. Cooling Fan options (min 2). Cable entry/exit provision (minimum 2) at top and bottom with rubber at edges. Front with Toughened Glass Door & Lock (5mm). Powder coated Color- RAL- 7035. Wall Mounting Kit.

43" UHD 4K LED TV (24x7) with 3 Mtr HDMI Cable SAMSUNG/LG

32" FHD LED TV (24x7) with 3 Mtr HDMI Cable SAMSUNG/LG

5 GHz 300Mbps 13dBi Indoor/Outdoor CPE (For Lift) Built-in 13dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 23dBm/200mw System-level optimizations for more than 15km long range wireless transmission

24 Port 10/100/1000Mbps Gigabit Layer 2 Managed Switch

8 Port 10/100/1000Mbps Gigabit PoE Switch

8 Port Gigabit Switch

1 KVA Offline UPS for PoE Switches

RJ 45 Connector

12V 2Amp SMPS Adapter

1KVA Online UPS with 60 Minute Power Backup

12V 42Ah Battery

CAT 6 UTP 24 Port Loaded Patch Panel

4U Indoor/Outdoor Wall Mount Rack with PDU for PoE Switch (For keeping Switch & UPS)

CAT 6 4 Pair Copper Cable Armoured

2 Core 1.5 sq mm Power Cable

25mm Medium PVC Conduit Pipe with Accessories

IP66 Enclosure Box for IP CCTV

CAT-6 Cable laying Charges

PVC Conduit Laying Charges

IP CCTV Camera Installation Charges with 1 Year onsite Warranty Support

VRV HVAC Works

ITC of VRV Variable refrigerant Volume modular type outdoor units equipped with highly efficient inverter type compressor(s) , air coolled condenser with special precoated fins type heat exchanger and direct drive low noise propeller fan system suitable for heating / Cooling.Indoor and outdoor units complete as per quantity given below. Electrical equipments suitable 415V 50Hz power supply. Inclusive of Stand.

Outdoor Units.

Installation and gas charging - first charge refrigerant (R-410A or equivalent) with lubricating oil.

SITC of Indoor Units (Nominal Capacity).

Slim type Indoor Unit with fittings equipped with pre- filter, fan section with low noise fan and multispeed motor, drain pump complete as reqd. (Including Corded Remote & Refnets). Vendor to supply shop drawings before starting the works

FXAQ63ARVE6

FXAQ50ARVE6

SITC of Wired Remotes including fixing on the wall.

Refrigerant Piping

SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd.

34.9 mm O.D (insulation -19mm thick)

28.6mm O.D (insulation -19mm thick)

22.2mm O.D (insulation -19mm thick)

19.1mm O.D (insulation -13mm thick)

15.9mm O.D (insulation -13mm thick)

12.7mm O.D (insulation -13mm thick)

9.5 mm O.D (insulation -13mm thick)

6.4mm O.D (insulation -13mm thick)

SITC of Covered GSS Cable Tray of suitable size for exposed piping . 300 mm width

Drain Piping

SITC of Rigid PVC Piping complete with fittings, supports as per specifications and duly insulated with 6mm thick closed cell nitrile rubber.

25 mm dia

Electrical

Electrical Panel For Supply to OD Units.

Design, fabrication, assembling, wiring, supply, testing at works, packaging, forwarding to site, installation, testing & commissioning of Main LTcum synchronizing panel /Main distribution panels / sub-distribution panels, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, from 3b consutruction, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary. 16 gauge CRCA sheet steel shall be used for final distribution panels. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 No. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels.

315 Amps 4 pole MCCB with following accessories:

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

500 Amps TPN Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set

25 Amps 4 pole MCCB. 10 Nos +2 Spare

63 Amps 4 pole MCCB. 2 Nos

40 Amps 4 pole MCCB. 2 Nos

Providing & fixing / Laying AL. Cable 4 core 150Sqmm

Providing & fixing control cum transmission wiring in Heavy Duty PVC 20/25 mm conduit buried in wall or in suitable surface, between indoor units and outdoor units.

2 Core x 1.5 Sqmm Copper wire/Cable

4 Core x 10 Sqmm Copper wire/Cable

Isolator with weather proof box (25A to 63A)

Supply of VRV Variable refrigerant Volume modular type outdoor units equipped with highly efficient inverter type compressor(s) , air coolled condenser with special precoated fins type heat exchanger and direct drive low noise propeller fan system suitable for heating / Cooling.Indoor and outdoor units complete as per quantity given below. Electrical equipments suitable 415V 50Hz power supply. Including stands etc.

Outdoor Units.

10 HP Top discharge

SITC of Indoor Units (Nominal Capacity) (Including Corded Remote & Refnets

Slim type Indoor Unit with fittings equipped with pre- filter, fan section with low noise fan and multispeed motor, drain pump complete as reqd. (Including Corded Remote & Refnets). Vendor to supply shop drawings before starting the works

FXAQ63ARVE6

FXAQ50ARVE6

Refnets

SITC of Wireless Remotes

HVAC for zogolgy Labs

SITC of split type Air conditioning (5 star rated) including pressure test ith N2 gas, vaccumining , commissioning of AC and cabling betwwen indoor and out door Unit. Make : Daikin, Loyyed, O-General , Samsung .

1.8 TR inverter AC

Supply and installation of copper piping including the Nirile insulation of Air Conditioning unit.

Iron base frame wall / roof mounted stand for out door unit at any height on external wall of Building.

Supply and fixing the Automatic voltage stabilizer cap 4.0 KVA including all necessary cables, conduiting and chiseling of wall

Supply and fixing of PVC drain water piping complete with fittings, support as per specification and insulated with 6 mm thick insulated with XLPE Foam closed cell cross linked polythene insulation.

25 mm dia

Supply and fixing of perforated type GI cable tray of the following sizes as per specifications.. MAKE: SRG / ADITYA

150 mm x 50 x 1.6 mm thick with Cover for running copper pipe

Hostel Furniture

Providing & placing in position the hostel bed of box type storage of size 1800mm(L) x 900mm(W) x 450(H) mm. The Design of Bed is as per drg enclosed. The framing is made up of 1st classTeak wood of size 50x75mm and internediate faming is of size 50x30mm. The front, back , bottom and top of made up to 20 mm thk commerrical board. All exposed surface is finished with 1mm thk laminate and remaining surafe is finished with 0.8 mm thk. laminate. The top of bed should be openable inclding SS continous piano hing with 2 nos of handles. The All edges are finshed with 1 st classTeak wood margin/ lipping & with all necessary fittings of required size as per direction of Engineer - in- charge/ Architect

Providing and placing in position the wooden cub-board of size 600mm(L) x 600mm(B) x 2100 mm(H) made up of 18mm thk HDHMR Board as per drawing enclosed.1no of drawer of Depth 125mm is provided with s.s. sliding channel & ss Hansdle of 100mm length. All exposed surface os finished with 1 mm thk. laminate & remaining surface is finiashed with 0.8 mm thk laminate. All edges are finihsed with laminate/ pvc edge banding as per direction of Architect. The bottom edhe is finsged with PVC edge banding. All the necessary fittings like SS hinges, magnetic ball catcher, locking arrangement,S.S.Sliding channel, S.S. rod for cloth hangers with fitting /side supports, S.S. handles, S.S. tower bolts etc. are to be provided and are to be provided as per direction of Engineer-in-Charge / Architect.

Providing and placing in position the reading table of size 750mm (L) X 600mm (W) x 750mm (H) made up of 18mm thk. HDHMR Board . Design of Table is as per drawing enclosed. All External & internal surafce is finished with 1.0 mm thk. Laminate of approved shade. Alledges is finisged with laminate. Botton edge is finshed with PVC edge banding with rubber shoe.

Dinning Table:- Supply and fixing in position of wooden Dinning table of size (1500mm (L) x 750mm (W) x 750mm(H) standard frame made out of teak wood 4"x2" and legs made out of 3"x3" duly melamine polished. Top Made out of 19mm thick ply commercial block board pressed with 1mm thick laminate. wood work is with duly finished with melamine polish of approved shade.

Aims Buildmart Pvt Ltd

Intermarc

Asha Enterprises Pvt. Ltd.

Sanjeev Furnishers Pvt Ltd.

SAHAI EXCLUSIVE CONTRACST PVT. LTD.

NEW AGE ACOUSTICS PVT LTD

SHILPI TECHNOCRATS LLP

M/s S.K.Industries