Renovation of a room of store section in Administrative Building at NBRI, Lucknow.

Amount

Dismantling of existing Mosaic flooring and skirting including removal of unserviceable material up to dumping ground within a lead of 50 mtr. as directed.

Chiselling/Tacking of floor at reqd. interval for making rough for proper bonding with of tiling including disposal of rubbish up to dumping ground with in 50m lead as directed.

Dismantling of existing wooden door shutter including refixing after laying of vitrified tile floor including cutting of door, making in size etc. complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ Sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm .

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing & fixing at all height tiled false ceiling with providing and fixing of frame work Armstrong or equivalent make. The frame work shall be special section Galvanized powder coated 24mm plain Tee grid as per manufactures specification. The size of the grid shall be 600x600mm and laying of ceiling Gypsum tile 7 mm thick India Gypsum or eqvt. make in the grid including where ever required cutting / making / opening for light fittings. The job includes all T&P etc. complete for proper completion of work.

Note:-Rates should be quoted inclusive of all Taxes, GST @ 18% etc.

harpal singh

Pranav Kumar

M/S GRAFH ENGINEERS