REPAIR, RECANNING AND POLISHING OF WOODEN FURNITURE UNDER GE GUWAHATI

Amount

REPAIR SIDE BOARD DRG NO. FD-241(M)/372

M&L for removing old unserviceable to Top of Side Board board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked of size 1220mm L x 455 mm W complete as shown on drawing and as specified.

M&L for removing old unserviceable Side of Side Board and S&F of pre laminated particle board 18 mm exterior grade ISI marked of size 455mm W x 635 mm H complete as shown on drawing and as specified.

M&L for removing old unserviceable Bottom of Side Board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked of size 1220mm L x 455 mm W complete as shown on drawing and as specified

M&L for removing old unserviceable Drawers of Side board and S&F of pre laminated particle board 18 mm exterior grade ISI marked 360mm L x 455 mm D x 75/140/150/180mm H and 6 mm commercial plywood 455 mm D x 360 mm L at the base of each drawer complete as shown on drawing and as specified.

M&L for removing old unserviceable Leg frame of Side Board and S&F of 2nd class hardwood of same size and shape duly finished/smoothened complete all as specified and shown in drawing.

M&L for removing old unserviceable Back of Side Board and S&F of new 6 mm thick commercial BWR plywood 1220mm L x 635 H complete as specified and shown on drawing.

M&L for removing old unserviceable shutter cup board of Side Board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked 360mm L x 600 mm H shutter. The shutters shall be provided with 4mm thick 2nd hardwood edging all round, including polishing with two coats of french polish and each cupboard to be to be fixed with hinges of approved quality. complete as specified and shown on drawing.

M&L for removing old unserviceable knobs of Side board and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO CHAIR DINING FD-16(M)/279/228

M&L for removing old unserviceable Front Legs of Chair Dining and S&F of new legs of made out of 2nd class hard wood similar in size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair Dining and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Front / Side / Rear Rails of Chair Dining and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back Rest of Chair Dining and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back stiffner of and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for assembling the repaired chair dining and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed.

M&L preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR DINING WITH CUSHION SEAT MAP FD/E6/MAP/04/FDMAP-II/04

M&L for removing old unserviceable Front legs of Chair Dining with cushion seat and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair Dining with cushion seat and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of Chair Dining with cushion seat and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back stiffner of Chair Dining with cushion seat and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing of old Tapestry and S&F of new one of best quality tapestry, colour approved by Engr-in-Charge including stitching in size over cushion as specified and shown on drawing. Note :- Rate of Tapestry cloth to be minimum of Rs 350 /- per Metre .

Removing the exising worn out seat cushion and providing new seat cushion with 75 mm thick, 32 density foam with fabric on seat of 12mm th Ply 32 density and fixing in the seat for Chair Dining with cushion seat (MAP) complete as specified and shown in drawing and as directed.

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR EASY (FD-17(M) / 229

M&L for removing old unserviceable Front legs of Chair Easy and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair easy and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of Chair easy and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of Chair Easy and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable side rail of back of Chair easy and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for assembling the repaired chair easy and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed.

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR WRITING (FD-20(M) / 250 / 280)

M&L for removing old unserviceable Front legs of Chair writing and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair writing and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of Chair writing and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for removing old unserviceable Front /Side / Rear Rails of Chair writing and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.Make:- Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable side rail of back of Chair writing and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .Make:- Bansum or equivalent as approved by Engr-in-Charge

M&L for assembling the repaired chair writing and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed. Make:- Bansum or equivalent as approved by Engr-in-Charge

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

M&L for Recanning all type of wooden chairs , Stool Dressing , Bin soiled linen etc after removing the old cane and tightening of frames and weaving with new white plastic cane with 1.8mm wide oval type and 3 mm wide oval type for boarder all along the frameof approved quality complete as per pattern shown on drawing and as specified FD-279/228/16(M)/229/250/280282/244. Note:- Cane shall be of plastic strips of superior quality , type-I (HDPE) white or cream as directed by Engr-in-Charge and of uniform width confirming to IS-5387 . Make:- Maharasthra Cane /New India Plastic

REPAIR TO PEG TABLE (FD-25(M) / 227/384)

M&L for removing old unserviceable Top of Peg Table and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked 450mm L x 300mm W complete with 4mm thick 2nd class hardwood edging all around as shown on drawing and as directed.

M&L for removing old unserviceable Leg of Peg Table and S&F of new legs made of 2nd class hardwood 380mm long as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long Rails of Peg Table and S&F of new long rails 450mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for removing old unserviceable Short Rails of Peg Table and S&F of new short rails 300mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Peg Table all as shown on drawing and as directed.

REPAIR TO TABLE DINING 6 PERSONS (FD-273)

M&L for removing old unserviceable Top of Table Dining 6 Pers 1500mm x 900mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Dining 6 Pers 1500mm x 900mm and S&F of new legs made of 2nd class hardwood 760mm height 75mm x 40mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long Rails of Table Dining 6 Pers 1500mm x 900mm and S&F of long rails 1500 mm 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.Make:-Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Short Rails of Table Dining 6 Pers 1500mm x 900mm and S&F of short rails 900mm long 45mm x 90mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Dining 6 Pers 1500mm x 900mm all as shown on drawing and as directed.

REPAIR TO TABLE DINING 8 PERSONS (FD-30(M) / 273)

M&L for removing old unserviceable Top of Table Dining 8 Pers 1800mm x 900mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Dining 8 Pers 1800mm x 900mm and S&F of new legs made of 2nd class hardwood 760mm height 75mm x 40mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long rails of Table Dining 8 Pers 1800mm x 900mm and S&F of long rails 1800 mm 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for removing old unserviceable Short rails of Table Dining 8 Pers 1800mm x 900mm and S&F of short rails 900mm long 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Dining 8 Pers 1800mm x 900mm all as shown on drawing and as directed.

REPAIR TO TEAPOY (FD-278/382/232) 600mm x 450mm x 540mm (FD-278/382/232)

M&L for removing old unserviceable Top of Teapoy 600mm x 450mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Teapoy and S&F of new legs made of 2nd class hardwood 540mm height 60mm x 30mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Teapoy all as shown on drawing and as directed.

REPAIR TO TABLE BED SIDE MAP FD/E6/MAP/15

M&L for removing old unserviceable Top of Table Bed Side MAP and S&F of new top 450mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Bed Side MAP and S&F of new side 500mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Back of Table Bed Side MAP and S&F of new back made of 6 mm thick commercial BWR plywood 450mm x 450mm complete as specified and shown on drawing.

M&L for removing old unserviceable Drawers upper and lower for Table Bed Side MAP and S&F of new drawer made of 12 mm thick commercial BWR plywood 450mm x 450mm x 100/350mm with 6 mm thick commercial BWR plywood at the base 450mm x 450mm complete as specified and as shown on drawing.

M&L Preperation of old painted steel surfaces and applying two coats of synthetic enamel paint including providing of rubber shoes to Table Bed Side MAP complete as specified and shown on drawing and as directed

M&L for removing old unserviceable Handles and S& F of new handles for drawers for Table Bed Side MAP complete as specified and shown on drawing and as directed Make:- Sample as approved by Engr-in-Charge

REPAIR TO TABLE CENTRE FD-274 (900mm x 450mm x 400mm

M&L for removing old unserviceable Top of Table Centre and S&F of new top 900mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Centre and S&F of new legs made of 2nd class hardwood 400mm height 60mm x 30mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top long rails of Table Centre and S&F of new ones made of 2nd class hardwood 900mm height 20mm x 50mm as shown on drawing and as directed. Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Top short rails of Table Centre and S&F of new one made of 2nd class hardwood 450mm height 20mm x 50mm as shown on drawing and as directed. Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Bottom Long stiffners of Table Centre and S&F of new one made of 2nd class hardwood 900mm height 20mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Bottom short stiffners of Table Centre and S&F of new one made of 2nd class hardwood 900mm height 20mm x 50mm as shown on drawing and as directed.Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Centre all as shown on drawing and as directed.

REPAIR TO TABLE DRESSING LADIES (FD-32(M) / 251)

M&L for removing old unserviceable Top of Table Dressing Ladies and S&F of new top 900mm x 380mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Dressing Ladies and S&F of new side 300mm x 380mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Drawers upper and lower for Table Dressing Ladies and S&F of new drawer made of 12 mm thick commercial BWR plywood 150mm x 380mm x 350mm with 6 mm thick commercial BWR plywood at the base 350mm x 380mm complete as specified and as shown on drawing.

M&L for removing old unserviceable Leg frame of Table Dressing Ladies and S&F of 2nd class hardwood of same size and shape duly finished/smoothened complete all as specified and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable/broken Mirror (366x1220 mm) with frame and S&F of new mirror 5mm th Electro copper plated mirror of polished sheet glass covered on edges and 6mm th plywood at the back and frame made of 2nd class hard wood 45x40 mm complete as specified and as shown on drawing.

M&L of old unserviceable/broken Glass pane / shutter of Table Dressing Ladies and S&F of new one 3mm thick transparent type supported by alumimium channel as specified and as shown on drawing.

M&L for removing old unserviceable Back of Table Dressing ladies and S&F of new back made of 12 mm thick commercial BWR plywood 900mm x 300mm complete as specified and shown on drawing.

M&L for removing old unserviceable knobs of Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as directed. Make:- As per sample approved by Engr-in-charge

REPAIRS TO TABLE DRESSING GENTS FD-230

M&L for removing old unserviceable Top of Table Dressing Gents and S&F of new top 900mm x 300mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Dressing Gents and S&F of new side 150mm x 300mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Drawers upper and lower for Table Dressing Gents and S&F of new drawer made of 12 mm thick commercial BWR plywood 300mm x 300mm x 150mm with 6 mm thick commercial BWR plywood at the base 300mm x 300mm complete as specified and as shown on drawing.

M&L for removing old unserviceable/broken Mirror (380x760mm) with frame and S&F of new mirror 5mm th Electro copper plated mirror of polished sheet glass covered on edges and 6mm th plywood at the back and frame made of 2nd class hard wood 35x25 mm with rawl plugs both at the top side for hanging complete as specified and as shown on drawing.

M&L for removing old unserviceable Back of Table Dressing ladies and S&F of new back made of 12 mm thick commercial BWR plywood 900mm x 150mm complete. Metal Clips to be provided on each repaired Table Dressing Gents for hanging on the wall as specified.

M&L for removing old unserviceable knobs of Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO TABLE WRITING (FD-275) (1145x600x760mm)

M&L for removing old unserviceable Top of Table writing and S&F of new top 1145mm x 600mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Writing and S&F of new legs made of 2nd class hardwood 760mm height 35mm x 55mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top Short rail of Table Writing and S&F of new ones made of 2nd class hardwood 600mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Top Long rails of Table Writing and S&F of new ones made of 2nd class hardwood 1145mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners side bottom of Table Writing and S&F of new ones made of 2nd class hardwood 600mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners long bottom of Table Writing and S&F of new ones made of 2nd class hardwood 1145mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Drawers for Table Writing and S&F of new drawer of the same shape and size made of 12 mm thick commercial BWR plywood with 6 mm thick commercial BWR plywood at the base complete as specified and as shown on drawing.

M&L for removing old unserviceable Cup board of Table Writing and S&F of new one made of pre laminated particle board 18 mm exterior grade ISI marked. The shutters shall be provided with 4mm thick 2nd hardwood edging allround and each cupboard to be provided with magnetic catcher and cupboards to be fixed with hinges of approved quality complete as specified and as shown on drawing.

M&L for removing old unserviceable knobs of Table writing and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO SOFA SET 4 & 5 SEATER WITH CUSHION (FD-281)

M&L for removing old unserviceable cushion cover of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new cushion cover of size 560mm x 530mm x 100mm made of tapestary cloth, colour as approved by Engr-in-Charge including uphoistering complete as specified and as shown on drawing. Note :- Rate of Tapestry cloth to be minimum of Rs 350 /- per Metre .

M&L for removing old unserviceable CUSHION of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new cushion of size 560mm x 530mm, 100mm thick, 32 density for seat and back Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as shown on drawing.

M&L for removing old unserviceable Front Legs of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Front legs made of 2nd class hardwood as shown on drawing and providing PVC white shoe to be on leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear Legs of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Rear legs made of 2nd class hardwood as shown on drawing and providing PVC white shoe to be on leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Hand rest made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Front /Side / Rear Rails made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Top rail of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Top rail made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for preperation of surfaces of SOFA SET 4 & 5 SEATER WITH CUSHION by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface cpmplete all as shown on drawing and as directed.

REPAIR TO TABLE 3' X 2' (900 X 600mm) WITH DRAWER FD-283

M&L for removing old unserviceable Top of Table 3' X 2' (900 X 600mm) and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing

M&L for removing old unserviceable Legs of Table 3' X 2' (900 X 600mm) and S&F of new legs made of 2nd class hardwood 760mm height as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top Short rail of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Top Long rails of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners side bottom of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners long bottom of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Drawers for Table 3' X 2' (900 X 600mm) and S&F of new drawer of the same shape and size made of 12 mm thick commercial BWR plywood with 6 mm thick commercial BWR plywood at the base complete as specified and as shown on drawing.

M&L for preperation of surface of 3' X 2' (900 X 600mm) by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO TABLE 3' X 2' (900 X 600mm) WITH OUT DRAWER FD-2834/224

M&L for removing old unserviceable Top of Table 3' X 2' (900 X 600mm) with out drawer and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing

M&L for preperation of surface of 3' X 2' (900 X 600mm) wit out drawer by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

D.B ENTERPRISE

M.G. ENTERPRISE