REPAIR TO TILING FLOORING PLUMBING AND SANITARY APPLIANCES WORK AT AF STN CARNICOBAR

Amount

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm,laid over including 15mm screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Renewing of glazed tiles in patches as in floor /wall area n.exc 5 sqm including removing and cleaning old tiles , preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm,laid over including 15mm screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F coloured glazed ceramic tiles of size 350 x 250 x 7/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster in cement mortar 1:4 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,aid over incl 15 mm thick screed bed in CM (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 18-20mm thick laid over and including 20 mm thick screed bed in CM (1:6) , jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engineer-in-Charge

M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engineer-in-Charge.

M&L 20 mm thick granite (of any type) machine cut in wall/Pillar laid over incl 15mm thick cement screed in CM(1:4) laid and jointed in neat cement slurry and pointed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by the Engineer-in-Charge.

M&L rounding to edges of stone slabs one edge as in steps, cooking platform and other similar situations complete all as specified and directed by the Engineer-in-Charge.

M & L for dismantling water tanks exc 250 but not exc 500 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

M & L for dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks,triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks, triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distempering over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of antifungal acrylic emulsion paint over a coat of acrylic emulsion primer complete all as specified and as directed

Taking up or down steel water tubing and connection 15 mm dia complete all as specified and as directed.

Taking up or down steel water tubing and connection 20 mm dia complete all as specified and as directed.

S&F steel tubes, medium grade 15mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F steel tubes, medium grade 20mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15 mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.) complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.) complete all as specified and as directed.

S&F in repair vitreous china squatting 'Orissa' pattern, size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) ,lean concrete bedding in PCC 1:5:10 , trap, connection to drain, flushing pipe, complete all as specified and directed

S&F in repair Vitreous China European type WC (Pedestal pattern) complete including pedestal pan and trap including connection to drain,flush pipe, seat cover (excluding fixing bolt, flushing cistern, flushing pipe) complete all as specified and directed

M&L Vitreous china European type water closet Rimless Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set,Size 385x720x710mm, S Trap 300mm etc. complete all as specified and directed by the Engineer-in-Charge. Make: Jaquar Cat no ONS-WHT-10853S300UFSM or equivalent in Parryware/Hindware/Cera

M&L Vitreous china modular table top wash hand basin of size 595X435X185mm including stainless steel CP waste coupling 32 mm dia, waste pipe etc. complete all as specified and directed by the Engineer-in-Charge. Make: JaquarCat No KUS-WHT-35901 or equivalent in Parryware/Hindware/Cera

S&F Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern all as specified and directed by the Engineer-in-Charge.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair Vitreous China wash hand basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair PVC 10 ltr flushing cistern valveless, syphonic action type, low level , white ,with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F concealed angle cock 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed

S&F CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type stop valves suitable for 15mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs CP shower roses 125mm with or without swivel joints including fixing to 15mm dia bore steel pipe or union complete all as specified and as directed complete all as specified and as directed.

S&F in repair CP fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair Gun-metal , globe or Gate valve with iron wheel head, screwed both ends for 15mm dia bore iron pipe and fixed complete all as specified and as directed.

S&F in repair Gun-metal , globe or Gate valve with iron wheel head, screwed both ends for 20 mm dia bore iron pipe and fixed complete all as specified and as directed.

S&F in repair CP fancy type angle cock suitable for 15mm dia pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair Waste fitting 32mm bore brass chromium plate with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed for wash hand basin cast copper alloy complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia 90cm long for WHB complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia with 40/32 mm dia reducer, 90cm long for urinal outlet complete all as specified and as directed.

S&F in repair SS grating 110mm dia with waste hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia with waste hole complete all as specified and as directed.

S&F in repair SS grating 110mm dia without waste hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia without waste hole complete all as specified and as directed.

S&F in repair SS soap dish (fancy type) approximated size 160 x 160 x 90 mm complete as specified and directed.

S&F in repairs, towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms)

S & F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete.

S&F in repair glass shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repairs bib tap standard of PTMT any colour fancy type long body high pressure screwed for 15mm dia bore iron pipe and fixed (minimum weight 15 mm- 120 gms) etc complete all as specified and directed.

S&F in repairs Pillar tap standard of PTMT any colour fancy type long body high pressure screwed for 15mm dia bore iron pipe and fixed (minimum weight 15 mm- 120 gms) etc complete all as specified and directed.

S&F in repair Hand shower brass chromium plated (health faucet) with 8 mm dia and 1 m long flexible tube with brass nuts, wall hook complete all as specified and directed by the Engineer-in-Charge.

S&F PTMT Shelf fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by the Engineer-in-Charge.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 100 mm, set in cement mortar complete all as specified and directed..

S&F PVC (SWR) 110mm dia bore pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) 160 mm bore pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm dia bore iron pipe and fixed. (Minimum wt. 210 gms) complete all as specified and directed by the Engineer-in-Charge.

S & F PVC (SWR) junction single, (Single T) 160 mm bore branch piece (equal or un equal) with access doors complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) bends any radius, 160 mm bore complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) 110mm bore branch piece (equal or un equal) with access doors complete all as specified and directed by the Engineer-in-Charge.

M&L PVC (SWR) floor trap 75mm outlet dia with grating including jointing with solvent cement complete all as specified and as directed.

DHAKSHNA MOORTHY AND SON

ASHOK BISWAS

N Rathinam

Y Abulu