Renovation of Sub Divisional Data Processing Centre at Dindigul, Madurai and Geochemical Lab in Madurai

Amount

Dismantling and Cleaning away the materials

a) Brick/stone masonry in cement mortar walls under 3m high

b) Weathering Course with pressed tiles

c) Clean Removal of Plastering from wall

Reconstruction of Brick work in following Cement Mortar 1:5 using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

a) For S.S in First floor

Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:3 (One Cement and Three P-Sand) mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Painting old wood works such as doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of old and new machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying new machine pressed tiles of size 23cm x 23cmx 2cm including stacking at site.

White washing TWO coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of Old plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Renewal of damaged glass pans for window with new glass in proper postion etc.,

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying, laying and jointing CPVC (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with h ig her pipe thickness) Standard Dimension Ratio- 11)of approved quality and best variety conforming to BIS of the following dia including cutting and fixing CPVC specials using SOLVENT OF 118ML (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Below Ground level

a) 32mm dia CPVC pipe

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Above Groundlevel

a) 32mm dia PVC pipe

b) 25mm dia PVC pipe

Supplying, laying and jointing PVC Specials of approved quality and best variety following dia including labour fixing PVC Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc

a) 32mm dia Elbow

b) 32mm dia tee

c) 32mm dia coupling

d) 25mm Elbow

e) 25mm Tee

f) 25mm coupling

g) 25 x 20 Reducer Elbow

h) 25 x 20 Reducer tee

Supplying and fixing in position GI unions of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete complying with standard specifications. (The GI unions should be got approved by Executive Engineer before use on works).

a) 25 mm union

b) Supplying and fixing GI 32 mm ø Union

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

a) 25mm wheel valve

b) 32mm wheel valve

Supplying, laying and jointing CPVC Specials of approved quality and best variety following dia including labour fixing CPVC Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc

a) 32mm diaTee

b) 32 mm dia Elbow

c) 32 mm dia coupling

Supplying and fixing in position 15 mm dia brass CP screw down tap/Pillar tap (heavy duty) of approved make conforming to Bis specifications and quality including cost of shellace, thread, ect., complete complying with standard specification and including cutting and threadiing wherever necessary . ( Tap should be got approved by the Executive Engineer before use on the works)

a) 15mm dia CP Screw Down Tap

Drilling of 6" or 150 mm dia vertical bore in hard rock area of any required depth as directed by the departmental Officers including labour charges for inserting casing pipes assembles in the drilled holes excuding cost of PVC casing pipes of required length including transportation charges for Rig supporting vehicles from one place to another place etc.,complete complying with standard specification.

In Bore

Supplying PVC.CASING PIPE 160mm dia of approved quality and variety without slot to standard length of 6 metre suitable for 6" borewell including jointing the casing pipe in the PVC. Couplers with solvant materials in the drilled hole to the required depth conforming to pressured as per IS 12818/1992.The rate is inclusive of all taxes, labour charges for inserting the PVC.Pipe as directed by the Departmental Officers complying with standard specificaton. The PVC.Pipe should be got approved by the Departmental Officers before use on work. (Spl.condition) 160mm dia PVC.Casing Pipe

In Bore

Labour charges for inserting 160mm dia PVC.Casing Pipe assembly (with or without slots) in the drilled hole including jointing the pipes with PVC.Couplers with cement paste.

In Bore

Supplying and fixing of suitable PVC Bore cap using M.S.flat of size 1cm x 3mm and M.S.sheet on top with bolting arrangements for securing the cap in position for 160mm dia motor borewell as directed by the departmental officers. 160mm dia end cap

In Bore

Supplying and fixing 18mm dia nylon rope etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

In Bore

Supplying and erecting New UPVC suction submersible heavy pipe of approved quality and variety conforming toe ISI with ISI mark of the following size in bore to standard length of 6m conforming to work site, fixing specials but excluding cost of such specials cutting and threading of pipes but including jointing the pipes labour charges, for erecting of pipes in drilled bore to required depth as directed by the Departmental Officers complete complying with standard specification. The UPVC pipe should be got approved by the Departmental Officers before use on work. 32mm dia upvc Pipe Super thick (Red Colour ) Internal in bore

In Bore 32mm dia UPV Pipe

Supplying and erecting Three phase 5.00 HP 50 stage submersible pump of approved make (Texmo Taro ) confirming to IS 8034 and all cost of materials. The quality and standard of the product should b e got approved by the departmental officers before use on work. Necessary warranty card should be got approved before erection of submergible pump with all accessorites.

In Bore

Labour charges for erection of 5.00 HP submergible pump set in borewell including fixing and jointing submergible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth, valves, erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches, starter, volt metre, ammeter, three pilot (indicating) lamps, capacitor single phasing prevented, water level guard and laying and jointing the cables and twin earthern as per I.E. rules etc., complete and testing the pump set for trial run of 10 days. As directed by the departmental officers complete complying with standard specification.

In Bore

Supply of 4.00 sqmm three core flat copper cable with wire bounded punched copper conductor insulated and sheeted with PVC.for submersible pump motor with voltage grade upto 1100V confirming to and marked with IS (694-1990) complying with standard specification etc.complete.

In Bore

In Bore

Supplying and fixing in position best quality cuddapah sink of following sizes including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

a) Soild panel PVC door with frame

Supply and fixing of Vertical type 4 way Triple pole and neutral MCB Distribution board in sheet steel enclosure of double door type with metal door with IP42 protection in sheet steel enclosure with 1 No. of 40A FP Isolator as incoming and 1 Nos. of 6-32A TP MCB and 9 Nos. of 6-32A SP MCB as outgoing on suitable angle iron framework with earth connection only.The MCB DB and MCB's should be Legrand/Hager make. (DATA-1)

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD-68).

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (SD-73).

Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.(SD 127)

Supply and fixing of 3 Phase 32A aerial fuse unit for 3 Nos 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.(SD-132)

Supply and fixing of 40A FP MCB Isolator in sheet steel enclosure in flush wall with earth connection. The FP MCB & Enclosure should be of Legrand / Hager make only (DATA-2).

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour. (SD-62)

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD-56).

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD-234).

Supply and laying of 3 1/2 x 95sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD - 208)

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection. (SD - 190)

Supply and providing cable end termination of 3-1/2 x 95sqmm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD - 239)

Supply and fixing of 63A Change over switch with suitable angle iron frame work with MS cable entry boxe swithe arth connection only. (DATA - A)

Earthingas per PWD standard with an earth electrode of 2 metre Class 'B' Gipipe of dia not less than 32mm complete with necessary masonry work. (SD - 234)

Supplying and fixing of Exide XP880 12V - 88 AH

Individual

Individual

E S BUILDERS