Permanent Restoration of Construction of Vented Causeway Jandi to Jandi Bagh (Under UT Capex 2025-26)

Design/Construction of 23.40 Rmts span Vented Causeway (single lane motorable minimum 7.5m carriageway width with RCC with railing), with soil investigation, construction of diversion and its maintenance during execution with dewatering complete. Structures "Abutments, Return wall, Curtain wall, Vent wall, RCC Bed & Slab including railing with painting along with approach wall of 5m length on each side (Total= 20m), and vetting of design/drawing duly approved by Department of lIT/NIT/DIQC Complete Job. (As per MORTH/IRC Specifications of road and bridges)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres in All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Centring and shuttering including strutting propping etc and removal of form work Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Hand packing stones in wire crates including the cost of stones and cost of crates.

Dumping stone including cost of stones. in Horizontal on level

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work

Providing , laying, spreading and compacting crushed stone aggregate of 63 mm to 45 mm sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming of 13.2 mm nominal size (Type - A) screening/binding material as stone dust to fill up interstices of coarse aggregate, watering and compacting to the required density, finished work to be measured including all leads, lifts and carriage of material by MT/ H.L. (conforming to clause 404 of MORT&H specifications).

carriages of materials by mechinical transport incl. loading, unloading and stacking complete.

Sand for a lead of 4 kms.

Stone Agg upto 40 mm size avg lead of 04 km

Stone Agg above 40mm by avg lead of 04 km

Carriage of stone boulder for an average lead of 4 kms.

Please Enable Macros to View BoQ information