SPL REPAIR TO BLDG NO T 1 AT HQ CENTRAL COMMAND MAP DEPOT AND PROVN OF FLOOR TILING AND ALLIED WORKS AT ADM BLOCK OF CCCIU UNDER GE WEST LUCKNOW

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Demolition of wall and ceiling boards (fibre, pulp,insulation etc ), any thickness, including cover fillets complete all as specified and directed.

S&F 'E' board 600x600x4mm thick white prelaminated reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction.Make-Everest/Diamond

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position in unframed work.complete all as specified and directed.

S & F MS framed work as in truss, purlin or rafter of angle iron including distance pieces cleats etc of Fe410-w(Gde E-250) quality-A complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including 10mm thick rendering in cm 1:4 complete all as specified and directed.

M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.18 but n exc 0.38 Sqm set over and includind 15mm thick screed in cement mortar 1:6 and pointed incl white or colour cement to match the shade of tile complete all as specified and directed

Same as item No 11 above but work as on vertical surfaces as in skirting but on 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.

M&L preparation of plastered surface of walls and applying two coats of oil bound distemper over and incl.one coat of birla white wall care putty manufactured by M/S Grasim Industries ltd or JK wall putty manufactured by M/S JK cement Ltd complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper over and incl.one coat of birla white wall care putty manufactured by M/S Grasim Industries ltd or JK wall putty manufactured by M/S JK cement Ltd complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) area exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and directed.

M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed.

M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed.

M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plane, chamfered or rounded, fitted without sash barss complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc.complete all as specified and directed.

S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications complete all as specified and directed.

Supply & fix MS Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and directed.

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply & fix stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows complete all as specified and directed.

Supply& fix 150mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M& Labour for cutting and chaseing in brick wall for concealed GI tubing and making good complete all as specified and directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site all as specified.

Same as item 37 above but 20 mm dia bore.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 15 mm bore CP brass centre hole basin mixer quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed. Make ESSCO Jaquar Cat NoTQT516A/Hindware Cat No F280009CP

S&F Brass Chromium plated hot & cold water wall mixer 2 in1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified . Make ESSCO Jaquar Cat NoTQT517B/Hindware Cat No F280018CP/Parryware G3316A1

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and directed.

Supply & Fixing in repair cast copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with capstain headcomplete all as specified and directed.

Supply & Fixing in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified and directed.

Supply & Fixing in repair CP shower rose fancy type125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.

Supply and fixed in repair PVC rotational moulded over head storage tank 500 Lts capacity including 20mm dia PTMT float valve complete all as specified and directed.

Supply and fixing in repairs of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia and PVC waste pipe,complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

M&L in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply & fix in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.

S&Fin repair PVC (SWR) pipes in any length fixed to wall 110 mm bore complete all as specified and directed.

S&Fin repair PVC (SWR) pipes in any lenth fixed to wall 75 mm bore complete all as specified and directed.

S&F PVC bends 110 mm bore complete all as specified and directed.

Same as Item No 58 as above but 75 mm bore.

S&F PVC (SWR) vent cowls suitable for 110mm bore pipes complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.

Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

Demolition of RCC in ground floor and paving n exc 15cm thick ( below or above ground level) complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified and directed.

M&L Mild Steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 75mm thick plane cement concrete 1:3:6 typeC-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

M&L for Vitrified tiles double charged in floor dark shade as approved size 10mm thick area of each tile exc 0.42 but n exc 1.00 Sqm laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with and incl white or colour cement to match the shade of tiles complete all as specified and directed.

Same as item No 68 above but work in vertical surfaces as in skirting but on 10 mm thick rendering screed complete all as specified and directed.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed in CM 1:4 complete all as specified and directed.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 110 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Contd.......

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: 1. Glazed shutter float glass thickness not less than 5mm and wire mesh shutter with stainless steel wiremesh 0.36 mm dia with aperature 1.40mm shall also be deemed included in quoted rates and no extra payment will be made separately 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofand similar work conforming to Fe.290.Gde-E-165

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

M & L 15mm thick rendering on brick work in CM 1:4 with water proofing compound @ 3% by wt of cement finished fair and even including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed. NOTE- WPC shall be measured & paid separetly.

M & L for PCC 1:2:4 type Bo as in bed blocks lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Supply only integaral water proofing compound ISI marked complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exc half brick but nex one brick complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggrgate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including foarm work complete all as specified and directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc as directed.

M&L for point wiring for following with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

One light/fan point controlled by one switch

One socket outlet point 5 Amp on an independent board

Same as item no 86.02 but on the same board

All as item no 86 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board including 2.5 sqmm earth continuty conductor.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

Same as item 88 but 15 Amps

S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed.

S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and as directed at site.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . (Note: MCCB & MCB to be measured and paid seprately)

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule)

S&F MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete complete all as specified and directed.

S&F MCB SPN 40 to 100 Amp 415 volts 10 KA breaking capacity C-series complete all as specified and directed.

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity C -series as directed.

M&L for two single core PVC insulated FRLS cable 4.0 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

Supply and fixing FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed. Make: HAVELLS cat Part No. REGALBATTEN8UPTO1X22WDSBSWH ,Eveready model Easylite box cat no INBOXFR1X18W,HPL LED legacy cat no HLPLEDT820(CW)

Supply and fixing FTL with ultra bright crystal LED tube light, 18 W ,6000 K with high efficiency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed. Make: HAVELLS cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS/ Phillips LED Glass tube cat no Essential LED tube 1200mm 20W 865 T8 IND,

S&F 70 W flood light LED fitting Warm/day cool as required, IP 65 protection with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and as directed . Make: HAVELLS Jeta quanto plus with cat Part No. JETAQUANTOPLUSFLP30WLED757SYMLENS/ C&S Orion 1.0 with cat Part No.(LTEFI 30W HP LED)/ PHILIPS (ESSENTIAL SMARTBRIGHT FLOOD) with cat Part No. BVP161LED30CW/NW/WW PC WB

S&F super bright LED (2X2), 36 W, 6000 K recess mounting with high efficient LED source with fixture size :(LxHxW) in (595x595x65) all as specified and directed.Make:Surya CELESTA with cat Part No.SLE DS36 22R, Make: C&S CYGNUS-C with cat Part No.LTCRP36WLED2x2, Philips TROFFER cat part no.: RC370B LED36S -6500/4000G5L60W60

S&F LED building/street security light 35 Watt with high power LED source (>110lumen/watt) PDC housing, IP65/66 with 4 KV inbuilt surge protection driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make: HAVELLS(ENDURAPERAL) cat Part NoENDURAPERALSL25WLED757SSYTOPCMP/ C&S (Indus Series) with cat Part No.LTESS25WLED/LS/ PHILIPS(GREENLINE SMART) with cat Part No BRP042LED25CWR1S1PSU GR

Supply and fixing of ceiling fan complete with blades, down rod, electronic regulator and accessories, single phase 230/240 volt of size 1400 mm sweep. Min air delivery 265 CFM with service value 6.00 BEE, STAR RATED with brushless direct current motor (BLDC) Opal white incl making connection with the twisted copper flexible wire 23/0.076mm complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers, copper winding and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 25 Sq mm 4 core stranded conductor nominal cross section complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n. exc 1.5m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositeing where directed at a level n exc 1.5 m above the strting point complete all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed. Note: Punned thickness shall be measured for payment.

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed.

M&L in repair for 40 mm bore GI tubing (light grade) with all necessary fittings laid in trenches /under road crossing fixed on poles, wall under floor etc.complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed.

rajan construction

M/s Chandra Mohan and Sons

M/s Sultan Khan