Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.9 L+₹9,217.58 (0.24%)Rejected-Finance C O PULOKE NEOGI SURYA SEN PALLY PO KADAMTALA 734011 DIST DARJEELING WB | KADAMTALA | DARJEELING | WEST BENGAL | 734011 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹38.0 L+₹19,594.98 (0.52%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹38.0 L+₹23,884.48 (0.63%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹38.1 L+₹35,752.48 (0.95%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bagdogra
GE AF Bagdogra Bagdogra Airport PO, Dist Darjeeling, WB - 734421
CONSTRUCTION OF SALVAGE STORE AT 20 WING AF STN UNDER GE (AF) BAGDOGRA
2023_MES_583507_1
8477/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Bagdogra
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bagdogra
₹48,000
Yes
4 Apr 2023
1 Mar 2023
22 Mar 2023
1 Mar 2023
20 Mar 2023
15 Mar 2023
Amount
Surface Excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.
Excavation in post hole or similar holes each n.exc 0.50 Cum, getting out, returning filling in and ramming earth around in layers n.exc 25 cm, watering and removed surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed.
M&L for Cement concrete, type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and as directed.
M&L for RCC M-30 (using 20mm graded coarse aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC M-30 (using 20mm graded coarse aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC M-30 (using 20mm graded coarse aggregate) as in beams, cantilevers, bressumers, lintels etc complete all as specified and as directed.
M&L for RCC M-30 (using 20mm graded coarse aggregate) as in Chajjas complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc. rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and as directed.
M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in 1:6 complete all as specified and as directed.
M&L for 15 mm thick rendering in two layers, 1st coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions on other than fair faces of brick work or concrete surfaces finished even and fair complete all as specified. Note: WPC will be measured and paid separately as supply only.
Supply only water proofing compound.
M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finish even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of surfaces of wall and applying two coats of exterior weather coats over a coat of weather coat exterior primer for camouflage design including necessary scaffolding complete all as specified and as directed.
M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and directed.
Returning, filling in, soft/loose soil, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated materials (Soils) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.
M&L for hard core of gauge not exceeding 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and well rammed to a true surface all as specified and as directed.
M&L for 100mm thick PCC (1:3:6), type C2 (using 40 mm graded stone aggregate) as in sub base floor complete all as specified.
M&L for 100mm thick PCC (1:2:4), type B2 (using 40 mm graded stone aggregate) as in flooring, path etc laid in panels, finishing even and fair without using extra cement complete all as specified.
M&L for PCC, 1:3:6, type C2 (using 40mm graded stone aggregate), 75mm thick as in plinth protection/ path/ paving laid in panels, finishing the top surface even and smooth without using extra cement complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 100mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified and as directed.
M&L for forming Contraction (Dummy) joints 65mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified and as directed.
S&F Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges with steel handle and steel peg stay complete all as specified.
S&F Steel windows with side hung shutters without glazing bars, dovetailed or welded including projecting type hinges with steel handle and steel peg stay complete all as specified.
M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F galvanized steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F 2nd class hard wood, 30mm thick, Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.
S&F 100mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.
S&F 200mm Aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.
S&F 300mm long aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.
M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.
S&F MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing capping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams along with 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminary/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed by Engr-in-Charge for the following :- (a) One light point or one fan point controlled by one switch with cables 1.5 Sq mm size.
All as per ser item No. 46 above, but with 4.0 Sqmm (36/0.30mm) PVC copper multistranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper multistranded conductor as earth wire all as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed.
S&F switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC all as specified and directed.
S&F stepped type electronic fan regulator flush type complete all as specified and directed.
S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish complete all as specified & directed.
S&F ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish all as specified and directed.
S&F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and efficacy should not less than100 lumen/watt complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified & directed.
S&F of MCB SP / Isolator 6-32 Amps (upto 40 Amps), 230 Volts, 50 Hz with 10 KA, 'C' series all as directed.
S&F of MCB SPN/ DP upto 32 Amps (upto 40 Amps), 230 Volts, 50 Hz with 10 KA, 'C' Series complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanized earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanized incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. Note:- the earth resistance should be less than two ohms and GI protection pipe and earth lead more than 7.5 RM shall be measure and paid separately.
M&L for Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified & directed by Engr in Charge.
M&L for earth result marker board of MS sheet 3.15 mm thick with suitable board size of MS flat of 30 X 20cm and 1.2 mtr long and 1 mtr above ground level after proper grouting in ground with suitable PCC work and painting with suitable colour all as directed. Note :- Legend to be used for Shapes, size and colour of paint as per existing nature of earthing or as directed.
S&F Air termination copper rod 12 mm dia, 1.00 mtr long single point including base plate all as per site requirement and directed.
Supply, fixing and brazing of Earth continuity conductor with adequate size insulator fixed to wall on batten or recess or any other indicated situation for loop earthing etc. as required 20 mm x 3.15 mm copper strip complete all as specified and directed.
M&L for Earthing complete with copper earth plate electrode 60cm x 60cm x 3.15mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl copper strip 20 x 3mm by means of nuts & bolts, check nuts and washers of brass incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25 x 25 x 3mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 40mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate no 3 of MES SSR Part I 2009 connected board all as specified and testing on completion. Note:- The earth resistance should be less than two ohms and GI protection pipe and earth lead more than 7.5 RM shall be measure and paid separately.
M&L for 32 mm bore GI pipe light grade, ISI marked for earth strip/ lightening arrester protection with all fixing accessories for copper strip such as, Nut bolts and washers insulator with necessary PCC/brick work for fixing GI pipe etc complete all as specified and directed by Engr -in -Charge.
Supply, fixing and laying in trenches after removing old cable and fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 25 Sqmm, 4 Core with XLPE insulated stranded aluminum conductor served with an inner sheathing of PVC tape, armored with galvanized steel wire and overall sheathed including cable gland, lugs, jointing material etc, including jointing, connecting, testing and commissioning complete all as specified and directed.
All as per Ser item No. 64 above, but with 10 Sqmm 4 Core, laid in trenches/ pipe complete all as specified and directed.
M&L for sand cushioning to under ground cables complete all as specified and as directed.
M&L for brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
Supply, installation, testing and commissioning of 16M high mast lighting system with its accessories with 3 point suspension system with modern engineering practices. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 grade S355, hot dip galvanized confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875 and not less than 180Km/Hr. It shall also include accessories for 'high mast including head frame, steel carriage arrangement suitable for 8 LED luminaries of 150 watts 'symmetrically & its control gear boxes and lightening final. The mast shall have an integral power tool installed inside the base compartment for its operation. LED floodlight luminaries including all accessories and silicon filled potted driver, IP-66 protection, Model-LFLN-150-CDL/60 of CROMPTON Driver must have BIS registered to be provided. One No. LED aviation obstruction lights up to 10Watt, 240V with comprising of aluminum housing with red polycarbonate dome for better illumination, IP 66 protection to be provided. Necessary foundation PCC/RCC and earth work for removal and returning, refilling of soil etc with the following specification within the quoted rate and after obtaining necessary approval from Engr-in-Charge:- (a) Foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates to be provided. Design, casting of suitable R.C.C foundation with M-20 grade concrete considering SBC of soil as 10T/Sq Mtr (after cutting of concrete & bitumens road) to be carried out as directed by Engineer-in-Charge. (b) Supply, installation & commissioning of the feeder pillar/ inbuilt control panel with housing 32 A TPN MCB incomer, double dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor and with provision of electric power cables from panel to luminaries and its internal connection complete all as specified and directed.
Supply and laying in replacement of Tubes, 'light grade', galvanized iron, 100mm dia laid in trenches for cable protection at road crossing etc including necessary making good or fixing on wall/ poles of any type, secured with clamps and required boring under road or hard surfaces complete with all fittings laid in trenches all as specified and directed.
M&L for boring holes under road, pavement, hard standing by trenches technology using ultra sound technique and machinery for laying of underground cables complete all as specified and directed.
SHRI P P SHARMA
M/s Chakraborty Enterprise
NIRANJAN SARKAR
M/S SWAPAN KUNDU
M/S Banerjee construction co
M/S SUNNY ENTERPRISE
M/S ALPHA BETA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .