Provision of Hightmast Arrangement at Near Chowk Churaha in Chowk Kaliji Bazar ward in Zone-06

Supply and fixing of 10 mtr. G.I. Octagonal pole of approved make (top dia 100 mm, Bottom dia 200 mm & Base plate 16 mm thick) having 3 mm, thickness with single arm bracket length of I mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T& P complete in all respect. as per dir E/I

Supply and fixing of factory wired intcgral LED. Flood light Iuminaires with dic cast aluminium housing wih toughend glassUV stabilized PC Cover and lenses built with mandatoy driver setsuitable for 170 to 200 Watt. Confirning io IP 66, IK 07 and above protection complete in all respect including Labour.20400-24000.syslem, lumens, High power LED with lenses, >120, Lm/W, P.F.>0.95, THD <I0% at full load, CRI >70, Polted driver Set in Melal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-stsrt feature, 4 KV internal Surge Protection, with 5 years warrantee

S/F Six arm bracket made of M.S. channel fixed in, rectanguler shape with Nut & bolt with support of m.s.channel on 1mtr.Long m.s. Pipe sylender with having arrangement of 06Nos. LED flood light Fitting to give unifrom light on road surface Comp. in all resp. As per specifitacion & desigen & drawing of E/I .

Supply and laying of 16sq. mm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and fixing 16sq. mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.

Boaring (Buggi) for Cabling work below 3.5mt ground level including HDPE Pipe

Supply and burring of safe Earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm inner pipe 25, terminal Dia 12 mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive Mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I frame with hinged Cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I strip will be extra)

S/F 40Amp. TPN automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO-100 series with contractors HRC fuses isolating switch metering instrument & instrument box with CTS etc. in case of TPN, complete in all respect.